Experimental and numerical study on pre-peak cyclic shear mechanism of artificial rock joints

다국어 초록 (Multilingual Abstract)

The pre-peak cyclic shear mechanism of two-order asperity degradation of rock joints in the direct shear tests with static constant normal loads (CNL) are investigated using experimental and numerical methods. The laboratory testing rock specimens contains the idealized and regular two-order triangular-shaped asperities, which represent the specific geometrical conditions of natural and irregular waviness and unevenness of rock joint surfaces, in the pre-peak cyclic shear tests. Three different shear failure patterns of two-order triangular-shaped rock joints can be found in the experiments at constant horizontal shear velocity and various static constant normal loads in the direct and pre-peak cyclic shear tests. The discrete element method is adopted to simulate the pre-peak shear failure behaviors of rock joints with two-order triangular-shaped asperities. The rock joint interfaces are simulated using a modified smooth joint model, where microscopic scale slip surfaces are applied at contacts between discrete particles in the upper and lower rock blocks. Comparing the discrete numerical results with the experimental results, the microscopic bond particle model parameters are calibrated. Effects of cyclic shear loading amplitude, static constant normal loads and initial waviness asperity angles on the pre-peak cyclic shear failure behaviors of triangular-shaped rock joints are also numerically investigated.

참고문헌 (Reference)

1 Amiri, F., "XFEM interpolants, a seamless bridge between XFEM and enriched meshless methods" 53 (53): 45-57, 2014

2 Cai, X., "Water-weakening effects on the mechanical behavior of different rock types : phenomena and mechanisms" 9 (9): 4450-, 2019

3 Dang, W. G., "Velocity-frequency-amplitude-dependent frictional resistance of planar joints under dynamic normal load(DNL)conditions" 79 : 27-34, 2018

4 Hongmei Zhang, "Vector mechanics-based simulation of large deformation behavior in RC shear walls using planar four-node elements" 국제구조공학회 74 (74): 1-18, 2020

5 Nowruzpour, M., "Unification of local and nonlocal models within a stable integral formulation for analysis of defects" 132 : 45-59, 2018

6 Gu, D. M., "Understanding the triggering mechanism and possible kinematic evolution of a reactivated landslide in the Three Gorges Reservoir" 14 (14): 2073-2087, 2017

7 Wang, Y., "Three-dimensional numerical study on the failure characteristics of intermittent fissures under compressive-shear loads" 14 (14): 1161-1193, 2019

8 Vahab Sarfarazi, "Three-dimensional numerical modeling of effect of bedding layer on the tensile failure behavior in hollow disc models using Particle Flow Code (PFC3D)" 국제구조공학회 68 (68): 537-547, 2018

9 Huang, Y. H., "Three-Dimensional Numerical Simulation on Triaxial Failure Mechanical Behavior of Rock-Like Specimen Containing Two Unparallel Fissures" 49 (49): 4711-4729, 2016

10 Barton, N., "The shear strength of rock joints in theory and practice" 10 (10): 1-54, 1977

11 Barton, N., "The shear strength of rock and rock joints" 19 (19): 255-279, 1976

12 Eshiet, K., "The role of rock joint frictional strength in the containment of fracture propagation" 12 (12): 897-920, 2017

13 Wang, Y., "The modeling of crack propagation and coalescence in rocks under uniaxial compression using the novel conjugated bond-based peridynamics" 128-129 : 614-643, 2017

14 Yang, Z. Y., "The effect of asperity order on the roughness of rock joints" 38 (38): 745-752, 2001

15 Mehrian, S. Z., "Structural health monitoring using optimising algorithms based on flexibility matrix approach and combination of natural frequencies and mode shapes" 7 (7): 398-411, 2016

16 Thaer Jasim Mohammed, "Strengthening of reinforced concrete beams subjected to torsion with UHPFC composites" 국제구조공학회 56 (56): 123-136, 2015

