저압 환경에서의 공력시험을 위한 폐쇄형 소형 풍동의 설계 파라미터 분석 및 전산 해석

다국어 초록 (Multilingual Abstract)

Design parameters for wind tunnel facility aimed for low pressure aerodynamic testings was investigated by two dimensional numerical simulation using a Fluent software. The number of corner vanes before the contraction part showed the most noticeable changes in the flow uniformity at the test section. With 20 corner vanes, span-wise symmetry became worse as the length ratio of the contraction part decreased, while the velocity distribution exhibited the best uniformity when the length ratio was 40%. As the diverging angle of the divergent part after the fan decreased from 3 degree to 2 degree, the flow uniformity was degraded. It turned out that a density change due to the altitude change does not affect the boundary layer profile.

참고문헌 (Reference)

1 김장권, "수축부 형상에 따른 풍동 내부유동장 특성에 대한 수치해석" 한국동력기계공학회 21 (21): 5-12, 2017

2 Batchelor, G.K., "Theory of Homogeneous Turbulence" Cambridge U. P. 1953

3 Son, M.H., "The Flow Quality Analysis for KAFA Subsonic Wind Tunnel" 31 : 323-362, 1992

4 Bradshaw, P., "The Design of Low-Speed Wind Tunnels" 5 : 1-59, 1964

5 Moonen, P., "Numerical modeling of the flow conditions in a closed circuit low-speed wind tunnel" 94 : 699-723, 2006

6 Barlow, J.B., "Low Speed Wind Tunnel Testing" John wiley and sons 1999

7 Cattafesta, L., "Encyclopedia of Aerospace Engineering" 2010

8 Uberoi, M.S., "Effect of Wind-Tunnel Contraction on Free Stream Turbulence" 23 (23): 754-764, 1956

9 Morel, T., "Comprehensive Design of Axisymmetric Wind Tunnel Contractions" 97 : 225-233, 1975

10 Calautit, J.K., "A validated design methodology for a closed-loop subsonic wind tunnel" 125 : 180-194, 2014