Mechanical behaviour of materials-IV : proceedings of the fourth international conference, Stockholm, Sweden, 15-19 August 1983

목차 (Table of Contents)

• [Volume. 1]----------
• CONTENTS
• CONTENTS OF VOLUME 2 = xiii
• PREFACE = xxi
• INVITED PAPERS
• Materials aspects of crack tip yielding and subcritical crack growth in engineering alloys / J. Lankford = 3
• Modern manufacturing and performance concepts of composite materials(abstract only) / G. Lubin = 31
• Comparison between experimental and theoretical forming limit diagrams / A. Melander = 33
• Limits to formability in rate-sensitive metal sheets / A. Needleman ; V. Tvergaard = 51
• Constrained grain boundary cavitation in a creeping body containing a macroscopic crack / H. Riedel = 67
• High temperature deformation and failure of welded joints / J. A. Williams = 79
• Simplified design procedures for composite materials / S. W. Tsai = 103
• Mechanical properties of structural materials at low temperatures with reference to the type of stressed state and mode of loading / G. S. Pisarenko ; A. A. Lebedev ; V. A. Strizhalo = 115
• Factors affecting plastic instability and sheet formability / S. S. Hecker = 129
• THEME Ⅰ High Temperature Deformation and Failure
• Constitutive laws of 316 stainless steel in high temperature creep by biaxial experiments / P. Delobelle ; C. Oytana ; A. Mermet = 141
• Constitutive relationships for creep-fatigue in high-temperature materials / A. Berkovits ; S. Nadiv = 149
• High temperature low cycle fatigue of two austenitic stainless steels - a comparison between mechanical properties and microstructure / J-O. Nilsson = 157
• Creep modeling of textured zircaloy under biaxial stressing / B. L. Adams : K. L. Murty = 165
• Thermal fatigue test by direct passage method of large electric current on stainless steels / K. Kamachi ; N. Tani ; T. Ishida ; M. Kawano ; T. Kuhohori = 175
• The predictive capability of three high temperature low cycle fatigue models in the alloy IN-738 / M. Y. Nazmy ; C. W$$\ddot u$$thrich = 183
• Reheat cracking during stress relief annealing - a numerical approach / L. Josefson = 191
• Influence of prestress on the yield surface of the cast nickel superalloy Mar-MOO2 at elevated temperature / M. R. Winstone = 199
• Fatigue crack propagation in stainless steel subjected to repeated thermal shock / M. Shimizu ; M. W. Brown ; K. J. Miller = 207
• A study of creep behavior of welded joint / K. Satoh ; M. Toyoda = 215
• Effect of cyclic strain on cumulative fatigue damage of type 304 stainless steel at high temperature / H. L. Nguyen ; T. Bui-Quoc = 223
• The effects of the wavy grain boundaries on the creep fracture behavior in UDIMET-700 alloy / G. Guo ; H. Shen ; Q. Cai = 231
• The non-isothermal fatigue tests and analysis / K. Bohatec ; C. Budac ; J. Zdarek = 239
• Thermal fatigue behaviour of Mar-M509 superalloy / F. Rezai-Aria ; L. R$$e'$$my ; C. Herman ; B. Dambrine = 247
• Thermal fatigue of a thermally unstable alloy / G. Cailletaud ; J. P. Culi$$e'$$ ; H. Kaczmarek = 255
• Oxide wedging effects on near threshold fatigue crack growth at elevated temperature(abstract only) / R. Yuuki ; H. Kitagawa ; Y. Miki = 263
• Creep in welded joints in ferritic and martensitic steels / B. Ivarsson = 265
• Thermal stresses, plate motion and hot cracking in butt-welding / M. Jonsson ; L. Karlsson ; L-E. Lindgren = 273
• Relative importance of initiation and propagation phases on the high temperature low cycle fatigue behaviour of a nickel superalloy / V. T. A. Antunes = 281
• Influence of state of stress on creep failure of 2¼% Cr 1 % Mo steel / K. D. Al-Faddagh ; G. A. Webster ; B. F. Dyson = 289