17 Huang, Y. H., "Strength failure behavior and crack evolution mechanism of granite containing pre-existing non-coplanar holes : experimental study and particle flow modeling" 88 : 182-198, 2017

18 Huang, D., "Step-path failure of rock slopes with intermittent joints" 12 (12): 911-926, 2015

19 Areias, P., "Steiner-point free edge cutting of tetrahedral meshes with applications in fracture" 132 : 27-41, 2017

20 Hadi Haeri, "Simulation of the tensile failure behaviour of transversally bedding layers using PFC2D" 국제구조공학회 67 (67): 493-504, 2018

21 Hadi Haeri, "Simulation of crack initiation and propagation in three point bending test using PFC2D" 국제구조공학회 66 (66): 453-463, 2018

22 Fathi, A., "Shear mechanism of rock joints under pre-peak cyclic loading condition" 83 : 197-210, 2016

23 Meng, F., "Shear behaviour and acoustic emission characteristics of different joints under various stress levels" 49 (49): 4919-4928, 2016

24 Bahaaddini, M., "Scale effect on the shear behaviour of rock joints based on a numerical study" 181 : 212-223, 2014

25 Barton, N., "Review of a new shear-strength criterion for rock joints" 7 (7): 287-332, 1973

26 Wang, Y., "Peridynamic investigation on thermal fracturing behavior of ceramic nuclear fuel pellets under power cycles" 44 (44): 11512-11542, 2018

27 PFC2D, "Particle Flow Code in 2 Dimensions-Version 3.1" Itasca Cons Group 2004

28 Hadi Haeri, "PFC3D simulation of the effect of particle size on the single edge-notched rectangle bar in bending test" 국제구조공학회 68 (68): 497-505, 2018

29 Wang, Y., "Numerical studies on thermal shock crack branching instability in brittle solids" 204 : 157-184, 2018

30 Hadi Haeri, "Numerical simulation of the effect of bedding layer geometrical properties on the punch shear test using PFC3D" 국제구조공학회 68 (68): 507-517, 2018

31 Wang, Y., "Numerical simulation of propagation and coalescence of flaws in rock materials under compressive loads using the extended non-ordinary state-based peridynamics" 163 : 248-273, 2016

32 Zhou, X. P., "Numerical simulation of crack propagation and coalescence in pre-cracked rock-like Brazilian disks using the non-ordinary state-based peridynamics" 89 : 235-249, 2016

33 Park, J. W., "Numerical simulation of a direct shear test on a rock joint using a bonded-particle model" 46 (46): 1315-1328, 2009

34 Kou, M. M., "Numerical investigations on crack propagation and crack branching in brittle solids under dynamic loading using bond-particle mode" 212 : 41-56, 2019

35 Liu, Y., "Numerical investigation of the dynamic properties of intermittent jointed rock models subjected to cyclic uniaxial compression" 50 (50): 89-112, 2017

36 Bahaaddini, M., "Numerical direct shear tests to model the shear behaviour of rock joints" 51 : 101-115, 2013

37 Belem, T., "Modeling surface roughness degradation of rock joint wall during direct and cyclic shearing" 2 (2): 227-248, 2007

38 Potyondy, D. O., "Modeling notch-formation mechanisms in the URL mine-by test tunnel using bonded assemblies of circular particles" 35 (35): 510-511, 1998

39 Cao, R. H., "Mechanical behavior of brittle rock-like specimens with pre-existing fissures under uniaxial loading : experimental studies and particle mechanics approach" 49 (49): 763-783, 2016

40 Huang, Y. H., "Mechanical and cracking behavior of granite containing two coplanar flaws under conventional triaxial compression" 28 (28): 590-610, 2019

41 Benmokrane, B., "Laboratory investigation of shaft resistance of rock-socketed piers using the constant normal stiffness direct shear test" 31 (31): 407-419, 1994

42 Hadi Haeri, "Investigation of the effects of particle size and model scale on the UCS and shear strength of concrete using PFC2D" 국제구조공학회 67 (67): 505-516, 2018

