RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      KCI등재

      전로슬래그 및 페로니켈슬래그를 혼입한 모르타르의 기초물성 연구

      한글로보기

      https://www.riss.kr/link?id=A107777882

      • 0

        상세조회
      • 0

        다운로드
      서지정보 열기
      • 내보내기
      • 내책장담기
      • 공유하기
      • 오류접수

      부가정보

      국문 초록 (Abstract)

      본 연구에서는 건설 산업의 고도화에 따라 대량 발생하는 철강 슬래그 및 페로니켈슬래그의 활용을 위해 모르타르 배합에 혼입하여 실험적 연구를 진행하였다. 물의 흡수율이 낮은 BOF와 표면이 매끄러운 성질을 가진 FNS를 시멘트에 치환하면, 희석효과(dilution effect) 작용으로 플로 값과 응결시간이 증가하였다. 다만, BOF를 표준사 대비 10% 초과하여 혼입할 경우 재료 분리 현상(segregation)이 발생하였고, 이에 다량의 혼입 배합은 실험에서 제외하였다. BOF 잔골재와 FNS 혼입 모르타르는 응결 지연으로 인한 수화열 감소로 종결이 완료된 후 길이변화가 발생하지 않았다.
      BOF 잔골재를 혼입한 모르타르의 압축강도는 표준사와 시멘트만을 혼입한 모르타르 강도 보다 감소되었지만 FNS와 함께 혼입한 배합의 경우 양생 일이 증가함에 따라 압축강도도 증가하였다. BOF 잔골재를 혼입한 B10F0 및 B10F20 모르타르에서는 수화가 진행되어 BOF 원재료 XRD에서 관찰할 수 있었던 larnite, mayenite, wuestite 클링커는 거의 관찰되지 않았지만, FNS의 낮은 수화 반응성으로 FNS의 클링커는 관찰되었다. 주사전자현미경 분석 결과 수화결정체로 존재하지 않고 수화가 진행 중인 FNS를 확인할 수 있었으며 이를 통해 FNS의 잠재수경성을 확인하였다. FNS를 첨가하지 않은 시편의 경우 BOF 골재가 겔이나 침상결정이 아닌 전체가 괴상으로 존재하였으며, 인산화칼슘(calcium phosphate) 형성을 확인하였다. 다만, 전로슬래그를 혼입할 경우 내부 공극은 밀실함이 다소 저하되었으며, 추후 BOF를 잔골재 또는 건설 재료로 활용할 경우 적정 배합비 선정이 필요할 것으로 판단된다.
      번역하기

      본 연구에서는 건설 산업의 고도화에 따라 대량 발생하는 철강 슬래그 및 페로니켈슬래그의 활용을 위해 모르타르 배합에 혼입하여 실험적 연구를 진행하였다. 물의 흡수율이 낮은 BOF와 표...

      본 연구에서는 건설 산업의 고도화에 따라 대량 발생하는 철강 슬래그 및 페로니켈슬래그의 활용을 위해 모르타르 배합에 혼입하여 실험적 연구를 진행하였다. 물의 흡수율이 낮은 BOF와 표면이 매끄러운 성질을 가진 FNS를 시멘트에 치환하면, 희석효과(dilution effect) 작용으로 플로 값과 응결시간이 증가하였다. 다만, BOF를 표준사 대비 10% 초과하여 혼입할 경우 재료 분리 현상(segregation)이 발생하였고, 이에 다량의 혼입 배합은 실험에서 제외하였다. BOF 잔골재와 FNS 혼입 모르타르는 응결 지연으로 인한 수화열 감소로 종결이 완료된 후 길이변화가 발생하지 않았다.
      BOF 잔골재를 혼입한 모르타르의 압축강도는 표준사와 시멘트만을 혼입한 모르타르 강도 보다 감소되었지만 FNS와 함께 혼입한 배합의 경우 양생 일이 증가함에 따라 압축강도도 증가하였다. BOF 잔골재를 혼입한 B10F0 및 B10F20 모르타르에서는 수화가 진행되어 BOF 원재료 XRD에서 관찰할 수 있었던 larnite, mayenite, wuestite 클링커는 거의 관찰되지 않았지만, FNS의 낮은 수화 반응성으로 FNS의 클링커는 관찰되었다. 주사전자현미경 분석 결과 수화결정체로 존재하지 않고 수화가 진행 중인 FNS를 확인할 수 있었으며 이를 통해 FNS의 잠재수경성을 확인하였다. FNS를 첨가하지 않은 시편의 경우 BOF 골재가 겔이나 침상결정이 아닌 전체가 괴상으로 존재하였으며, 인산화칼슘(calcium phosphate) 형성을 확인하였다. 다만, 전로슬래그를 혼입할 경우 내부 공극은 밀실함이 다소 저하되었으며, 추후 BOF를 잔골재 또는 건설 재료로 활용할 경우 적정 배합비 선정이 필요할 것으로 판단된다.

