전기차 일체형 모터 감속기 축 거동과 기어 진동 상관관계에 대한 연구 = An Investigation on the Correlation between Integrated Electric Motor Reducer Shaft Movement and Gear Vibration

다국어 초록 (Multilingual Abstract)

Dynamic and static shaft eccentricity in integrated electric motor-reducers can lead to variations in the motor air gap and elevate both the motor and gear noise levels. This study investigates the effects of static and dynamic eccentricity, along with the presence of wave washers, on the gear noise of an integrated electric motor-reducer system. The results indicate that shaft eccentricity substantially increases both the orbit radius and width magnitude, with enhancements of up to 1.33 times and 4.57 times, respectively, under static and dynamic eccentricity conditions. Although the axial motion remains relatively small(under 10μm), its magnitude is intensified by the absence of wave washers and the presence of eccentricity. A novel correlation between shaft motion and gear vibration was identified, illustrating that shaft movement induced by eccentricity has a direct impact on gear meshing dynamics. The absence of wave washers, coupled with static eccentricity, was associated with a maximum increase of 25dB in gear vibration. These findings underscore the critical importance of closely regulating shaft eccentricity and related parameters to optimize motor-reducer performance and minimize gear noise in electric vehicles.

참고문헌 (Reference)

1 He, S., "Three Dimensional Electromagnetic and NVH Analyses of Electric Motor Eccentricity to Enhance NVH Robustness for Hybrid and Electric Vehicles" SAE 2020

2 Dupont, J. B., "Simulation of the Noise Radiated by an Automotive Electric Motor : Influence of the Motor Defects" 3 (3): 310-320, 2014

3 Joshi, Y. V., "Gear Interference-fit Joint Considerations and Design for the Resultant Tooth Distortion" SAE 2018

4 Park, S. K., "Dynamic Charatristics of a Rotor-journal Bearing System Driven by Gearboxes" 5 (5): 565-576, 1995

5 박성준 ; 이진우, "Cross-section Design of Hollow Shafts to Improve Static and Vibration Characteristics of Rotating Shafts" 34 (34): 432-439, 2024

6 Zhang, A., "Analysis of Nonlinear Vibration in Permanent Magnet Synchronous Motors under Unbalanced Magnetic Pull" 8 (8): 113-, 2018

7 Ruf, A., "Analysis and Determination of Mechanical Bearing Load caused by Unbalanced Magnetic Pull" 35 (35): 728-743, 2014

8 Lee, H. K., "An Experimental Investigation of the Correlation between Shaft Static and Dynamic Eccentricity, Counter Electromotive Force, Magnetic Flux Density and Gear Noise in Motor Reducer Systems" 2024

9 손기성 ; 전형섭 ; 박진호 ; 박종원, "A Technique for Vibration Measurement and Roundness Assessment of Rotating-axis using Camera Image" 24 (24): 131-138, 2014

10 Lee, H. K., "A Study on the Correlation between Integrated E-motor Reducer Shaft Movement and Gear Noise" 353-, 2024