초미세 결정립 조직을 만들기 위한 복합전단가공법에 관한 연구 = A Study on the Hybrid-ECAP Process to Produce Ultra-Fine Materials

다국어 초록 (Multilingual Abstract)

The development of the equal channel angular pressing(ECAP) process in metals has recently provided a feasible solution to produce ultra-fine or nano-grained bulk materials with tailored material properties. However, ECAP process is difficult to scale up commercially due to requirements of an excessive load. In this paper, a new Hybrid-ECAP process with torsional die is considered to obtain materials of ultra-fine grain structure under low forming load. An upper bound analysis and numerical simulation (DEFORM 3D, a commercial FEM code) are carried out on the torsional die. By the upper bound analysis, analytical expression for the compression force and rotation speed are obtained. By the FEM analysis, the distribution of strain, stress and deformation are obtained. These results show that the Hybrid-ECAP is a useful process because this process can obtain the homogeneous deformations with relatively low forming load. Additionally, due to decreased forming load, die life can be improve.

참고문헌 (Reference)

1 박재훈, "상계해석을 이용한 축대칭 후방압출 공정의 Corner Cavity 해석" 17 (17): 144-150, 2000

2 권기환, "Pure- Zr의 ECAP 공정에서 마찰이 재료의 변형 거동과변형에 미치는 영향" 18 (18): 182-187, 2001

3 Akira Azushima, "Properties of Ultrafine-Grained Steel by Repeated Shear Deformation of Side Extrusion Process" 337 (337): 45-49, 2002

4 Yoshinori Iwahashi, "Principle if Equal- Channel Angular Pressing for the Processing of Ultra-Fine Grained Materials" 35 (35): 143-146, 1996

5 V.M.Segal, "Materials Processing by Simple Shear" 197 : 157-164, 1995

6 Y. H. KIM, "Material Science Forum" 426 : 2777-2782, 2003

7 강효경, "ECAP법에 의해 제조된 6061 알루미늄 합금의 미세조직과 기계적 특성에 미치는 가공온도의 영향" 40 (40): 168-176, 2002

8 Kiaotaka Nakashima, "Development of a Multi-Pass Facility for Equal-Channel Angular Pressing to High Total Strains" 281 (281): 82-87, 1999

9 Y. H. Kim, "An upper Bound Analysis for Torsional Upset Forging of Cylindrical Billets" 2 : 859-864, 1999

10 Y. Wu, "An Experimental Study of Equal Channel Angular Extrusion" 37 (37): 437-442, 1997