사질토 지반에 설치된 버킷기초 및 얕은기초의 수직지지력 산정

국문 초록 (Abstract)

사질토 지반에 설치된 버킷기초의 수직지지력은 주면마찰력과 선단지지력의 합으로 산정할 수 있다. 하지만 수직하중 작용 시 나타나는 주면마찰력 감소와 선단지지력 증가의 특징을 정확하게 고려할 수 있는 설계식이 없으며, 실제와 같은 사질토 지반의 비관련흐름 특성이 반영되어야 한다. 본 연구에서는 2차원 축대칭 유한요소해석으로 사질토 지반에 설치된 원형 버킷기초의 수직지지력을 다양한 지반 마찰각과 기초 크기에 대하여 산정하였다. 해석 결과의 극한지지력을 주면마찰력과 선단지지력으로 분리하여 특징을 분석한 후 각각의 설계식을 도출하였다. 버킷기초의 주면마찰력은 선단지지력에 비해 크기가 매우 작고 말뚝 설계식과 차이가 근소하므로 이를 동일하게 사용하였다. 주면마찰력의 영향으로 얕은기초의 지지력보다 증가하는 버킷기초의 선단지지력은 기존의 설계식을 수정하여 적용할 수 있도록 해석 결과를 토대로 새로운 형상-깊이계수(sq · dq )를 제안하였다. 또한 관련흐름법칙을 적용하여 제안된 기존의 얕은기초 형상계수와 깊이계수는 실제 사질토 지반에서의 지지력을 과대예측하므로 비관련흐름 특성을 반영한 형상-깊이계수를 사용하여 지지력을 예측해야 한다.

다국어 초록 (Multilingual Abstract)

The vertical bearing capacity of a bucket foundation installed in sand can be calculated as sum of the skin friction and end bearing capacity. However, the current design equations are not considering the non-associated flow characteristics of sand and the reduction in the skin friction and increase in the end bearing capacity when the vertical load is applied. In this study, we perform two-dimensional axisymmetric finite element analyses following non-associated flow rule and calculate the vertical bearing capacity of circular bucket foundation of various sizes installed in sand of different friction angles. After calculating the skin friction and end bearing force at the ultimate state, design equations are derived for each. The skin friction of bucket foundation is shown significantly small compared to the end bearing capacity. Considering the difference with the available design equation for piles, it is recommended that the equation for piles is used for the bucket foundation. A new shape-depth factor (sq?dq) for bucket foundation is recommended which also accounts for the increment of the end bearing capacity due to skin friction. Additionally, the shape and depth factor of embedded foundation proposed from the associated flow rule can overestimate the bearing capacity in sand, so it is more adequate to use the shape-depth factor proposed in this study.

목차 (Table of Contents)

• ABSTRACT
• 요지
• 1. 서론
• 2. 이론적 배경
• 3. 수치해석 모델 및 입력 물성
• 4. 해석 결과 및 분석
• 5. 결론 및 고찰
• References

참고문헌 (Reference)

1 박정선, "사질토 지반에 설치된 버킷기초의 수직 하중전이 특성" 한국지반공학회 31 (31): 29-39, 2015

2 김동준, "모래지반에서 팽창각에 따른 연속기초와 원형기초의 지지력계수 Nγ와 형상계수에 대한 수치해석 연구" 한국지반공학회 30 (30): 49-63, 2014

3 Prandtl, L., "Über die härte plastischer körper, Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen" 1920 : 74-85, 1920

4 Reissner, H., "Zum erddruckproblem" 295-311, 1924

5 Bang, S., "Ultimate vertical loading capacity of suction piles" 703-712, 2001

6 Bang, S., "Ultimate horizontal loading capacity of suction piles" 12 (12): 56-63, 2002

7 Lyamin, A. V., "Two-and three-dimensional bearing capacity of footings in sand" 57 (57): 647-662, 2007

8 Terzaghi, K., "Theoretical soil mechanics" Wiley 1-510, 1943

9 Yun, G., "The undrained vertical bearing capacity of skirted foundations" 47 (47): 493-505, 2007

10 Bransby, M. F., "The undrained capacity of skirted strip foundations under combined loading" 59 (59): 115-125, 2009

11 Salgado, R., "The engineering of foundations" McGraw Hill 1-882, 2008

12 Bransby, F., "The effect of embedment depth on the undrained response of skirted foundations to combined loading" 39 (39): 19-33, 1999

13 Caquot, A., "Sur le terme de surface dans le calcul des fondations en milieu pulverulent" 336-337, 1953

14 Tjelta, T. I., "Suction piles: their position and applications today" 17-22, 2001

15 Houlsby, G. T., "Suction caissons for wind turbines" 75-93, 2005

16 Meyerhof, G. G., "Some recent research on the bearing capacity of foundations" 1 (1): 16-26, 1963

17 Brinkgreve, R. B. J., "Plaxis: finite element code for soil and rock analyses: version 7"

18 Frydman, S., "Numerical studies of bearing-capacity factor N γ" 123 (123): 20-29, 1997

19 Benmebarek, S., "Numerical evaluation of the bearing capacity factor Nγ of ring footings" 44 : 132-138, 2012

20 Achmus, M., "Load-bearing behavior of suction bucket foundations in sand" 43 : 157-165, 2013

21 House, A., "Limiting aspect ratio for suction caisson installation in clay" 30 : 676-683, 1999

22 Byrne, B. W., "Investigating the response of offshore foundations in soft clay soils" American Society of Mechanical Engineers 263-275, 2002

23 House, A. R., "Installation and pull-out capacity of stiffened suction caissons in cohesive sediments" 2 : 574-580, 2001

24 Cho, Y., "Inclined loading capacity of suction piles" 827-832, 2002

25 Vesic, A. S., "Foundation Engineering Handbook" 121-147, 1975

26 Itasca, "FLAC, Fast lagrangian analysis of continua"

27 Martin, C. M., "Exact bearing capacity calculations using the method of characteristics" 441-450, 2005

28 Hung, L. C., "Evaluation of vertical and horizontal bearing capacities of bucket foundations in clay" 52 : 75-82, 2012

29 Hung, L. C., "Evaluation of undrained bearing capacities of bucket foundations under combined loads" 32 (32): 76-92, 2014

30 Gourvenec, S., "Effect of embedment on the undrained capacity of shallow foundations under general loading" 58 (58): 177-185, 2008

31 Loukidis, D., "Bearing capacity of strip and circular footings in sand using finite elements" 36 (36): 871-879, 2009

32 Erickson, H. L., "Bearing capacity of circular footings" 128 (128): 38-43, 2002

33 Eid, H. T., "Bearing capacity and settlement of skirted shallow foundations on sand" 13 (13): 645-652, 2013

34 Vesic, A. S., "Analysis of ultimate loads of shallow foundations" 99 (99): 54-73, 1973

35 Simulia, "Abaqus user’s manual" Dassault Systèmes Simulia Corp. 1-773, 2010

36 Hansen, J. B., "A revised and extended formula for bearing capacity, Akademiet for de Tekniske Videnskaber" 28 : 5-11, 1970