면외방향 어긋난 보를 갖는 철골모멘트골조의 접합부 성능 = Connection Performance of Steel Moment Frame with Out-of-Plane Beam Skew

다국어 초록 (Multilingual Abstract)

This study investigated the behavior of out-of-plane skewed moment connections that were designed as IMFs, as per the Korean standards. A total of 14 finite element models were constructed with the consideration of two types (single- and double-sided connections) and four levels of skew angle (0°, 10°, 20°, and 30°). The results indicated that the skewed connections considered in this study met the acceptance criteria for IMFs given by the codes. However, the load-carrying capacities of skewed connections were decreased as the skew angle increased. For the connection with a skew angle of 30°, the peak load was noted to be 13% less and the energy dissipation capacity could be 26% less than that of non-skewed connection. In addition, because of the skewed nature, the stress distribution in the skewed beam flange near the connection was asymmetric and the stresses were concentrated on the beam inner flange. Column twisting induced by the skewed configuration was very small and negligible in the beam and column combination considered in this study.

국문 초록 (Abstract)

본 연구에서는 국내 내진설계기준에 의해 중간모멘트골조로 설계된 철골 모멘트접합부에서 면외방향 어긋남을 갖는 보가 접합부의 거동에 미치는 영향을 평가하였다. 기둥을 중심으로 보가 접합되는 형식에 따라 2가지 경우(단면접합 및 양면접합)와 각각의 경우에 대하여 4개 수준의 어긋남 각도(0°, 10°, 20°, 30°)를 조합하여 총 14개의 유한요소해석 모델을 구성하였다. 해석결과, 면외 어긋남을 갖는 대상 모멘트 접합부는 국내 구조기준에 따른 중간모멘트골조의 성능수준을 만족하는 것으로 나타났다. 그러나, 면외 어긋남 각도가 커질수록 접합부 시스템의 하중저항능력이 감소하였다. 면외 어긋남 각도가 30°인 접합부에서 보-기둥이 직교된 접합부에 비하여 최대 하중은 약 13% 감소하였고, 층간 변위각 0.02 rad까지의 에너지 소산능력은 최대 26% 감소하였다. 또한, 어긋남 형상에 기인하여 접합부와 인접한 보 플랜지에서 응력이 비대칭으로 분포되며, 보 플랜지와 기둥 플랜지가 예각을 이루는 내측 플랜지(Inner Flange)에 응력이 집중되었다. 본 연구에서 고려한 보-기둥 접합에서는 어긋난 보에 의해 기둥의 축방향 회전에 미치는 영향은 미미하여 무시할 만 하였다.

참고문헌 (Reference)

1 El Tawil, S., "Strength and Ductility of FR Welded-Bolted Connections" SAC Joint Venture 1998

2 홍종국, "Sloped RBS Moment Connections at Roof Floor Subjected to Cyclic Loading: Analytical Investigation" 한국강구조학회 19 (19): 329-339, 2019

3 Mashayekh, A., "Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames" University of California 2017

4 Hamberger, R. O., "NEHRP Seismic Design Technical Brief No. 2, Seismic Design of Steel Special Moment Frames: A Guide for Practicing Engineers" National Institute of Standards and Technology 2009

5 MOLIT., "KDS 41 31 00: Structural Design Code for Steel Buildings"

6 MOLIT., "KDS 41 17 00: Seismic Design Code for Building Structures"

7 MOLIT., "KDS 14 31 60: Seismic Design Code for Steel Structures, Ministry of Land"

8 Kim, D. W,, "Evaluation of Sloped RBS Moment Connections" ASCE 142 (142): 1-10, 2016

9 Masoud Hoseinzadeh Asl ; Mahsa Saeidzadeh ; Seyedbabak Momenzadeh, "Evaluation of Friction Strength Loss in Endplate Moment Connections with Skewed Beam" 한국강구조학회 19 (19): 1767-1784, 2019

10 Prinz. G, S., "Demands on Reduced Beam Section Connections with Out-of-Plane Skew" ASCE 142 (142): 04015095-04015091, 2016

11 Kim, D. W., "Cyclic Testing of Non-orthogonal Steel Moment Connections for LAX TBIT Modification" University of California 2010

12 Jong-Kook Hong ; Yeun Chul Park ; 심형보, "Cyclic Perofrmance of Easy Quality (EQ) Moment Connections as an Intermediate Steel Moment Frame" 한국강구조학회 19 (19): 1272-1282, 2019

13 Hartioper, A. R., "Constitutive Modeling of Structural Steels : Nonlinear Isotropic/Kinematic Hardening Material Model and Its Calibration" ASCE 147 (147): 04021031-04021031, 2021

14 Kauffmann, E. J., "Characterization of Cyclic Inelastic Strain Behavior on Properties of A572 Gr.50 and A913 Gr.50 Rolled Sections" National Center for Engineering Research on Advanced Technology for Large Structural Systems 2001

15 AISC, "ANSI/AISC 341-16: Seismic Provisions for Structural Steel Buildings"

16 ABAQUS, "ABAQUS/CAE users’ guide, Ver. 6.24"

17 MOLIT., "2016 Korean Building Code"