RISS 학술연구정보서비스

검색

인기 검색어

    다국어 입력

    http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

    변환된 중국어를 복사하여 사용하시면 됩니다.

    예시)
    • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
    • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
    닫기
    KCI등재

    방파제의 마루높이 산정을 위한 평균 월파량과 전달파고

    한글로보기

    https://www.riss.kr/link?id=A107409684

    • 0

      상세조회
    • 0

      다운로드
    서지정보 열기
    • 내보내기
    • 내책장담기
    • 공유하기
      • URL 복사
    • 오류접수
    인용문이 복사되었습니다.

    부가정보

    국문 초록 (Abstract) kakao i 다국어 번역

    전달파고와 허용 월파량을 함께 고려하여 방파제의 마루높이를 결정할 수 있는 방법을 제시하였다. 방파제를 형식별로 구분하여 현재 가장 일반적으로 사용되는 경험식들을 활용하여 입사파고와 평균 월파량 그리고 전달파의 관계를 정량적으로 해석하였다. 기존의 연구 결과와 비교하여 만족스럽게 검증되었으며, 임의의 입사파랑에 대하여도 적용할 수 있는 무차원 평균 월파량과 전달계수의 관계도 방파제 형식별로 제시, 비교하였다. 또한 주기 및 파고 변화에 따른 평균 월파량과 전달파고의 관계를 수립하여 허용 월파량을 산정할 수 있었다. 마지막으로 허용 월파량에 따른 상대 마루높이 결정방법을 경사제와 무공 케이슨식 혼성제에 적용하였다. 경사제와 혼성제 모두에서 허용 월파량이 커지면 상대 마루높이는 급격하게 작아지는 경향을 보였다. 특히 상대적으로 작은 범위에서는 허용 월파량이 동일해도 혼성제의 마루높이가 경사제의 마루높이보다 커야 하지만, 일정 수준 이상의 큰 허용 월파량에 대해서는 그 반대의 경향을 보였다. 혼성제의 경우는 월파량이 작아도 항내로 직접 낙하하여 상대적으로 큰 항내 전달파고를 유발하지만, 월파량이 일정 수준을 넘어서면 방파제의 형식에 따른 영향이 작아지면서 제체를 통한 투과파의 영향이 경사제에 고려되기 때문이다.
    번역하기

    전달파고와 허용 월파량을 함께 고려하여 방파제의 마루높이를 결정할 수 있는 방법을 제시하였다. 방파제를 형식별로 구분하여 현재 가장 일반적으로 사용되는 경험식들을 활용하여 입사...

    전달파고와 허용 월파량을 함께 고려하여 방파제의 마루높이를 결정할 수 있는 방법을 제시하였다. 방파제를 형식별로 구분하여 현재 가장 일반적으로 사용되는 경험식들을 활용하여 입사파고와 평균 월파량 그리고 전달파의 관계를 정량적으로 해석하였다. 기존의 연구 결과와 비교하여 만족스럽게 검증되었으며, 임의의 입사파랑에 대하여도 적용할 수 있는 무차원 평균 월파량과 전달계수의 관계도 방파제 형식별로 제시, 비교하였다. 또한 주기 및 파고 변화에 따른 평균 월파량과 전달파고의 관계를 수립하여 허용 월파량을 산정할 수 있었다. 마지막으로 허용 월파량에 따른 상대 마루높이 결정방법을 경사제와 무공 케이슨식 혼성제에 적용하였다. 경사제와 혼성제 모두에서 허용 월파량이 커지면 상대 마루높이는 급격하게 작아지는 경향을 보였다. 특히 상대적으로 작은 범위에서는 허용 월파량이 동일해도 혼성제의 마루높이가 경사제의 마루높이보다 커야 하지만, 일정 수준 이상의 큰 허용 월파량에 대해서는 그 반대의 경향을 보였다. 혼성제의 경우는 월파량이 작아도 항내로 직접 낙하하여 상대적으로 큰 항내 전달파고를 유발하지만, 월파량이 일정 수준을 넘어서면 방파제의 형식에 따른 영향이 작아지면서 제체를 통한 투과파의 영향이 경사제에 고려되기 때문이다.