43 Zhou, H., "Investigation of the acoustic emission characteristics of artificial saw-tooth joints under shearing condition" 11 (11): 925-939, 2016

44 Eshiet, K., "Investigation of geomechanical responses of reservoirs induced by carbon dioxide storage" 71 (71): 3999-4020, 2014

45 Song, Z., "Inhomogeneous mechanical behaviour of concrete subjected to monotonic and cyclic loading" 132 : 105383-, 2020

46 Xie, Y., "Influence of crack surface friction on crack initiation and propagation : A numerical investigation based on extended finite element method" 74 : 1-14, 2016

47 Lee, H. S., "Influence of asperity degradation on the mechanical behavior of rough rock joints under cyclic shear loading" 38 (38): 967-980, 2001

48 Bandis, S. C., "Fundamentals of rock joint deformation" 20 (20): 249-268, 1983

49 Zhou, X. P., "Fracturing behavior study of three-flawed specimens by uniaxial compression and 3D digital image correlation : sensitivity to brittleness" 52 (52): 691-718, 2019

50 Bagde, M. N., "Fatigue properties of intact sandstone samples subjected to dynamic uniaxial cyclical loading" 42 (42): 237-250, 2005

51 Cao, R. H., "Failure characteristics of intermittent fissures under a compressive-shear test : Experimental and numerical analyses" 96 : 740-757, 2018

52 Moës, N., "Extended finite element method for cohesive crack growth" 69 (69): 813-833, 2002

53 Jafari, M. K., "Experimental study of mechanical behavior of rock joints under cyclic loading" 37 (37): 3-23, 2004

54 Bandis, S. C., "Experimental studies of scale effects on the shear behaviour of rock joints" 18 (18): 1-21, 1981

55 Bahaaddini, M., "Experimental and numerical study of asperity degradation in the direct shear test" 204 : 41-52, 2016

56 Huang, T. H., "Experimental and mathematical modeling for fracture of rock joint with regular asperities" 69 (69): 1977-1996, 2002

57 Yang, D., "Experiment and study on mechanical property of sandstone post-peak under the cyclic loading and unloading" 36 (36): 1609-1620, 2018

58 Jafari, M. K., "Evaluation of shear strength of rock joints subjected to cyclic loading" 23 (23): 619-630, 2003

59 Moradian, Z. A., "Evaluating damage during shear tests of rock joints using acoustic emission" 47 (47): 590-598, 2010

60 Areias, P., "Element-wise fracture algorithm based on rotation of edges" 110 : 113-137, 2013

61 Wang, L., "Elastodynamics of Linearized Isotropic State-Based Peridynamic Media" 137 : 157-176, 2019

62 Mirzaghorbanali, A, "Effects of cyclic loading on the shear behavior of infilled rock joints under constant normal stiffness conditions" 47 (47): 1373-1391, 2014

63 Mirzaghorbanali, A., "Effect of shear rate on cyclic loading shear behavior of rock joints under constant normal stiffness conditions" 47 (47): 1931-1938, 2014

64 Miaomiao Kou, "Dynamic fracture instability in brittle materials: Insights from DEM simulations" 국제구조공학회 71 (71): 65-75, 2019

65 Zhou, Z., "Dynamic Response and Energy Evolution of Sandstone Under Coupled Static–Dynamic Compression: Insights from Experimental Study into Deep Rock Engineering Applications" 1-27, 2019

66 Dang, W., "Direct shear behavior of a plane joint under dynamic normal load(DNL)conditions" 213 : 133-141, 2016

67 Jiang, Y., "Development of an automated servo-controlled direct shear apparatus applying a constant normal stiffness condition" 41 (41): 275-286, 2004

68 Ferrero, A. M., "Development of a new experimental apparatus for the study of the mechanical behavior of a rock discontinuity under direct and cyclic loads" 43 (43): 685-695, 2010

69 Nanthakumar, S., "Detection of ma-terial interfaces using a regularized level set method in piezoelectric structures" 24 (24): 153-176, 2016

