1 Uematsu, Y., "Wind-induced dynamic response and resultant load estimation of a circular flat roof" 83 : 251-261, 1999
2 Taylor, T. J., "Wind pressures on a hemispherical dome" 40 : 199-213, 1991
3 Kitagawa, T., "Wind pressures measurement on end-cell-induced vibration of a cantilevered circular cylinder" 90 : 395-405, 2002
4 Portela, G., "Wind pressures and buckling of cylindrical steel tanks with a dome roof" 61 : 808-824, 2005
5 Portela, G., "Wind pressures and buckling of cylindrical steel tanks with a conical roof" 61 : 786-807, 2005
6 Yunjie Wang, "Wind pressure characteristics of a low-rise building with various openings on a roof corner" 한국풍공학회 21 (21): 1-23, 2015
7 Maher, F. J., "Wind loads on dome-cylinders and dome-cone shapes" 91 (91): 79-96, 1966
8 Blackmore, P. A., "Wind loads on cylindrical roofs"
9 Macdonald, P.A., "Wind loads on circular storage bins, silos and tanks: Point pressure measurements" School of Civil and Mining Engineering University of Sydney 1988
10 Li, Y. Q., "Wind loading and its effects on single-layer reticulated cylindrical shells" 94 : 949-973, 2006
1 Uematsu, Y., "Wind-induced dynamic response and resultant load estimation of a circular flat roof" 83 : 251-261, 1999
2 Taylor, T. J., "Wind pressures on a hemispherical dome" 40 : 199-213, 1991
3 Kitagawa, T., "Wind pressures measurement on end-cell-induced vibration of a cantilevered circular cylinder" 90 : 395-405, 2002
4 Portela, G., "Wind pressures and buckling of cylindrical steel tanks with a dome roof" 61 : 808-824, 2005
5 Portela, G., "Wind pressures and buckling of cylindrical steel tanks with a conical roof" 61 : 786-807, 2005
6 Yunjie Wang, "Wind pressure characteristics of a low-rise building with various openings on a roof corner" 한국풍공학회 21 (21): 1-23, 2015
7 Maher, F. J., "Wind loads on dome-cylinders and dome-cone shapes" 91 (91): 79-96, 1966
8 Blackmore, P. A., "Wind loads on cylindrical roofs"
9 Macdonald, P.A., "Wind loads on circular storage bins, silos and tanks: Point pressure measurements" School of Civil and Mining Engineering University of Sydney 1988
10 Li, Y. Q., "Wind loading and its effects on single-layer reticulated cylindrical shells" 94 : 949-973, 2006
11 Okamoto, S., "Vortex shedding from a circular cylinder of finite length placed on a ground plane" 114 : 512-521, 1992
12 Farivar, D., "Turbulent uniform flow around cylinders of finite length" 19 : 275-281, 1981
13 Maryam Asghari Mooneghi, "Towards guidelines for design of loose-laid roof pavers for wind uplift" 한국풍공학회 22 (22): 133-160, 2016
14 Hain, R., "Tomographic and time resolved PIV measurements on a finite cylinder mounted on a flat plate" 45 (45): 715-724, 2008
15 Sumner, D., "Tip vortex structure for a circular cylinder with a free end" 96 : 1185-1196, 2008
16 Faghih, A.K., "Three dimensional numerical investigation of air flow over domed roofs" 98 : 161-168, 2010
17 West, G.S., "The effects of tunnel blockage and aspect ratio on the mean flow past a circular cylinder with Reynolds numbers between 104 and 105" 114 : 361-377, 1982
18 Dobriloff, C., "Surface pressure and wall shear stress measurements on a wall mounted cylinder" 106-, 2009
19 Kareem, A., "Pressure and force fluctuations on isolated roughened circular cylinders of finite length in boundary layer flows" 13 : 907-933, 1999
20 Javadi, K., "On the turbulent flow structures over a short finite cylinders: numerical investigation" 2014
21 Purdy, D. M., "Model studies of wind loads on flat-top cylinders" 93 : 379-395, 1967
22 Uematsu, Y., "Model of wind pressure field on circular flat roofs and its application to load estimation" 96 : 1003-1014, 2008
23 Pattenden, R. J., "Measurements of the flow over a low-aspect-ratio cylinder mounted on a ground plane" 39 : 10-21, 2005
24 Afgan, I., "Large eddy simulation of turbulent flow for wall-mounted cantilever cylinders of aspect ratio 6 and 10" 28 : 561-574, 2007
25 Fröhlich, J., "LES of the flow around a circular cylinder of finite height" 25 : 537-548, 2004
26 Park, C.W., "Flow structure around two finite circular cylinders located in boundary layer: side-by-side arrangement" 17 : 1043-1058, 2003
27 Park, C.W., "Flow structure around a finite circular cylinder embedded in various atmospheric boundary layers" 30 : 197-215, 2002
28 Krajnovic, S., "Flow around a tall finite cylinder explored by large eddy simulation" 676 : 294-317, 2011
29 Hongo, T., "Experimental study of wind forces on spherical roofs" Tohoku University 1995
30 Holman, J. P., "Experimental methods for engineer" McGraw-Hill Book Company 1994
31 Park, C.W., "Effects of free-end corner shape on flow structure around a finite cylinder" 19 : 141-158, 2004
32 Sabransky, I.J., "Design pressure distribution on circular silos with conical roofs" 26 (26): 65-84, 1987
33 Cheng, C.M., "Characteristics of wind loads on a hemispherical dome in smooth flow and turbulent boundary layer" 98 : 328-344, 2010
34 Tavakol, M.M., "Air flow aerodynamic on a wall-mounted hemisphere for various turbulent boundary layers" 34 : 538-553, 2010
35 Leder, A., "3D-flow structures behind truncated circular cylinders" 2003