CNC 선반용 4축 전용로봇의 모델링 및 시뮬레이션

다국어 초록 (Multilingual Abstract)

This paper describes the modeling and simulation of a four-axis dedicated robot that can attach and detach a workpiece on a computer numerical control (CNC) lathe. The robot was modeled as a Scarab robot for compatibility with CNC lathes. The advantages of such a robot are that an actuator with a small capacity can be used for the robot and the degrees of freedom of the robot can be reduced to four. For the simulation of the four-axis dedicated robot, a regular kinematic equation and an inverse kinematic equation were derived. Simulations were performed with these equations from the position of the loading device to the chuck position of the lathe before machining and from the chuck of the lathe to the position of the loading device after machining. The simulation results showed that the four-axis dedicated robot could be operated accurately, and they provided the joint angle of each motor (θ₁, θ₂, and θ₃).

목차 (Table of Contents)

• ABSTRACT
• 1. 서론
• 2. 4축 전용 로봇의 모델링 및 시뮬레이션
• 3. 결론
• REFERENCES

참고문헌 (Reference)

1 Pan, Z., "Recent Progress on Programming Methods of Industrial Robots" 28 (28): 87-94, 2012

2 Ratcliffe, J. D., "Norm-Optimal Iterative Learning Control Applied to Gantry Robots for Automation Applications" 22 (22): 1303-1307, 2006

3 Shirinzadeh, B., "Laser Interferometry-Based Guidance Methodology for High Precision Positioning of Mechanisms and Robots" 26 (26): 74-82, 2010

4 Zhang, Ji., "Error Analysis and Compensation Method Of 6-axis Industrial Robot" 6 (6): 1383-1381, 2013

5 Wu, K., "Dynamic performance of industrial robot in corner path with CNC controller" 54 : 156-161, 2018

6 Gu, J. S., "Development and implementation of a real-time open-architecture control system for industrial robot systems" 17 (17): 469-483, 2004

7 Baicu, D. H., "Backstepping Boundary Control of Flexible-Link Electrically Driven Gantry Robots" 3 (3): 60-66, 1998

8 Baicu, C. F., "Active boundary control of a flexible single link gantry robot" A : 103-108, 1996

9 Sahu, S., "A Vibration Analysis of a 6 Axis Industrial Robot Using FEA" 4 (4): 2403-2410, 2017

10 Watanabe, A., "A Kinematic Calibration Method for Industrial Robots using Autonomous Visual Measurement" 55 (55): 1-6, 2006