알루미늄 첨가가 다공질 Self-Bonded SiC 세라믹스의 기공률과 꺾임강도에 미치는 영향 = Effect of Aluminum Addition on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics

다국어 초록 (Multilingual Abstract)

Porous self-bonded silicon carbide (SBSC) ceramics were fabricated at temperatures ranging from 1750 to $1850^{\circ}C$ using SiC, Si, C as starting materials and Al as an optional sintering additive. The effect of Al addition on the porosity and strength of the porous SBSC ceramics were investigated as functions of sintering temperature and Si:C ratio. The porosity increased with decreasing the Si:C ratio and increasing the sintering temperature. It was possible to fabricate SBSC ceramics with porosities ranging from 37% to 44% by adjusting the Si:C ratio and the sintering temperature. Addition of Al additive promoted densification and necking between SiC grains, resulting in improved strength. Typical flexural strengths of SBSC ceramics with and without Al addition were 44 MPa and 34MPa, respectively.

참고문헌 (Reference)

1 엄정혜, "탄소열환원공정을사용한다공질탄화규소세라믹스의저온제조공정" 한국세라믹학회 43 (43): 552-557, 2006

2 윤성호, "침윤된 Si 및 성형체내 Carbon Source의 양이 반응소결 탄화규소 다공체의 기공률 및 파괴강도에 미치는영향" 한국세라믹학회 44 (44): 381-386, 2007

3 황성식, "용융 Si 침윤방법에 의한 반응소결 탄화규소 고온가스 필터의 제조 및 특성" 한국세라믹학회 40 (40): 13-13, 2003

4 김신한, "부분소결공정에 의한 다공질 탄화규소 세라믹스의 제조 및 특성" 한국세라믹학회 41 (41): 9-9, 2004

5 S. Prochazka, "The Role of Boron and Carbon in the Sintering of Silicon Carbide In: Special Ceramic 6, in British Ceram. Res. Ass." 171-181, 1975

6 경재진, "SiC가 코팅된 그라파이트 Foam의 제조 및 특성 분석" 한국세라믹학회 44 (44): 622-626, 2007

7 V. Z. Stavric, "Rekristallisiertes Siliziumkarbid" 27 (27): 125-128, 1975

8 Y.-W. Kim, "Processing of Porous Silicon Carbide Ceramics from Carbon-Filled Polysiloxane by Extrusion and Carbothermal Reduction" 91 (91): 1361-1364, 2008

9 이성희, "Processing of Cellular SiC Ceramics Using Polymer Microbeads" 한국세라믹학회 43 (43): 458-462, 2006

10 J. H. Eom, "Processing and Properties of Polysiloxane-Derived Porous Silicon Carbide Ceramics Using Hollow Microspheres as Templates" 28 : 1029-1035, 2008

11 R. A. Alliegro, "Pressure Sintered Silicon Carbide" 39 : 386-389, 1956

12 J. H. Eom, "Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process" 464 : 129-134, 2007

13 X. Yao, "Low-Temperature Sintering of SiC Reticulated Porous Ceramics with MgO-Al2O3-SiO2 Additives as Sintering Aids" 42 : 4960-4966, 2007

14 N. Keller, "Influence of the Preparation Conditions on the Synthesis of High Surface Area SiC for Use as a HeterogeneousCatalyst Support" 34 : 3189-3202, 1999

15 K. S. Seo, "Fabrication of Porous RBSC by Si Melt Infiltration(in Korean)" 37 (37): 1119-1125, 2000

16 임광영, "Effect of Si:C Ratio on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics" 한국세라믹학회 45 (45): 285-289, 2008

17 임광영, "Effect of Carbon Source on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics" 한국세라믹학회 45 (45): 430-437, 2008

18 S. Prochazka, "Effect of Boron and Carbon on Sintering of SiC" 58 (58): 72-, 1975

19 S. Honda, "Compressive Deformation Behavior of Al-doped β-SiC at Elevated Temperature" 22 : 979-985, 2002