건축물 내장재의 분별해체와 일반해체에 관한 비교연구

다국어 초록 (Multilingual Abstract)

CW(Construction wastes) amount is increasing as building or structure construction industry is growing. So many countries make efforts to reduce and recycle CW. Some advanced countries are adopting SDM(separating dismantlement method) to reuse CW for economic advantage and we also need to make the system for SDM. This study is the comparative analysis on labor number, demolition time, the classes and the quantity of CW between UDM(usual demolition method) and SDM of the building interior for educational institute by field investigation. The results of research are as follows.
The amount of CW by UDM was increased to 55% and that by SDM was increased to 65% comparing with calculating amount by a drawing. The generation weight of CW per square meter is 29.78㎏/㎡ in the case of SDM and 17.07㎏/㎡ in the case of UDM. The demolition time is 7 hour and 58minutes and the 27.5 man?hour in the case of SDM and 3 hours and 5minutes and 11.24 man?hour in the case of UDM.
The total man?hour/generation weight of CW is 0.92 in the case of SDM, which is 1.4 times higher than 0.66 in the case of UDM This means SDM needs higher expense. But if the value of reuse and recycling CW is considered, involving landfill tax, SDM would be more economical than UDM.

목차 (Table of Contents)

• Abstract
• 1. 서론
• 2. 문헌고찰
• 3. 조사실험
• 4. 분석 및 고찰
• 5. 결론
• 참고문헌

참고문헌 (Reference)

1 이한민, "해체공사의 최적공법 선정을 위한 시스템 개발에 관한 연구" 대한건축학회 24 (24): 193-200, 2008

2 박용팔, "주택의 신축과 해체시 건설폐기물의 발생종류와 처리방법의 비교·분석에 관한 연구" 대한건축학회 20 (20): 201-208, 2004

3 정응혁, "주거용 건축물 해체 전？후의 건설폐기물 발생량 비교？분석을 통한 건설폐기물 발생 원단위 작성에 관한 연구" 대한건축학회 23 (23): 167-176, 2007

4 대한주택공사, "공동주택 철거잔재의 활용성 향상을 위한 해체기술 및 시스템 개발" 건설교통부 2004

5 한국건설기술연구원, "건설폐기물 분별해체 시스템 구축 및 적정공사비용 산정 연구" 환경부 2008

6 한국건설기술연구원, "건설부산물 재활용 방안연구" 건설교통부 203

7 社團法人建築業協會, "建築混合廢棄物の原單位調査報告書, 建築物の解體に伴づ廢棄物の原單位調査報告書" 2004

8 국립환경과학원, "2007 전국폐기물 발생 및 처리현황"