폴리올 에스테르 등의 에스테르 윤활제는 생분해성 및 윤활성능이 우수하여 금속가공유 및 유압작동유등의 윤활기유로 많이 사용되고 있다. 본 연구에서는 윤활성 향상제로 사용하기 위하...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A82565598
2011
-
500
KCI등재,SCOPUS,ESCI
학술저널
196-202(7쪽)
3
0
상세조회0
다운로드국문 초록 (Abstract)
폴리올 에스테르 등의 에스테르 윤활제는 생분해성 및 윤활성능이 우수하여 금속가공유 및 유압작동유등의 윤활기유로 많이 사용되고 있다. 본 연구에서는 윤활성 향상제로 사용하기 위하...
폴리올 에스테르 등의 에스테르 윤활제는 생분해성 및 윤활성능이 우수하여 금속가공유 및 유압작동유등의 윤활기유로 많이 사용되고 있다. 본 연구에서는 윤활성 향상제로 사용하기 위하여 알킬 무수 숙신산과 여러 가지 지방 알콜과의 축합반응을 행하여 알킬 숙시네이트 유도체를 합성하였다. 합성된 알킬 숙시네이트 유도체의 구조는 1H-NMR 및 FT-IR 스펙트럼으로 분석하였으며 GC 크로마토그램을 통하여 화합물의 순도를 확인하였다. 또한, 합성 유도체의 기본물성으로 점도특성, 굴절률, 전산가, 유동점 등을 측정하였으며 응용물성으로 윤활특성을 SRV 시험기와 4-ball 마모 시험기로 마찰계수(COF) 및 마모흔 직경(SRV WSD 및 4-ball WSD)을 측정하여 평가하였다. 기본물성 평가결과, 점도 특성, 굴절률 및 유동점은 알킬 숙시네이트 유도체에 함유된 알킬기의 탄소수가 증가할수록 높아졌으며 전산가는 0.2~4 mgKOH/g를 나타내어 금속가공유 및 유압작동유의 윤활제로 사용가능함을 알 수 있었다. 윤활성능 평가 결과, SRV WSD 0.391~0.689 mm, SRV COF 값은 0.110~0.138, 4-ball WSD 값은 0.49~0.55 mm를 나타내어 에스테르의 구조에 따라 차이를 나타내었다. 특히, SRV 시험에서 비교물질로 사용된 폴리올 에스테르인 TMPTO와 윤활성능을 비교하였을 때 SRV WSD 결과, 알킬기에 따라 다른 차이를 나타냈지만 비교물질에 비해 비교적 우수한 값으로, SRV COF 결과, 알킬기에 대한 영향을 받지 않고 비교물질에 비해 약간 떨어지는 값을 나타내었다.
다국어 초록 (Multilingual Abstract)
In this paper, a series of alkyl succinic acid esters for base oil were synthesized by condensation reaction of succinic anhydride and fatty alcohol. The structures of the synthesized esters were confirmed by 1 H-NMR, FT-IR spectrum and GC analysis. B...
In this paper, a series of alkyl succinic acid esters for base oil were synthesized by condensation reaction of succinic anhydride and fatty alcohol. The structures of the synthesized esters were confirmed by 1 H-NMR, FT-IR spectrum and GC analysis. Basic properties of esters such as kinematic viscosity (KV), refractive index (RI), total acid number (TAN) and pour points were measured and lubricating properties such as SRV wear scar diameter (SRV WSD), fraction coefficient (COF) and 4-ball wear (4-ball WSD) were also evaluated. As the results of basic properties, KV, RI and pour point of synthetic esters increased as the carbon chain of the esters increased. Measurement value of total acid number (TAN) was indicated between 0.2~4 mgKOH/g, and that metal working fluids and pressure working oils are acceptable to use as base oil. Also, lubricating properties of the esters showed as follows: 0.391~0.689 mm of SRV WSD, 0.110~0.138 of SRV COF and 0.49~0.55 mm of 4-ball WSD depended on the structure of the esters. In a comparison on the lubrication capacity of the SRV test based on polyester TMPTO, SRV WSD result showed that a better performance caused by the alkyl group. On the other hand, SRV COF test was not influenced of the alkyl group which the capacity of the lubricant was sightly diminished than the comparison material, regardless of the alkyl group.
참고문헌 (Reference)
1 W. A. Affens, 63 : 543-, 1984
2 U. Nestor, 85 : 25-, 2006
3 R. O. Dunn, 72 : 895-, 1995
4 P. A. Bertrand, 16 : 201-, 2004
5 B. G. Hermann, 41 : 7915-, 2008
6 J. J. Dickert, 32 : 647-, 1967
7 S. Jahanmir, 109 : 577-, 1987
8 A. M. Barnes, 34 : 389-, 2001
9 S. C. Cermaka, 33 : 132-, 2011
10 Robson, "U. S. Patent 5,972,852"
1 W. A. Affens, 63 : 543-, 1984
2 U. Nestor, 85 : 25-, 2006
3 R. O. Dunn, 72 : 895-, 1995
4 P. A. Bertrand, 16 : 201-, 2004
5 B. G. Hermann, 41 : 7915-, 2008
6 J. J. Dickert, 32 : 647-, 1967
7 S. Jahanmir, 109 : 577-, 1987
8 A. M. Barnes, 34 : 389-, 2001
9 S. C. Cermaka, 33 : 132-, 2011
10 Robson, "U. S. Patent 5,972,852"
11 Anderson, "U. S. Patent 5,798,331"
12 W. Bruce, Hotter, "U. S. Patent 3,785,981"
13 Maurits Krukziener, "U. S. Patent 3,331,776"
14 Elomari, "U. S. Patent 2010/0311625"
15 Colin A, "Macinsey report, Agglomerations, The International Detergent Newsletter"
16 Afton Chemical Corporation, "KR-A-1020060048672"
17 Ciba Holding Inc, "KR-A-1020050046781"
18 Ethyl Corp, "KR-A-1019960010840"
19 "American Society for Testing and Materials" ASTM designation 2000
20 "American Society for Testing and Materials" ASTM designation 2000
21 "American Society for Testing and Materials" ASTM designation 2005
22 "American Society for Testing and Materials" ASTM designation 2000
23 "American Society for Testing and Materials" ASTM designation 2000
물리화학적 처리에 의한 일라이트 점토광물의 입도조절 및 분산특성
열처리 온도에 의한 구조 결정성이 탄소섬유의 전자파 차폐 성능에 미치는 영향
TMTD, MBTS, CBS 촉진제의 구조가 실리카로 충전된 천연고무 복합소재의 가황 및 물성에 미치는 영향
고분자 전해질 연료전지 스택용 고무 개스킷의 노화특성 연구
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2023 | 평가예정 | 해외DB학술지평가 신청대상 (해외등재 학술지 평가) | |
2020-01-01 | 평가 | 등재학술지 유지 (해외등재 학술지 평가) | |
2013-12-01 | 평가 | SCOPUS 등재 (등재유지) | |
2011-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2010-02-19 | 학술지명변경 | 외국어명 : Journal of the Korean Industrial and Engineering Chemistry -> Applied Chemistry for Engineering | |
2009-04-28 | 학술지명변경 | 외국어명 : Jpurnal of the Korean Industrial and Engineering Chemistry -> Journal of the Korean Industrial and Engineering Chemistry | |
2009-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2007-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2005-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2002-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
1999-07-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.32 | 0.32 | 0.34 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.33 | 0.33 | 0.45 | 0.05 |