캡슐 하단부 구조변경에 따른 압력강하 및 진동특성

다국어 초록 (Multilingual Abstract)

The bottom structure of an instrumented capsule is a part which is joined at the receptacle of the flow tube in the reactor in-core. A geometrical change of the bottom structure has an effect on the pressure drop and the vibration of the capsule. The out-pile test to evaluate the structural integrity of the material capsule called 04M-17U was performed by using a single channel and a half core test loop. From the pressure drop test, the optimized diameter of the cone shape's bottom structure which satisfies HANARO's flow requirement (19.6 kg/s) is 71 mm. The maximum displacement of the capsule measured at the half core test loop is lower than 1.0 mm. From the analysis results, it is found that the test hole will not be interfered with near the flow tubes because its displacement due to the cooling water is very small at 0.072 mm. The fundamental frequency of the capsule under water is 9.64 Hz. It is expected that the resonance between the capsule and the fluid flow due to the cooling water in HANARO's in-core will not occur. Also, the new bottom structure of a solid cone shape with 71 mm in diameter will be applicable to the material and special capsules in the future.

참고문헌 (Reference)

1 대우정밀(주), "＂하나로 계장캡슐(04M- 17U) 설계/제작" 대우정밀 2005

2 주기남, "＂Dowel pin 형 캡슐 하단부 설계변경＂" 한국원자력연구소. 2005

3 최명환, "핵연료 조사시험용 캡슐 구조물의 좌굴 및 진동특성" 14 (14): 741-748, 2004

4 조만순 외, "캡슐 노외시험시설 활용" 한국원자력연구소. 2003

5 류정수, "침니 내부지지대 및 계장형 핵연료 시험다발에 대한 진동시험 절차서" 하나로이용연구단, 한국원자력연구소 0 : 2000

6 이영신, "진동시험 및 해석을 통한 하나로 캡슐 구조물의 구조건전성 평가" 10 (10): 261-268, 2000

7 최명환 외, "원추형 하단부 구조를 갖는 캡슐의 노외시험" 한국원자력연구소. 2004

8 Lee, "Thermal and Mechanical Characteristics of an Instrumented Capsule for a Material Irradiation Test" 205 (205): 205-212, 2001

9 SDRC,, "I-DEAS Master Series 10.0" 2004

10 Blevins, "Formulas for Natural Frequency and Mode Shape" Van Nostrand Reinhold Company 1979

11 Kang, "Capsule Development and Utilization for Material Irradiation Tests" 2003

12 ANSYS IP Inc, "ANSYS User's manual" ANSYS IP Inc. 2005