모터링시 전류 파형과 크랭크각 센서를 이용한 기관의 압축압력 및 밸브 타이밍 분석

다국어 초록 (Multilingual Abstract)

Compression pressure of individual cylinder and valve timing have big influence on combustion pressure, indicated mean effective pressure (IMEP), emission, vibration, combustion noise and many other combustion parameters. Conventional method, however, to check compression pressure uniformity is done by mechanical pressure gage and valve timing is checked manually. This conventional method causes inaccuracy of cylinder pressure measurement because of different cranking speed results from battery status and temperature. Also to check valve timing, related FEAD parts should be disassembled and timing mark should be checked. This study describes and suggests new methodology to measure compression pressure by analysis of start motor current and to check valve timing by cylinder pressure with high accuracy. Results, it is found that detection of bulky as well as small leaky cylinder is possible by cranking motor current analysis and wrong valve timing can be detected by cylinder pressure analysis and cam and crank sensor signal.

참고문헌 (Reference)

1 조용석, "가변밸브 작동기구를 적용한 가솔린 기관의 잔류가스분율, 체적효율, 펌핑손실 예측을 위한 해석적 연구" 한국자동차공학회 18 (18): 7-13, 2010

2 J. H. Lee, "Numerical Analysis of Flow Characteristics of Residual Gas due to Change of Valve Timing during an Idle Operation in an SI Engine" 68-73, 2005

3 J. B. Heywood, "Internal Combustion Engine Fundamentals" McGraw Hill 161-163, 1988

4 I. T. Kim, "Evaluation of Cylinder Compression Pressure Uniformity by Analysis of Motoring Current" 7-11, 2010

5 W. W. Pulkrabek, "Engineering Fundamentals of the Internal Combustion Engine" Prentice Hall 68-81, 1997

6 S. R. Choi, "An Experimental Study on the Fault Diagnosis of Automotive Engine by Waveform Analysis of Intake Manifold Pressure Sensor" 239-244, 2004

7 H.-I. Kim, "A Fundamental Study of Friction Characteristics according to Temperature of Engine Oil" 69-74, 2007