• The use of fracture mechanics approach to evaluate the reliability of a nozzle weld assembly in power plant vessels(abstract only) / I. V. Gorynin ; V. A. Ignatov ; B. T. Timofeyev = 297
• The effect of ordering on the high temperature deformation of nickel based alloys / A. Marucco ; B. Nath = 299
• Influence of grain orientations on the mechanical properties and fracture characteristics in a directionally solidified superalloy / M. Yan ; G. Zhang ; H. Ni = 307
• Influence of cyclic loading on crack growth of a ½% Cr ½% Mo ¼% V steel / D. J. Smith ; G. A. Webster = 315
• Damage mechanics applied to high temperature fatigue / A. Plumtree ; J. Lemaitre = 323
• Generalization of Mindlin's kinematical plate theory for anisotropic materials / E. E. El-Soaly = 331
• Experimental creep mechanism maps for metals / G. Malakondaiah ; P. Rama Rao = 337
• The influence of multiaxiality of stress and environmental induced degradation on the creep behaviour of alloy 800H tubular components / R. C. Hurst = 345
• THEME Ⅱ Mechanical Properties of Surface Coated Materials
• On the contact fatigue resistance of the cobalt alloy coating and its micromechanisms / F. Wang ; C. Tsi ; Y. Chang = 355
• Tribological characteristics of steel 2OCr2Ni4 after complex thermochemical treatment / T. C. Gao ; T. C. Lei = 363
• Synthesis and testing of foam-filled FRP shell for static crushing and impact / K. A. Jacob ; J. Jayaraman = 369
• Fretting in electrical contacts / M. Braunovi$$c'$$ = 377
• Comparing the abrasive and erosive resistance of some flame sprayed coatings and nitrided steel surfaces / U. Bryggman ; S. Hogmark = 385
• The surface layer fatigue failure of heat-resisting steels at high temperature and the protective effect of alloy coatings / Z. Wu ; B. Wang ; D. Jin ; M. Xie ; X. Liu ; S. Lu = 393
• Creep properties of electron beam evaporated Ni-Al₂O₃ condensates(abstract only) / B. E. Jacobson = 399
• Diffusion barriers used to improve structural stability and mechanical properties of W fibre-Ni matrix composites at elevated temperatures / R. Ahlroth ; P. Kettunen = 401
• Mechanical properties of plasma sprayed and post-treated FeCrAlY-coatings / C. Burman ; T. Ericsson = 409
• The cavitation erosion of coated and surface treated steels / A. Barletta ; A. Ball = 421
• THEME Ⅲ Design with Fibre Reinforced(Composite) Materials
• A correlation between fracture energy and fracture morphology in mixed-mode fracture of composites / H. T. Hahn ; T. Johannesson = 431
• Optimum design of laminated plates with fibre reinforced(composite) materials(abstract only) / Y. Jiang ; Y. -C. Chiang = 439
• Mechanical properties of bamboo-mesh reinforced cement composites / M. A. Mansur ; M. A. Aziz = 443
• The influence of microstructure on composite strengthening / R. J. Arsenault ; R. M. Fisher = 451
• Microstress redistribution in fibre-reinforced composites due to time-dependent processes / V. Kafka = 457
• Material design of fibrous laminated composites with required flexural stiffness / M. Miki = 465
• Influence of matrix resin on ultimate strength of unidirectional CFRP / Y. Miyano ; M. Kanemitsu ; T. Kunio ; M. Miki = 473
• Effect of fiber orientation on stable crack growth in FRP / T. Kunio ; M. Shimizu ; S. Sohmiya = 481
• Nondestructive evaluation of composite materials - a design philosophy / J. C. Duke, Jr. ; E. G. Henneke, Ⅱ ; W. W. Stinchcomb ; K. L. Reifsnider = 489
• Creep behaviour of reinforced and non-reinforced resins / M. W. Darlington ; A. T. Marques = 497
• Interfacial failure in steel fiber reinforced polystyrene impregnated mortar / T. Ert$$\ddot u$$ ; M. Tokyay = 507
