Generation of Isochronous Stress-Strain Curves with a Nonlinear Least Square Fitting Method for Modified 9Cr-1Mo Steel

다국어 초록 (Multilingual Abstract)

This study deals with the generation of isochronous stress-strain curves for modified 9Cr-1Mo steel. Material
property data (sy, D, and m) from tensile tests and strain-time curves from creep tests were obtained at 550 °C.
On the basis of the experimental data, the creep curves were characterized by Garofalo’s creep model. The
three parameters of P1, P2 and P3 in Garofalo’s model could be optimized properly by a nonlinear least
square fitting analysis. The three parameters showed a good stress dependency with a linear relation. However,
the P3 parameter, which represents the steady state creep rate, exhibited two-slope behavior with different
stress exponents at a transient stress of about 250 MPa. The results verify that the long-term creep curves
for G91 steel can be modeled by Garofalo’s model with only several short-term creep data. When the modeled
creep curves are used, long-term isochronous curves of up to 105 h can be successfully constructed.

참고문헌 (Reference)

1 S. G. Hong, 288 : 202-, 2001

2 J. T. Yeom, 9 : 555-, 2003

3 W. G. Kim, 261 : 1103-, 2005

4 B. K. Choudhary, 52 : 327-, 1999

5 K. Maruyama, 21 : 233-, 1987

6 L. D. Blackburn, "Isochronous Stress Strain Curves for Austenitic Steels" ASME 15-48, 1972

7 F. Garofalo, "Fundamentals of Creep and Creep Rupture in Metals" Macmillan Co. 10-27, 1966

8 R. K. Penny, "Design for Creep, 2nd ed" Chapman & Hall 24-27, 1995

9 R. W. Evans, "Creep of Metals and Alloys" Institute of Metals 197-256, 1985

10 R. W. Swindeman, "ASME Pressure Vessel and Piping Conf." 1997