A Study on Characteristics of Dimensional Accuracy using Planning Number of Machining in Machining Center = 머시닝센터 평면가공 시 가공횟수에 따른 치수정밀도 특성에 관한 연구

다국어 초록 (Multilingual Abstract)

The face milling cutter, which is mainly used for the face milling, is used to cut the Carbon steel(SM20C) in the machining center for 5 times and 10 times respectively. This study clarify the dimensional accuracy characteristics according to the number of fine machining varied the condition of cutting depth, table feed speed and spindle speed. Cutting depth is varied 0.05～0.2mm, table feed speed is varied 0.05～0.2mm/min and spindle speed is varied 1500～2500rpm.
As a result, the dimensional accuracy was stable 6 times machining with table feed speed 150mm/min and 10 times machining with table speed 100mm/min and cutting depth 0.05mm regardless times of machining.

목차 (Table of Contents)

• ABSTRACT
• 1. Introduction
• 2. Coordinate measuring machine theory
• 3. Experiment device and method
• 4. Experiment results and discussion
• REFERENCES
• 5. Conclusions

참고문헌 (Reference)

1 최종근, "엔드밀 가공의 정밀도 향상을 위한 최적정삭여유에 관한 연구" 한국생산제조학회 13 (13): 9-15, 2004

2 서상원, "밀링에서 기하학적 표면조도와 측정조도의 선형보정 방법에 관한 연구" 한국기계가공학회 15 (15): 15-20, 2016

3 Yoon, J. H., "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball Endmill on a Machining Center" 7 (7): 99-103, 1998

4 Seong, C. H., "Characteristics of Surface Roughness in the High Speed Micro Turning of Aluminum Alloy" 16 (16): 94-100, 1999

5 Jun, J. U., "Analysis of Cutting Specific in Non-ferrous Metal by Changed rake-angle and feed-rate adjustment at Turning" 10 (10): 1-6, 2001

6 윤종학, "AI합금의 고속 원통가공에서 발생하는 치수오차와 진원도의 영향 고찰" 한국생산제조학회 10 (10): 17-24, 2001

7 Park, J. N., "A Study on the Cutting Characteristics of Ti-6Al-4V Alloy in Turning Operation" 3 (3): 81-87, 2004

8 Jang S. M., "A Study on the Analysis of Tool-wear Patterns and Mechanisms in Face Milling" 16 (16): 24-29, 1998

9 Chung, M. S., "A Study on Transition of Dimension Error and Surface Precision in High Speed Machining of AI-alloy" 9 (9): 96-102, 2000

10 정판곤, "3차원 측정기를 위한 원자간력 프로브 성능 연구" 한국생산제조학회 17 (17): 75-80, 2008

11 Lee, D. J., "3D precision coordinate measurement technology and trend" 11 (11): 7-14, 2002