Design of Roll Profile for LM-Guide Block in Horizontal- Vertical Shape Rolling by 3D-EFA

다국어 초록 (Multilingual Abstract)

In this paper, the design method for intermediate rolls has been developed to manufacture a linear motion (LM) guide block inhorizontal-vertical (H-V) shape rolling, based on the three-dimensional electric field analysis (3D-EFA). This design method canpredict appropriate cross-sections of roll profile at each pass based on the initial and final shapes. 3D-EFA simulations are performedseparately for the horizontal and vertical rolling passes to obtain roll profiles from equipotential lines. The roll profiles obtained basedon 3D-EFA are simulated by the commercial program Deform 3D, and are the reselected by compensating for the area of the errorfrom the equipotential lines. For convenience of field work and reducing strain concentration of the products, the roll profiles for thefirst and second passes are modified to be flat rolls because the roll profiles are almost rectangular. The effectiveness of the proposeddesign method is verified experimentally using AISI4120 steel for H-V shape rolling. From the experimental results, some over- andunder-filling ate the roll gap are observed for the final pass. However the dimensional errors are within ±0.3 mm, and no crackingor shearing is observed. The proposed design method will improve the efficiency of the design process by reducing time and costs.

참고문헌 (Reference)

1 Huang, H. G., "Void Closure Behavior in Large Diameter Steel Rod during H-V Rolling Process" 21 (21): 287-294, 2014

2 Micari, F., "Three-Dimensional Coupled Thermo-Mechanical Analysis of Hot Rolling Processes" 34 (34): 303-310, 1992

3 Mori, K., "Simulation of Three-Dimensional Deformation in Rolling by the Finite-Element Method" 26 (26): 515-525, 1984

4 Tafel, W., "Rolling and Roll Pass Design"

5 Yu, H. L., "Research on the Behavior of Transversal Crack in slab V-H Rolling Process by FEM" 209 (209): 2876-2886, 2009

6 Mróz, S., "Numerical Modelling of the Metal Flow and Stock Bending during the Rolling of Unequal Angle Bar" 177 (177): 561-565, 2006

7 Zang, X. L., "Head and Tail Shape Control in Vertical-Horizontal Rolling Process by FEM" 16 (16): 35-42, 2009

8 Wusatowski, Z., "Fundamentals of Rolling" Pergamon Press 610-624, 1969

9 Siebel, E., "Formability in Metal Working"

10 Yu, H. L., "Explicit Dynamic FEM Analysis of Multipass Vertical-Horizontal Rolling" 13 (13): 26-30, 2006

11 Ding, Y., "Effect of Vertical Rolling at Various Temperatures on Subsequent Multi-Pass Severe Rolling of AZ31B Alloy Sheet" 213 (213): 2101-2108, 2013

12 Wusatowski, Z., "Draught, Elongation and Spread in Hot Rolling" 27-58, 1949

13 Chun, M. S., "Deformation Behavior of a Slab with Width Reduction in a Hot Mill" 14 (14): 408-412, 2005

14 Lahoti, G., "Computer-Aided Analysis of Metal Flow and Stresses in Plate Rolling" 4 (4): 105-119, 1980

15 Xiong, S., "Analysis of Non-Steady State Slab Edging in Roughing Trains by a Three-Dimensional Rigid-Plastic Finite Element Method" 40 (40): 1573-1585, 2000

16 Yu, H. L., "Analysis of Crack Tip Stress of Transversal Crack on Slab Corner during Vertical-Horizontal Rolling Process by FEM" 15 (15): 19-26, 2008

17 Xiong, S., "A Three-Dimensional Finite Element Simulation of the Vertical–Horizontal Rolling Process in the Width Reduction of Slab" 101 (101): 146-151, 2000

18 Shinokura, T., "A New Method for Calculating Spread in Rod Rolling" 2 (2): 94-99, 1982

19 Kim, H. J., "A New Free Surface Scheme for Analysis of Plastic Deformation in Shape Rolling" 104 (104): 81-93, 2000

20 Shivpuri, R., "A Methodology for Roll Pass Optimization for Multi-Pass Shape Rolling" 32 (32): 671-683, 1992

21 Forouzan, M. R., "A Comparative Study of Slab Deformation under Heavy Width Reduction by Sizing Press and Vertical Rolling using FE Analysis" 209 (209): 728-736, 2009