    더보기

    다국어 초록 (Multilingual Abstract) kakao i 다국어 번역

    A method that can take into account the transmitted wave heights and the allowable overtopping discharges together has been presented in order to determine the crest freeboards of breakwaters. Thus, the relationships of the incident waves, mean overtopping discharges and the transmitted wave heights have been quantitatively analyzed by various empirical equations which have separately been used according to the types of breakwaters up to recently. The present results have been satisfactorily calibrated through the comparison with the previous results of EurOtop (2018) for the same condition. The relationships of dimensionless mean overtopping discharges and wave transmission coefficients for any incident waves have also been presented and compared them with the types of breakwaters. In addition, the allowable overtopping discharges can be evaluated from the combinations of the transmitted wave heights and the mean overtopping discharges with respect to the various periods and heights of incident waves. Finally, the method for determining the relative crest freeboards of breakwaters with the allowable overtopping discharges has been applied to both the rubble-mound breakwaters and the composite breakwaters. It has been found that the relative crest freeboards of breakwaters tend to be decreased sharply as the allowable overtopping discharges are increasing. In particular, the relative crest freeboards of composite breakwaters should be larger than those of the rubble-mound breakwaters under the condition of the same overtopping discharges in the small ranges, whereas the opposite trends can be shown for the allowable overtopping discharges in the large range over some amounts of level. This may be due to the effects of that the relatively larger transmitted wave heights can be induced by the direct impacts of the overtopping discharges to the harbors inside the composite breakwaters, while, in the rubble-mound breakwaters, the overtopping discharges are mildly transferred along the inside slopes of breakwaters. However, these effects seem to be neglected when the overtopping discharges become very large, the penetration effects may even be considered in the rubble-mound breakwaters instead.
    번역하기

    A method that can take into account the transmitted wave heights and the allowable overtopping discharges together has been presented in order to determine the crest freeboards of breakwaters. Thus, the relationships of the incident waves, mean overto...

    A method that can take into account the transmitted wave heights and the allowable overtopping discharges together has been presented in order to determine the crest freeboards of breakwaters. Thus, the relationships of the incident waves, mean overtopping discharges and the transmitted wave heights have been quantitatively analyzed by various empirical equations which have separately been used according to the types of breakwaters up to recently. The present results have been satisfactorily calibrated through the comparison with the previous results of EurOtop (2018) for the same condition. The relationships of dimensionless mean overtopping discharges and wave transmission coefficients for any incident waves have also been presented and compared them with the types of breakwaters. In addition, the allowable overtopping discharges can be evaluated from the combinations of the transmitted wave heights and the mean overtopping discharges with respect to the various periods and heights of incident waves. Finally, the method for determining the relative crest freeboards of breakwaters with the allowable overtopping discharges has been applied to both the rubble-mound breakwaters and the composite breakwaters. It has been found that the relative crest freeboards of breakwaters tend to be decreased sharply as the allowable overtopping discharges are increasing. In particular, the relative crest freeboards of composite breakwaters should be larger than those of the rubble-mound breakwaters under the condition of the same overtopping discharges in the small ranges, whereas the opposite trends can be shown for the allowable overtopping discharges in the large range over some amounts of level. This may be due to the effects of that the relatively larger transmitted wave heights can be induced by the direct impacts of the overtopping discharges to the harbors inside the composite breakwaters, while, in the rubble-mound breakwaters, the overtopping discharges are mildly transferred along the inside slopes of breakwaters. However, these effects seem to be neglected when the overtopping discharges become very large, the penetration effects may even be considered in the rubble-mound breakwaters instead.

    더보기

    목차 (Table of Contents)

    • 요지
    • Abstract
    • 1. 서론
    • 2. 평균 월파량 산정식
    • 3. 전달계수 산정식
    • 요지
    • Abstract
    • 1. 서론
    • 2. 평균 월파량 산정식
    • 3. 전달계수 산정식
    • 4. 평균 월파량에 따른 전달파고 해석
    • 5. 결론
    • References
    더보기

    참고문헌 (Reference)

    1 이철응, "직립식 방파제의 마루높이 산정을 위한 최대월파량에 대한 신뢰성 해석" 한국해안,해양공학회 23 (23): 154-162, 2011

    2 이철응, "월파에 대한 경사식 해안 구조물의 신뢰성 해석" 한국해안,해양공학회 15 (15): 214-223, 2003

    3 Alberti, P., "Wave transmission behind vertical walls due to overtopping, Breakwaters, Coastal Structures and Coastline" 2001

    4 Daemen, I. F., "Wave Transmission at Low-Crested Breakwaters" Delft University of Technology 1991

    5 Seelig, W. N., "Two-dimensional tests of wave transmission and reflection characteristics of laboratory breakwaters" U.S. Army Engineer Waterways Experiment Station 1980

    6 Rock Manual, "The use of rock in hydraulic engineering"

    7 MOF (Ministry of Oceans and Fisheries), "Technical design standards and commentaries for ports and harbors in Korea"

    8 Tanimoto, K., "Structures and Hydraulic Characteristics of Breakwaters - The State of the Art of Breakwater Design in Japan" 26 (26): 11-15, 1987