• The effect of extreme temperatures on the elastic properties and fracture behavior of graphite/polyimide composites / D. H. Morris ; R. A. Simonds = 517
• Deformation and failure of thin-walled filament wound GRP tubes subjected to transverse indentation / M. G. Bader ; R. P. Harrison ; M. J. Hinton = 525
• Reliability-based fatigue-proof design of composite materials(extended abstract only) / H. Ishikawa ; A. Tsurui ; T. Tanimoto ; H. Kimura = 533
• Residual strength degradation model for glass／polyester laminates under repeated tension and compression loadings / T. Tanimoto ; H. Ishikawa ; S. Amijima ; H. Kimura = 539
• On the use of the three point bend and compact tension specimens to measure fracture toughness of composite laminates / C. E. Harris ; D. H. Morris = 549
• Acoustic emission from filament wound pipes under long-term loading conditions / L. Golaski ; D. Hull ; M. Kumosa = 557
• A study on interlaminar shear strength of composites / S. Zhang = 565
• Toughness of thin slabs under flexural or impact loading / N. I. Fattuhi = 573
• Measurement of interfacial shear strength in graphite fiber／aluminum matrix composites / V. Provenzano ; R. J. Weimer ; S. C. Sanday = 581
• Mechanical behavior of a short fiber composite / G. Tolf = 587
• Delamination and transverse fracture in graphite／epoxy materials / W. L. Bradley ; R. N. Cohen = 595
• [Volume. 2]----------
• CONTENTS
• CONTENTS OF VOLUME 1 = xiii
• THEME Ⅳ Sheet Forming of High-strength Materials
• Computer-aided prediction of sheet metal manufacturing processes and its experimental verification / D. Lee ; P. A. Stine = 605
• On the law of strength of dual-phase plain carbon steels as natural composite materials / T. C. Lei ; G. K. Liu = 611
• Material inhomogeneity and surface roughening during plastic deformation / T. Abe ; S. Nagaki = 619
• The influence of microstructure and texture on the forming properties of a dual phase Al-killed steel(abstract only) / C. S. da Costa Viana ; L. P. Medonca Brandao = 627
• Localized flow(shear bands) in Al and Al-3% Mg alloy(abstract only) / Y. Nakayama ; K. Morii = 629
• Instability in plastic bending of thin sheet metal / J. L. Duncan ; M. Sue-Chu ; X. J. Wang = 631
• Test methods for formability of hot rolled steel sheets / M. Lindberg ; L. Melin = 641
• Analysis of plastic instability in sheet-metal forming / G. Ferron ; M. Mliha-Touati = 649
• The effect of non-linear strain paths on the plastic properties of steels(abstract only) / T. Davis ; W. B. Hutchinson = 657
• Forming limits of titanium sheets / S. Kohara ; M. Katsuta ; K. Aoki = 659
• Effect of matrix and second phase on the maximum uniform strain of metals / M. Huang ; J. Luo ; B. He = 665
• Some problems about strain hardening exponent of metals / M.Huang ; J.Luo ; B. He = 673
• On the prediction of forming limit diagrams for anisotropic sheets / K. W. Neale ; E. Chater = 681
• A materials model for strain softening with appliations in modeling strain localization / T. C. Lowe ; A. K. Miller = 687
• Relationship between structure and mechanical behaviour of Al-10wt% Cu alloys produced by rheocasting / N. A. El-Mahallawy ; N. Fat-Holla ; M. A. Taha = 695
• THEME Ⅴ Material Aspects of Fracture Mechanics in Engineering Practice
• Direct observations of the micromechanisms of fracture in Polymeric solids using the scanning electron microscope / D. G. Gilbert ; P. W. R. Beaumont ; W. C. Nixon = 705
• Fatigue crack propagation in viscous environments / J. L. Tzou ; S. Suresh ; R. O. Ritchie = 711
• An investigation of void distribution in necking region and tensile fracture characteristics of dual-phase steel 1010 / B. D. Hong ; T. C. Lei = 719
