국내에서 토석류 해석을 위해 널리 사용되고 있는 FLO-2D를 포함하여 많은 토석류 모형들이 침식-퇴적과정을 모의하는 과정을 포함하지 않고 있어, 연행작용에 의하여 토석류의 양이 늘어나...

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=T15773029
춘천 : 강원대학교 대학원, 2021
학위논문(박사) -- 강원대학교 대학원 , 지역건설공학과 지역기반공학 , 2021. 2
2021
한국어
강원특별자치도
129 ; 26 cm
지도교수: 김용성
I804:42002-000000031995
0
상세조회0
다운로드국내에서 토석류 해석을 위해 널리 사용되고 있는 FLO-2D를 포함하여 많은 토석류 모형들이 침식-퇴적과정을 모의하는 과정을 포함하지 않고 있어, 연행작용에 의하여 토석류의 양이 늘어나...
국내에서 토석류 해석을 위해 널리 사용되고 있는 FLO-2D를 포함하여 많은 토석류 모형들이 침식-퇴적과정을 모의하는 과정을 포함하지 않고 있어, 연행작용에 의하여 토석류의 양이 늘어나는 과정을 모의하지 못하고 있다. 이러한 모형은 토석류 모의 시 생성항을 통해서 토석류가 지속적으로 생성되거나, 초기에 대량의 토석류가 발생하여 유하하도록 하는 등 토석류의 거동이 현실과는 다르게 모의됨으로서 부정확한 분석결과가 얻어지게 된다.
최근의 토석류 연구에서는 침식-퇴적 및 연행작용에 의한 효과를 반영한 수치모의 연구들이 있으나, 모형의 검증을 위한 침식-퇴적 거동에 대한 자료는 현재까지 매우 부족한 실정이다. 토석류 발생에 따른 침식-퇴적 거동특성은 그 자체로도 공학적으로 중요한 요소이며, 수치해석 모의에 필요한 매개변수 추정에도 필요한 항목이다. 토석류 모의의 검증자료로 활용될 수 있는 토석류에 대한 실험적 연구는 토석류의 확산 형태 및 확산 길이에 대한 내용이 대부분으로 흐름수로에서의 침식 및 퇴적에 대한 연구는 찾아보기 어려운 상태이다.
본 연구에서는 토석류 모형 침식-퇴적과정의 재현성 검증에 활용하기 위하여 실내모형실험을 수행하고, 토석류 발생에 따른 흐름부에서의 침식 및 퇴적에 대한 거동 특성을 분석하였다. 다양한 조건하에 실내실험을 수행하였으며, 토석류 해석 수치모형을 실내실험 재현모의에 적용하여 모형의 적용성을 검토하였다. 이후 실내실험 결과를 재현할 수 있도록 보정(Calibration)한 매개변수를 2011년에 발생한 우면산 산사태 모의에 적용하여 모형 및 매개변수의 적용성을 검토하였다.
상부 토조의 토사 함수비가 30~80% 실험에서는 퇴적 현상이 탁월하였고, 100% 이상인 실험에서는 침식 현상이 확연하게 나타나 토사의 함수비가 높아지면 집중호우 등 선행강우로 인한 산지 지역에서 발생되는 토석류 현상과 유사하고, 함수비가 낮으면 토석류(Debris flow)가 아닌 입상유동(Granular flow)으로 보는 것이 적절한 것으로 판단된다.
상부 토조의 함수비를 100% 이상으로 변화하여 침식이 발생한 실험에서 상부 토조의 액화된 토사는 빠른 속도로 흐름이 진행되면서 함수비와 붕괴 체적이 증가할수록 흐름수로 상류부에 침식이 크게 나타나고, 상류부의 토사를 중류부를 거쳐 하류부까지 연행(Entrainment)하는 것으로 판단된다.
물리적 기반 모델링이 적용된 국내에서 개발된 프로그램을 이용하여 토석류의 침식 및 퇴적 거동 특성에 대하여 수치모의를 수행한 결과, 실제 발생한 토석류 거동 특성과 유사한 양상으로 나타나 본 연구에서 제안한 매개변수는 유동 및 침식 모형에 적용 가능한 것으로 판단된다.
본 연구를 통해 토석류 흐름부에서의 침식 및 퇴적 특성분석을 통하여 토석류 재해발생 지역 예측 및 재해예방을 위한 연구에 활용함으로써, 국내 토석류 피해 위험 발생 예상 지역에 대한 대책 수립에 활용할 수 있을 것으로 판단된다.
다국어 초록 (Multilingual Abstract)
Many debris flow models, including FLO-2D, which is widely used for the analysis of debris flow in Korea, do not include simulation of the erosion-deposition process and increment of debris flow due to the entrainment effect has not been simulated. Th...
Many debris flow models, including FLO-2D, which is widely used for the analysis of debris flow in Korea, do not include simulation of the erosion-deposition process and increment of debris flow due to the entrainment effect has not been simulated. These models result in inaccurate analysis results because of simulating the behavior of debris flow that is different from reality, such as the continuous generation of debris flow through the source term during simulation, induction and generation of large quantity of debris flows beginning, etc.
Although recent numerical simulation studies reflecting the effects of erosion-deposition and entrainment effects do exist, data on erosion-deposition behavior for model verification are still limited. The behavioral characteristics of erosion-deposition due to debris flow are an essential engineering factor and are also necessary for estimating parameters needed for numerical analysis simulation. Experimental studies on debris flows that can be used as verification data for the simulation of debris flows are mostly about the diffusion pattern and the diffusion length. Thus, it is difficult to find studies on erosion and deposition in the flow channels.
In this study, laboratory model experiments were performed to verify the repeatability of the erosion-deposition process of the debris flow, and the behavioral characteristics of erosion-deposition in the flow channel were analyzed for the debris flow. Laboratory experiments were carried out under diverse conditions, and the applicability of the model was examined by applying the numerical model to the reproduced laboratory model. After that, the parameters that were calibrated to reproduce the laboratory experiment results were applied to the simulation of the landslide of Mt. Woomyeon in 2011, and the applicability of the model and parameters were reviewed.
The deposition phenomenon was apparent in the experiment where the water content of the upper soil is 30 - 80%, and the erosion phenomenon was evident in the experiment where water content is above 100%. If the water content of soil is high, debris flow phenomenon occurring in the mountainous areas due to preceding rainfall, such as concentrated torrential rain, is monitored, and if the water content is low, it is pertinent to granular flow, rather than debris flow.
In the experiment where erosion occurred by changing the water content of the upper soil to more than 100%, the flow of liquefied soil at the upper portion of the channel proceeded at high speed. With an increase in the water content and the collapse volume, increased erosion was monitored in the upstream portion of the flow channel, and it is considered that the soil is entrained from the midstream to the downstream.
The results of performing numerical simulations on the erosion-deposition behavior of debris flow using a program developed in Korea based on physical modeling manifest that the simulation results corroborate with the behavior of the actual debris flow and the parameters proposed in this study are considered to be applicable to the flow and erosion models.
The analysis of the erosion-deposition behavior in the flow channel obtained from this study can be used in the prediction of the debris flow prone areas and prevention of the disaster so that it can be used to establish countermeasures for the area debris flow prone regions.
목차 (Table of Contents)
로그인하고 관련된 다양한 학술자료를 확인해 보세요.
로그인