    9 van der Meer, J. W., "Rock Slopes and Gravel Beaches Under Wave Attack" Delft University of Technology 1988

    10 이철응, "Reliability Analysis and Evaluation of Partial Safety Factors for Random Wave Overtopping" 대한토목학회 13 (13): 7-14, 2009

    1 이철응, "직립식 방파제의 마루높이 산정을 위한 최대월파량에 대한 신뢰성 해석" 한국해안,해양공학회 23 (23): 154-162, 2011

    2 이철응, "월파에 대한 경사식 해안 구조물의 신뢰성 해석" 한국해안,해양공학회 15 (15): 214-223, 2003

    3 Alberti, P., "Wave transmission behind vertical walls due to overtopping, Breakwaters, Coastal Structures and Coastline" 2001

    4 Daemen, I. F., "Wave Transmission at Low-Crested Breakwaters" Delft University of Technology 1991

    5 Seelig, W. N., "Two-dimensional tests of wave transmission and reflection characteristics of laboratory breakwaters" U.S. Army Engineer Waterways Experiment Station 1980

    6 Rock Manual, "The use of rock in hydraulic engineering"

    7 MOF (Ministry of Oceans and Fisheries), "Technical design standards and commentaries for ports and harbors in Korea"

    8 Tanimoto, K., "Structures and Hydraulic Characteristics of Breakwaters - The State of the Art of Breakwater Design in Japan" 26 (26): 11-15, 1987

    9 van der Meer, J. W., "Rock Slopes and Gravel Beaches Under Wave Attack" Delft University of Technology 1988

    10 이철응, "Reliability Analysis and Evaluation of Partial Safety Factors for Random Wave Overtopping" 대한토목학회 13 (13): 7-14, 2009

    11 Goda, Y., "Random seas and design of maritime structures" World Scientific Publishing Co 2000

    12 Goda, Y., "Random seas and design of maritime structures" World Scientific Publishing Co 2010

    13 EurOtop, "Manual on wave overtopping of sea defences and related structures" London 2018

    14 Powell, K.A., "Low-crest breakwaters, hydraulic performance and stability" Hydraulic Research Station 1985

    15 EurOtop, "European manual for the assessment of wave overtopping" Die Kuste 73-, 2007

    16 Viet, N. D., "Conceptual design for the breakwater system of the south of Doson naval base: Optimization versus deterministic design" 2008

    17 CEM, "Coastal Engineering Manual"

    18 Ahrens, J. P., "Characteristics of Reef Breakwaters" U.S. Army Engineer Waterways Experiment Station 1987

    더보기

    동일학술지(권/호) 다른 논문

    동일학술지 더보기

    더보기

    분석정보

    View

    상세정보조회

    0

    Usage

    원문다운로드

    0

    대출신청

    0

    복사신청

    0

    EDDS신청

    0

    동일 주제 내 활용도 TOP

    더보기

    주제

    연도별 연구동향

    연도별 활용동향

    연관논문

    연구자 네트워크맵

    공동연구자 (7)

    유사연구자 (20) 활용도상위20명

    인용정보 인용지수 설명보기

    학술지 이력

    학술지 이력
    연월일 이력구분 이력상세 등재구분
    2027 평가 재인증평가 신청대상 (재인증)
    2021-01-01 등재 등재학술지 유지 (재인증) KCI등재
    2018-01-01 등재 등재학술지 유지 (등재유지) KCI등재
    2015-01-01 등재 등재학술지 유지 (등재유지) KCI등재
    2011-01-01 등재 등재학술지 유지 (등재유지) KCI등재
    2009-01-01 등재 등재학술지 유지 (등재유지) KCI등재
    2008-02-20 학술지명변경 한글명 : 한국해안,해양공학회지 -> 한국해안·해양공학회논문집 KCI등재
    2007-01-01 등재 등재학술지 유지 (등재유지) KCI등재
    2005-01-01 등재 등재학술지 유지 (등재유지) KCI등재
    2002-07-01 등재 등재학술지 선정 (등재후보2차) KCI등재
    2000-01-01 등재 등재후보학술지 선정 (신규평가) KCI등재후보
    더보기

    학술지 인용정보

    학술지 인용정보
    기준연도 WOS-KCI 통합IF(2년) KCIF(2년) KCIF(3년)
    2016 0.53 0.53 0.5
    KCIF(4년) KCIF(5년) 중심성지수(3년) 즉시성지수
    0.47 0.47 0.608 0.29
    더보기
    해외이동버튼