      더보기

      다국어 초록 (Multilingual Abstract)

      Converter steel slag(BOF slag) is a vast amount of solid waste generated in the steelmaking process which has very low utilization rate in Korea. Due to the presence of free CaO which can derive bad volume stability in BOF slag, it usually land filled. For recycling BOF and identify its applicability as fine aggregate, this study investigates the fundamental characteristics of mortar with cement replaced ferronickel slag(FNS), which has the potential to be used as a binder. The results suggest that the mineral phases of BOF slag mainly include larnite(CaSiO₄), mayenite(Ca12Al14O33) and wuestite(FeO) while olivine crystallines are shown in FNS. The results of flow and setting time reveals that the flowability and process of hardening increased when the amount of FNS and BOF slag incorporated was increased. The length change shows that the amount of change in the length of the mortar was almost constant regardless of mix proportion while compressive strength was reduced. Micro structure test results revealed that FNS or/and BOF slag mix took a long time to react in the cement matrix to form a complete hydration products. To achieve the efficient utilization of BOF slag as construction materials, proper replacement rate is necessary.
      번역하기

      Converter steel slag(BOF slag) is a vast amount of solid waste generated in the steelmaking process which has very low utilization rate in Korea. Due to the presence of free CaO which can derive bad volume stability in BOF slag, it usually land filled...

      Converter steel slag(BOF slag) is a vast amount of solid waste generated in the steelmaking process which has very low utilization rate in Korea. Due to the presence of free CaO which can derive bad volume stability in BOF slag, it usually land filled. For recycling BOF and identify its applicability as fine aggregate, this study investigates the fundamental characteristics of mortar with cement replaced ferronickel slag(FNS), which has the potential to be used as a binder. The results suggest that the mineral phases of BOF slag mainly include larnite(CaSiO₄), mayenite(Ca12Al14O33) and wuestite(FeO) while olivine crystallines are shown in FNS. The results of flow and setting time reveals that the flowability and process of hardening increased when the amount of FNS and BOF slag incorporated was increased. The length change shows that the amount of change in the length of the mortar was almost constant regardless of mix proportion while compressive strength was reduced. Micro structure test results revealed that FNS or/and BOF slag mix took a long time to react in the cement matrix to form a complete hydration products. To achieve the efficient utilization of BOF slag as construction materials, proper replacement rate is necessary.

      더보기

      목차 (Table of Contents)

      • 1. 서론
      • 2. 실험개요
      • 3. 시험결과 및 분석
      • 4. 결론
      • References
      • 1. 서론
      • 2. 실험개요
      • 3. 시험결과 및 분석
      • 4. 결론
      • References
      더보기

      동일학술지(권/호) 다른 논문

      분석정보

      View

      상세정보조회

      0

      Usage

      원문다운로드

      0

      대출신청

      0

      복사신청

      0

      EDDS신청

      0

      동일 주제 내 활용도 TOP

      더보기

      주제

      연도별 연구동향

      연도별 활용동향

      연관논문

      연구자 네트워크맵

      공동연구자 (7)

      유사연구자 (20) 활용도상위20명

      이 자료와 함께 이용한 RISS 자료

      나만을 위한 추천자료

      해외이동버튼