폴리프로필렌 섬유 보강 EVA 콘크리트의 압축강도 및 내구성 = The Compressive Strength and Durability Properties of Polypropylene Fiber Reinforced EVA Concrete

다국어 초록 (Multilingual Abstract)

The important properties of EVA (ethylene vinyl acetate) redispersible polymer was waterproof, densification of internal pore space of concrete and ball bearing and micro filler. Also, the significant role of polypropylene(PP) fiber was crack control and blockade of movement for deterioration factors. The most studies for EVA were limited in the field of mortar and PP fiber reinforced concrete had been studied in the state of being restricted unit water content, rich mix and mixing much of the fiber without considering construction site. Therefore, the control mix design were applied in ready mixed concrete using 10 % fly ash of total cement weight used in batch plant. On the basis of control mix design, EVA contents ranging from 0 % to 10 % of total cement weight and PP fiber contents ranging from 0 % to 0.5 % of EVA concrete volume were used in the mix designs. The results showed the maximum compressive strength value was measured at EVA 5.0 % and PP fiber 0.1 %, the minimum water absorption ratio was at EVA 10 % and PP fiber 0 %, the durability factor for freezing and thawing resistance was at EVA 5.0 % and PP fiber 0.3 % and the minimum weight reduction ratio of resistance to sulfuric acid attack was at EVA 10 % and PP fiber 0.5 % after curing age 42days. Meanwhile, From these results, PP fiber reinforced EVA concrete would be very benefit, if each optimal mix types were used in hydraulic structures, underground utilities and agricultural structures.

참고문헌 (Reference)

1 김동현, "황산염에 노출된 구조용 합성섬유와 라텍스 개질 시멘트 모르타르의 부착특성에 미치는 광물질 혼화재의 효과" 한국농공학회 54 (54): 25-34, 2012

2 성찬용, "폴리프로필렌 섬유보강 에코콘크리트의 동결융해 특성" 한국농공학회 48 (48): 59-66, 2006

3 노경희, "폴리프로필렌 섬유보강 고유동 콘크리트의 역학적 및 건조수축 특성" 한국농공학회 46 (46): 79-85, 2004

4 조백순, "폴리프로필렌 및 강섬유 보강콘크리트의 휨 성능에 관한 비교 연구" 대한토목학회 34 (34): 1677-1685, 2014

5 조영국, "폴리머 시멘트 복합체의 투수성 및 건조수축에 관한 연구" 한국건축시공학회 9 (9): 73-79, 2009

6 권민호, "친환경 UM수지를 사용한 섬유보강 폴리머 시멘트 모르타르의 내구성 및 강도 특성" 한국콘크리트학회 25 (25): 313-320, 2013

7 김인수, "재유화형 분말수지와 고로 슬래그 미분말을 혼입한 폴리머 콘크리트의 압축강도 및 내산성" 한국농공학회 50 (50): 19-27, 2008

8 배상찬, "재유화형 분말수지를 이용한 폴리머 시멘트 모르타르의 특성" 한국건축시공학회 13 (13): 235-241, 2013

9 박성기, "라텍스개질 콘크리트의(LMC)의 강도특성 및 배합인자 결정방법" 한국농공학회 50 (50): 39-50, 2008

10 성찬용, "강섬유 보강 EVA 콘크리트의 역학적 특성 및 내마모성" 한국농공학회 56 (56): 45-54, 2014

11 Afridi, M. U. K., "Water retention and adhesion of powdered and aqueous polymer-modified mortars" 17 (17): 113-118, 1995

12 Silviya, E. K., "Thermal and mechanical characterization of EVA/Banana fiber-derived cellulose composites" 125 : 786-792, 2012

13 Kakooei, S., "The effects of polypropylene fibers on the properties of reinforced concrete structures" 27 (27): 73-77, 2012

14 Song, H. W., "Factors influencing chloride transport in concrete structures exposed to marine environments" 30 (30): 113-121, 2008

15 Silva, D. A., "Evidences of chemical interaction between EVA and hydrating Portland cement" 32 : 1,383-1,390, 2002

16 김영익, "EVA 개질 고강도 콘크리트의 강도 및 수밀 특성" 한국농공학회 49 (49): 45-54, 2007

17 Silva, D. A., "ESEM analysis of polymeric film in EVA-modified cement paste" 35 : 2,047-2,050, 2005

18 Kim, M. H., "A study on watertightness effect of Waterproofing admixture mixed redispersible polymer and siliceous powder" 14 (14): 660-667, 2000