70 Zhou, Z., "Damage Evolution and Failure Behavior of Post-Mainshock Damaged Rocks under Aftershock Effects" 12 (12): 4429-, 2019

71 Dang, W., "Cyclic Frictional Responses of Planar Joints Under Cyclic Normal Load Conditions: Laboratory Tests and Numerical Simulations" 2019

72 Zhang, X. P., "Cracking processes in rock-like material containing a single flaw under uniaxial compression: a numerical study based on parallel bonded-particle model approach" 45 (45): 711-737, 2012

73 Huang, Y. H., "Crack coalescence behavior of sandstone specimen containing two pre-existing flaws under different confining pressures" 99 : 118-130, 2019

74 Moradian, Z. A., "Correlating acoustic emission sources with damaged zones during direct shear test of rock joints" 49 (49): 710-718, 2012

75 Johnston, I. W., "Constant normal stiffness direct shear testing for socketed pile design in weak rock" 37 (37): 83-89, 1987

76 Nowruzpour Mehrian, S. M., "Comprehensive Investigation in Buckling and Free Vibration of Laminate Composite cylindrical Shell" 3 (3): 195-205, 2013

77 Meng, F., "Comparative study on dynamic shear behavior and failure mechanism of two types of granite joint" 245 : 356-369, 2018

78 Meng, F., "Characteristics of asperity damage and its influence on the shear behavior of granite joints" 51 (51): 429-449, 2018

79 Song, Z., "Bonded-particle model-based simulation of artificial rock subjected to cyclic loading" 14 (14): 955-971, 2019

80 Fakhimi, A., "Application of slightly overlapped circular particles assembly in numerical simulation of rocks with high friction angles" 74 (74): 129-138, 2004

81 Wang, Y., "An improved coupled thermo-mechanic bond-based peridynamic model for cracking behaviors in brittle solids subjected to thermal shocks" 73 : 282-305, 2019

82 Li, X., "An extended cohesive damage model for simulating arbitrary damage propagation in engineering materials" 315 : 744-759, 2017

83 Seidel, J. P., "A theoretical model for rock joints subjected to constant normal stiffness direct shear" 39 (39): 539-553, 2002

84 Zhou, X., "A novel conjugated bond linear elastic model in bond-based peridynamics for fracture problems under dynamic loads" 188 : 151-183, 2018

85 Zheng, B., "A new index to describe joint roughness coefficient(JRC)under cyclic shear" 212 : 72-85, 2012

86 Li, X., "A mesh objective continuum damage model for quasi-brittle crack modelling and finite element implementation" 28 (28): 1299-1322, 2019

87 Wang, L., "A mechanism-based spatiotemporal non-local constitutive formulation-for elastodynamics of composites" 128 : 105-116, 2019

88 Asadi, M. S., "A laboratory shear cell used for simulation of shear strength and asperity degradation of rough rock fractures" 46 (46): 683-699, 2013

89 Nowruzpour, M., "A derivative-free upscaled theory for analysis of defects" 122 : 89-501, 2019

90 Wang, Y., "A coupled thermo-mechanical bond-based peridynamics for simulating thermal cracking in rocks" 211 (211): 13-42, 2018

91 Ooi, L. H., "A constant normal stiffness direct shear device for static and cyclic loading" 10 (10): 3-12, 1987

92 Cho, N., "A clumped particle model for rock" 44 (44): 997-1010, 2007

93 Potyondy D. O., "A bonded-particle model for rock" 41 (41): 1329-1364, 2004

94 Asadi, M., "A bonded particle model simulation of shear strength and asperity degradation for rough rock fractures" 45 (45): 649-675, 2012

95 Wang, Y., "A 3-D conjugated bond-pair-based peridynamic formulation for initiation and propagation of cracks in brittle solids" 134 : 89-115, 2018

96 Kou, M., "3-D X-ray computed tomography on failure characteristics of rock-like materials under coupled hydro-mechanical loading" 104 : 102396-, 2019