최근 배기 규제가 자동차 엔진에 국한되지 않고 노외용 소형엔진 부분에서도 세계적으로 강화됨에 따라, 배 기규제에 대응하기 위하여 기존 노외용 소형엔진의 기화기 방식에서 벗어나 전...

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A103325699
2011
Korean
KCI등재
학술저널
2005-2010(6쪽)
4
0
상세조회0
다운로드최근 배기 규제가 자동차 엔진에 국한되지 않고 노외용 소형엔진 부분에서도 세계적으로 강화됨에 따라, 배 기규제에 대응하기 위하여 기존 노외용 소형엔진의 기화기 방식에서 벗어나 전...
최근 배기 규제가 자동차 엔진에 국한되지 않고 노외용 소형엔진 부분에서도 세계적으로 강화됨에 따라, 배 기규제에 대응하기 위하여 기존 노외용 소형엔진의 기화기 방식에서 벗어나 전자연료 분무방식으로의 전환이 필요하 게 되었다. 본 연구에서는 400cc 가솔린 엔진용 인젝터의 연료공급 특성을 실험적으로 분석하였으며, 이를 토대로 소 형엔진에 적합한 인젝터를 선정하였다. 분무질량분포 측정장치를 통하여 3홀 및 6홀인젝터의 분무질량분포 특성을 분 석하였다. 가시화 실험 장치를 통하여 각 인젝터의 분무각, 분무도달거리 및 분무폭을 분석하였다. 분무질량분포 실험 및 분무 가시화 실험을 통하여 분무특성이 우수하고 안정적인 분무를 형성하는 6홀 인젝터를 소형엔진용으로 선정하였다.
다국어 초록 (Multilingual Abstract)
Since recently exhaust gas regulation for a non-road small engine as well as commercial vehicle engine has been enforced, a carburettor of a small engine should be replaced by an electronic fuel injection system. In this study, the spray characteristi...
Since recently exhaust gas regulation for a non-road small engine as well as commercial vehicle engine has been enforced, a carburettor of a small engine should be replaced by an electronic fuel injection system. In this study, the spray characteristics of the 400cc gasoline small engine injector has been experimentally analyzed. Based on the experimental results, suitable injector for the small engine has been selected. Through the test rig measuring spray mass distribution, fuel distribution characteristics of 3 hole- and 6 hole-injector has been analyzed. Through the visualization equipment, injector spray angle, penetration length and spray width have been measured and analyzed. Considering spray characteristics and stability, 6 hole-injector is selected for the 400cc gasoline small engine.
참고문헌 (Reference)
1 이상인, "가솔린엔진용 포트분사식 인젝터의 분무특성에 관한 연구" 한국액체미립화학회 15 (15): 62-67, 2010
2 M. Yoshida, "Study on Electronic control of Air-Fuel Ration and Ignition Timing for Small Gas-oline Engine, SAE 2001-01-1861"
3 W.A. Schuster, "Small Technology" Delmar Publishers 1999
4 T. Tokui, "Small Engine Catalyst for US Emission Regulations, SAE 2002-32-1837"
5 K. H. Lee, "Measurement of Spray Characteristics for Gasoline Injector Using the Image Processing Technology" 5 (5): 68-74, 2000
6 B. Kobayashi, "Investigation of Port Design for Small Air-Head Stratified Scavenging Two-Stroke Cycle Engine, SAE 2005-32-0012"
7 M. Sivakumar, "Flow Field Analysis of a Carburettor Using CFD, SAE 2005-26-058"
8 J. Bin, "Emission Control Strategy and Technologies on Chinese-Made Four-stroke Non-Road Small Spark-Ignition Engines, SAE 2005-32-0052"
9 P. Stuecke, "A Two-Stroke Chain Saw Engine to Fulfil Current Tier Emission Levels, SAE 2005-32-0101"
1 이상인, "가솔린엔진용 포트분사식 인젝터의 분무특성에 관한 연구" 한국액체미립화학회 15 (15): 62-67, 2010
2 M. Yoshida, "Study on Electronic control of Air-Fuel Ration and Ignition Timing for Small Gas-oline Engine, SAE 2001-01-1861"
3 W.A. Schuster, "Small Technology" Delmar Publishers 1999
4 T. Tokui, "Small Engine Catalyst for US Emission Regulations, SAE 2002-32-1837"
5 K. H. Lee, "Measurement of Spray Characteristics for Gasoline Injector Using the Image Processing Technology" 5 (5): 68-74, 2000
6 B. Kobayashi, "Investigation of Port Design for Small Air-Head Stratified Scavenging Two-Stroke Cycle Engine, SAE 2005-32-0012"
7 M. Sivakumar, "Flow Field Analysis of a Carburettor Using CFD, SAE 2005-26-058"
8 J. Bin, "Emission Control Strategy and Technologies on Chinese-Made Four-stroke Non-Road Small Spark-Ignition Engines, SAE 2005-32-0052"
9 P. Stuecke, "A Two-Stroke Chain Saw Engine to Fulfil Current Tier Emission Levels, SAE 2005-32-0101"
GMA용접 공정에서 콘택트팁 마모가 용접비드에 미치는 영향
TM Joint의 물리치료를 통한 훈련이 모음의 음향학적 특성에 미치는 영향
수상인명구조 교육 참여 대학생들의 목표지향, 몰입경험 및 자아성취감에 관계된 요인
학술지 이력
| 연월일 | 이력구분 | 이력상세 | 등재구분 |
|---|---|---|---|
| 2026 | 평가 | 재인증평가 신청대상 (재인증) | |
| 2020-01-01 | 등재 | 등재학술지 유지 (재인증) | ![]() |
| 2017-07-01 | 등재 | 등재후보로 하락(현장점검) (기타) | ![]() |
| 2017-07-01 | 등재 | 등재학술지 선정 (계속평가) | ![]() |
| 2015-01-01 | 등재 | 등재학술지 유지 (등재유지) | ![]() |
| 2011-01-01 | 등재 | 등재학술지 유지 (등재유지) | ![]() |
| 2008-01-01 | 등재 | 등재학술지 선정 (등재후보2차) | ![]() |
| 2007-08-28 | 학술지등록 | 한글명 : 한국산학기술학회논문지외국어명 : Journal of Korea Academia-Industrial cooperation Society | ![]() |
| 2007-07-06 | 학회명변경 | 영문명 : The Korean Academic Inderstrial Society -> The Korea Academia-Industrial cooperation Society | ![]() |
| 2007-01-01 | 등재 | 등재후보 1차 PASS (등재후보1차) | ![]() |
| 2005-01-01 | 등재 | 등재후보학술지 선정 (신규평가) | ![]() |
학술지 인용정보
| 기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
|---|---|---|---|
| 2016 | 0.68 | 0.68 | 0.68 |
| KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
| 0.66 | 0.61 | 0.842 | 0.23 |