• Fracture toughness and X-ray diffraction observation of fracture surface of ductile cast iron / Z. Yajima ; Y. Hirose ; K. Tanaka = 725
• Stree and strain fields around inclusions in a plastically deforming matrix / R. D. Thomson ; J. W. Hancock = 733
• The use of J-resistance curves to characterize the effects of microstructure, strength and irradiation of fracture micromechanisms in nuclear reactor pressure tubes / L. A. Simpson = 739
• Standard method of test for elastic-plastic fracture toughness $$J_{IC}$$ recommended in Japan / H. Miyamoto ; H. Kobayashi ; N. Ohtsuka = 747
• Effect of crack closure on near-threshold crack growth behaviour in a high strength Al-alloy up to ultrasonic frequencies / A. F. Blom ; A. Hadrboletz ; B. Weiss = 755
• Creep crack initiation and growth in an austenitic stainless steel / E. Maas ; A. Pineau = 763
• Flaws, fracture mechanisms and Hertzian cracks in brittle solids / I. Finnie ; D. Dolev = 771
• On the Weibull model of cleavage fracture / D. Qu ; X. W. Wang ; C. K. Tasi = 779
• The assessment of the fracture toughness of Fe-Ni-C alloys with austenitic and austenite-martensite structures / N. J. Hurd ; R. Brook = 787
• Fatigue crack growth retardation in an ultra high carbon steel / H. Toyoda ; M. Saito ; S. Ohta = 795
• Stretch zone, ductility and toughness studies in the transition region of 1045 steel / M. R. Bayoumi ; M. N. Bassim = 803
• Study on fracture process of nitrided cases of steel 30CrMo with acoustic emission technique / S. Zhang ; Q. He ; S. Song ; W. Hung ; Y. Deng ; Y. Zeng = 811
• Finite element analysis of fatigue crack closure in compact specimen / H. Nakamura ; H. Kobayashi ; S. Yanase ; H. Nakazawa = 817
• The effect of intermittent rest periods at elevated temperatures on the fatigue properties of 4140 steel / S. H. Kim = 825
• Failure predictions based on tearing instability and limit load - a parameter study / L. Hodulak = 833
• Fatigue crack propagation and threshold of type 304 L austenitic stainless steel / N. E. Atanasiu ; B. R. Irimescu = 841
• The effects of the size of the second phase particles on the.mechanical properties of a low alloy steel / Y. Hong ; Y. Yeh ; X. Xia = 849
• Fracture toughness of cast iron / J. Pirs = 857
• Fracture toughness of tungsten-free TiC-and(Ti) C, N-base hard alloys and its relation to the microstructure / M. Loshak ; N. Konovalenko ; T. Shapoval ; M. Dudkin = 865
• Experimental determination of hole initiation criteria at inclusions in low alloy steel and spheroidal graphite cast iron / S. K. Hur ; S. Y. Qing ; D. Fracois = 873
• A computer simulation of ductile behaviour in two steels of medium and low strength / I. C. Howard ; G. C. Li = 881
• A critical assessment of the threshold stress intensity factor / B. Cina = 887
• A comparison of $$J_{IC}$$, stretched zone size and crack opening displacement in a ferrific steel / V. Provenzano ; C. M. Gilmore ; F. A. Smidt ; J. R. Hawthorne = 895
• Assessment of ductile fracture resistance based on an engineering approach / V. Kumar ; M. D. German ; D. F. Mowbray = 903
• Fatigue crack growth at high strain amplitudes / C. W$$\ddot u$$thrich ; W. Hoffelner = 911
• Comparative study of crack resistance properties of three differently alloyed HSLA steels / A. Radovi$$c'$$ ; S. Sedmak ; Lj. Nedeljkovi$$c'$$ = 919
• New approaches in fracture mechanics / K. B. Broberg = 927
• On crack problems related to welding residual stress fields in linear elastic fracture mechanics / X. R. Wu ; J. Carlsson = 935
• A distributed damage approach to combined bending and axial loading of rock beams / F. Ouchterlony = 943
