공기흡입 엔진 부품의 고온 분출냉각 시험장치에서의 엔탈피값을 구하기 위하여, 시험부 유동에 대한 이론적 계산 및 측정을 수행하였다. 열평형 및 음속유동 방법에 의해 계산된 질량평균 ...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A60156123
2011
Korean
학술저널
224-227(4쪽)
0
상세조회0
다운로드국문 초록 (Abstract)
공기흡입 엔진 부품의 고온 분출냉각 시험장치에서의 엔탈피값을 구하기 위하여, 시험부 유동에 대한 이론적 계산 및 측정을 수행하였다. 열평형 및 음속유동 방법에 의해 계산된 질량평균 ...
공기흡입 엔진 부품의 고온 분출냉각 시험장치에서의 엔탈피값을 구하기 위하여, 시험부 유동에 대한 이론적 계산 및 측정을 수행하였다. 열평형 및 음속유동 방법에 의해 계산된 질량평균 엔탈피 값은 10 MJ/kg 이며, 슬러그형 구리 열량계를 사용하여 측정된 유동 중심에서의 엔탈피 값은 15MJ/kg이었다. 일반적으로, 유동 중심 대 질량평균 엔탈피 비의 범위는 1.4에서 4이다. 본 시험장치는 고온 분출냉각 시험에 효과적인 낮은 엔탈피 구배를 갖는 것으로 나타났다.
다국어 초록 (Multilingual Abstract)
In order to determine the enthalpy profile in the high temperature transpiration cooling test facility for the air-breating engine compartments, theoretical calculation and measurement for the flow of the test section are performed. The mass averaged ...
In order to determine the enthalpy profile in the high temperature transpiration cooling test facility for the air-breating engine compartments, theoretical calculation and measurement for the flow of the test section are performed. The mass averaged enthalpy value determined by the heat balance and sonic throat methods is 10 MJ/kg. The centerline enthalpy value measured using the slug type copper calorimeter is 15 MJ/kg. Typically, the ratio of centerline and mass averaged enthalpy should be varies from 1.4 to 4. This facility has lower bound of enthalpy profile. It will be effective in testing of high temperature transpiration cooling.
목차 (Table of Contents)
한국형발사체(KSLV-II) 추진기관 시험설비 배치 및 설계