Local response of W-shaped steel columns under blast loading

다국어 초록 (Multilingual Abstract)

Local failure of a primary structural component induced by direct air-blast loading may be itself a critical damage and lead to the partial or full collapse of the building. As an extensive research to mitigate blast-induced hazards in steel frame structure, a state-of-art analytical approach or high-fidelity

computational nonlinear continuum modeling using computational fluid dynamics was described in this paper. The capability of the approach to produce reasonable blast pressures on a steel wide-flange section

column was first evaluated. Parametric studies were conducted to observe the effects of section sizes and boundary conditions on behavior and failure of columns in steel frame structures. This study shows that the analytical approach is reasonable and effective to understand the nature of blast wave and complex interaction between blast loading and steel column behavior.

참고문헌 (Reference)

1 "Structures to Resist the Effects of Accidental Explosions" Joint Departments of the Army, Air Force and Navy 1990

2 Cowper, G.R., "Strain Hardening and Strain Rate effect in the Impact Loading of Cantilever Beams" Brown University 1957

3 Shen, J.H.J., "Steel Tips: Use of Deep Columns in Special Steel Moment Frames" American Institute of Steel Construction 2002

4 Mullin, M.J., "Simulation of energy absorbing meterials in blast loaded structures" 2004

5 AISC, "Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction" 2006

6 FEMA-426, "Reference Manual to Mitigate Potential Terrorist Attacks Against Buildings" Federal Emergency Management Agency 2003

7 Beshara, F.B.A., "Modelling of blast loading on aboveground structures - I. General phenomenology and external blast" 51 (51): 585-596, 1994

8 AISC, "Manual of Steel Construction: Load and Resistance Factor Design, 3rd edtition" American Institute of Steel Construction 2001

9 Ls-Dyna, "LS-DYNA Theoretical Manual" Livermore Software Technology Corporation 1998

10 Ls-Dyna, "LS-DYNA Keyword User’s Manual, version 970" Livermore Software Technology Corporation 2005

11 Dobratz, B.M., "LLNL Handbook of Explosives" Lawrence Livermore National Laboratory 1985

12 Lee, E., "JWL Equation of State Coefficients for High Explosives" University of California, Lawrence Livermore National Laboratory 1973

13 "Fundamentals of Protective Design for Conventional Weapons" U.S. Department of the Army 1990

14 Zhong, Z.H., "Finite Element Procedures for Contact-impact Problems" Oxford University Press 1993

15 Marchand, K.A., "Facts for Steel Buildings: Blast and Progressive Collapse" American Institute of Steel Construction 2005

16 Kinney, G.F., "Explosive Shocks in Air, 2nd edition" Springer Verlag 1985

17 Baker, W.E., "Explosions in Air" University of Texas Press 1973

18 Baker, W.E., "Explosion Hazards and Evaluation" Elsevier 1983

19 Hamburger, R.O. and Whittaker, A.S., "Design of steel structures for blast-related progressive collapse resistance" American Society of Civil Engineers

20 Kang, K.W., "Blast response of steel-concrete composite structures, international colloquium on stability and ductility of steel structures" 861-868, 2006

21 Luccioni, B., "Blast load assessment using hydrocodes" 28 : 1736-1744, 2006

22 Applied Research Associates (ARA), Inc., "AtBlast program"

23 Randers-Pehrson, G., "Airblast Loading Model for DYNA2D and DYNA3D" 1997

24 Lee, E.L., "Adiabatic Expansion of High Explosive Detonation Products" University of California, Lawrence Livermore National Laboratory 1968

25 Souli, M., "ALE formulation for fluid-structure interaction problems" 190 (190): 659-675, 2000

26 Flanagan, D.P., "A uniform strain hexahedron and quadrilateral and orthogonal hourglass control" 17 : 679-706, 1981