• Three methods for determining the J-R curve directly from a load displacement record / S. Kaiser = 951
• An elastic-plastic analysis of relationships between $$K_I$$, J, and CTOD / S. Pilcer ; N. G. Ohison = 959
• Stress hold time, stress rate and frequency effects on fracture under environment and under high temperature creep, fatigue and creep-fatigue interaction conditions / T. Yokobori ; A. T. Yokobori Jr. ; N. Takasu = 967
• Creep, fatigue and environment interactions in low alloy steels / A. Narumoto = 983
• Phenomenon and applications of the recovery-induced thermal deformation of thermoplastics / T. Machida ; T. Okai ; F. Hamayoshi = 991
• Thermal fatigue of structural materials with regard to structural stresses / Y. F. Balandin ; A. F. Malyguin ; Y. V. Yankovsky = 999
• High-temperature behaviour of steels with phase transformation and the simulation of quenching and welding processes / T. Inoue ; Z. G. Wang = 1005
• Production and mechanical property of clad-metals laminated with particle reinforced composite metal and ceramic powder /M. Kiuchi ; S. Sugiyama = 1013
• Fracture behaviour of pressure vessel shells plated with anticorrosive cladding / V. A. Ignatov ; B. T. Timofeyev ; V. A. Fedorova = 1023
• Delayed failure of inelastic composites / J. V. Suvorova = 1033
• Finite element analysis of thermal residual stresses in antisymmetrically laminated composites / T. Hirai ; A. Inoue ; T. Semba ; M. Hirai = 1039
• A three-dimensional ductile damage model applied to deep-drawing forming limits / J. Lemaitre = 1047
• On the law of mixture in dual phase steels / M. T. Ma ; D. G. Wang ; B. R. Wu = 1055
• Thermoactivation analysis of fatigue crack growth of aluminium alloys / V. S. Ivanova ; L. I. Maslov ; S. A. Kunavin ; T. Yokobori = 1063
• Tensile behavior and fracture characteristics of a dual-phase Fe／Mn／C steel / D-Z. Wang = 1069
• Application of the J-integrai concept to microscopic fracture mechanics / M. Kikuchi ; H. Miyamoto = 1077
• Quasi-static and impact fracture toughness of 5140 H steel after different thermal treatments / J. R. Klepaczko ; A. Solecki = 1085
• The influence of microstructure and temperature on static and dynamic fracture initiation in heat resistant steel / Z. Bil$$e'$$k ; J. Buchar ; M. Holzmann = 1095
• Effect of sulfur content on fracture behaviour of Ni-Cr-Mo-V steel / Y. Tanaka ; T. lwadate = 1101
• Micromechanics of fracture in microalloyed steel / A. N. Kumar ; R. K. Pandey = 1109
• An interpretation of scatter and thickness effect of fracture toughness in the transition region / N. Ohtsuka = 1117
• The determination of S-N curves with pre-cracked specimens / J. T. Wang = 1125
• Influence of creep voids growth on motion of a macro-crack / A. Neimitz = 1131
• Mechanical properties of surface coated materials / A. S. Argon = 1139
• Press forming problems of HSLA steel sheets / K. Miyauchi = 1159
• Mechanical behavior of energetic polymeric materials / S. Nicolaides ; D. Wiegand ; J. Pinto = 1177
• Anelastic creep behaviour of RR-58 aluminium alloy at 180˚C / L. O. Bueno = 1187
• Behaviour of materials at high temperatures / D. R. Hayhurst ; F. A. Leckie = 1195
• Reliability-based fatigue-proof design of composite materials / H. Ishikawa ; A. Tsurui ; T. Tanimoto ; H. Kimura = 1213
• Mechanical properties of magnetic composites / R. K. T. Hsieh = 1221
• The effect of non-linear strain paths on the plastic properties of steels / W. B. Hutchinson ; T. Davis = 1227
• Relationship between microstructure and hydrogen embrittlement in fracture mechanics aspect / J. Roma$$n'$$ski = 1235
• Author Index = 1241
• Subject Index = 1245