Solar cell was made from 1 ohm·cm polycrystalline silicon which had been directionally solidified using split, reusable graphite molds coated with Si₃N₄. Silicon n/p homojunction solar cell was fabricated through the following steps; wafer slicin...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A3233646
1995
Korean
436
KCI등재
학술저널
701-705(5쪽)
0
상세조회0
다운로드다국어 초록 (Multilingual Abstract)
Solar cell was made from 1 ohm·cm polycrystalline silicon which had been directionally solidified using split, reusable graphite molds coated with Si₃N₄. Silicon n/p homojunction solar cell was fabricated through the following steps; wafer slicin...
Solar cell was made from 1 ohm·cm polycrystalline silicon which had been directionally solidified using split, reusable graphite molds coated with Si₃N₄. Silicon n/p homojunction solar cell was fabricated through the following steps; wafer slicing, texturizing etch, P diffusion, anti-reflection coating application, grid formation and contact annealing. The cell area was 9㎠. Under the airmass 1.5 illumination, a short circuit current of 0.232A and an open circuit voltage of 0.582V were obtained with a curve fill factor of 0.666. The maximum energy conversion efficiency was 10.0% under standard terrestrial test conditions (AM 1.5, 100mW/㎠).
Sol-Gel 법에 의하여 제조된 Mullite 박막에 관한 연구
초크랄스키법에 의한 실리콘 단결정 성장시 커스프 자기장이 유동 및 물질전달에 미치는 영향
저압화학증착된 혼합상 실리콘 박막의 형성기구에 관한 투과전자현미경 연구