Insulated, Passivated and Adhesively-Promoted Bonding Wire using Al2O3 Nano Coating

다국어 초록 (Multilingual Abstract)

Bonding wires are composed of conductive metals of Au, Ag & Cu with excellent electrical conductivities for transmitting power and signals to wafer chips. Wire metals do not provide electrical insulation, adhesion promoter and corrosion passivation. Adhesion between metal wires is extremely weak, which is responsible for wire cut failures during thermal cycling. Organic coating for electrical insulation does not satisfy bondability and manufacturability, and it is complex to apply very thin organic coating on metal wires. Automotive packages require enhanced reliability of packages under harsh conditions. LED and power packages are susceptible to wire cut failures. Contrary to conventional OCB behaviors, forming gas was not required for free air ball formation for both Ag and Pd-coated Cu wires with Al2O3 passivation.

참고문헌 (Reference)

1 S. Park, "Underfill acceleration factor based on thermal fatigue crack growth rate" 5490925-, 2010

2 S.-H. K. Park, "Ultrathin film encapsulation of an OLED by ALD" 8 (8): H21-, 2005

3 강혜준 ; 정재필, "TLP and Wire Bonding for Power Module" 26 (26): 7-13, 2019

4 C. Q. Cui, "Surface treatment of copper for the adhesion improvement to epoxy mold compounds" 678863-, 1998

5 김병우 ; 고혜리 ; 천경영 ; 고용호 ; 손윤철, "Study on Sn-Ag-Fe Transient Liquid Phase Bonding for Application to Electric Vehicles Power Modules" 30 (30): 61-68, 2023

6 이기업 ; 노호균 ; 김형구 ; 하준석, "Review on Oxidation Resistance Technology for Copper Nanowire Transparent Electrodes" 30 (30): 21-32, 2023

7 Z. W. Zhong, "Overview of wire bonding using copper wire or insulated wire" 51 (51): 4-12, 2011

8 H. G. Kim, "Microstructural evaluation of interfacial intermetallic compounds in Cu wire bonding with Al and Au pads" 64 : 356-366, 2014

9 P. Korzhavyi, "Literature review on the properties of cuprous oxide Cu2O and the process of copper oxidation" 2011

10 N. Badwe, "Interfacial fracture strength and toughness of copper/epoxy-resin interfaces" 103 : 512-518, 2016

11 A. G. Evans, "Interface adhesion: effects of plasticity and segregation" 47 (47): 4093-4113, 1999

12 M. D. Groner, "Gas Diffusion barriers on polymers using Al2O3 atomic layer deposition" 88 : 051907-, 2006

13 J. Liu, "Fracture behavior of an epoxy/aluminum interface reinforced by sol-gel coatings" 20 (20): 277-305, 2006

14 C. Chen, "Evaluation of Corrosion Resistance of Ag-Alloy Bonding Wires for Electronic Packaging" 8 (8): 146-153, 2017

15 M. A. Hoque, "Effects of humidity and phosphor on silicone/phosphor composite in white light-emitting diode package" 30 : 20471-20478, 2019

16 W. Fu-liang, "Dynamics of Free Air Ball Formation in Thermosonic Wire Bonding" 2 (2): 1389-1393, 2012

17 S. Park, "Crack growth rate of thermally induced underfill fatigue" 5074170-, 2009

18 H. Xu, "Behavior of aluminum oxide, intermetallics and voids in Cu-Al wire bonds" 59 (59): 5661-5673, 2011

19 S. Park, "Au-Less, Ni-Less & Roughness-Less PCB Cu Surface Treatment Using All-in-One Al2O3 Passivation" 00111-, 2021

20 S. Park, "A Nonlinear Viscoelastic Fracture Analysis of Concrete/FRP Delamination in Aggressive Environments" 142 : 9-27, 2006