Ethylene glycol에 의해 액화된 폐지로부터 polyester 제조

다국어 초록 (Multilingual Abstract)

Polyester was prepared through the esterification reaction between watsepaper liquefied by ethylene glycol and carboxylic acid. Liquefaction was carried out at the previously determined condition of 100 minutes, 160℃, and 3% sulfuric acid, and the hydroxyl value of the liquefied product was 411 mg KOH/g. In order to remove bubbles produced during the curing step, the method to introduce a slight nitrogen stream into reaction vessel and/or the method to preheat a polyester film at 85℃ before curing step were used alone or in combination. But if curing temperature was 130℃, simple method to cure a film for 5 hours at 130℃ without using both methods was found to be most effective. The polyesters prepared with various carboxylic acids showed significant different physical properties, and maleic acid was best among them. Also, the effect of reaction time and temperature, C/H (carboxyl group/hydroxyl group) ratio, and type of additive on the crosslinkage of polyester was investigated. Lithium hydroxide or citric acid as additive was used to enhance the crosslinkage of polyester and citric acid was proved to be much more effective than lithium hydroxide. The effect of reaction temperature on the crosslinkage was marginal, but the crosslinkage decreased above 130℃. The crosslinkage was 86% when the polyester was prepared at an optimum condition such as 130℃ and 15 minutes of reaction condition, 1.5 of C/H ratio, 130℃ and 5 hours of curing condition, and 10% addition of citric acid.

목차 (Table of Contents)

• Abstract
• 1. 서론
• 2. 재료 및 방법
• 3. 결과 및 고찰
• 4. 결론
• References

참고문헌 (Reference)

1 Kurimoto, Y, "Wood species effects on the characteristics of liquefied wood and the properties of polyurethane films prepared from the liquefied wood" 21 : 381-390, 2001

2 Sanchez, Q. J, "Trends in biotechnological production of fuel ethanol from different feedstocks" 99 : 5270-5295, 2008

3 Nicholson, J. W, "The Chemistry of Polymers" Royal Society of chemistry 59-61, 2006

4 Yu, F, "Reaction kinetics of stover liquefaction in recycled stover polyol" 130 : 563-573, 2006

5 Yamada, T, "Rapid liquefaction of lignocellulosic waste by using ethylene carbonate" 70 : 61-67, 1999

6 Kurimoto, Y, "Network structures and thermal properties of polyurethane films prepared from liquefied wood" 77 : 33-40, 2001

7 Kunaver, M, "Liquefaction of wood, synthesis and characterization of liquefied wood polyester derivatives" 115 : 1265-1271, 2010

8 Wang, Y., "Liquefaction of corn stover using industrial biodiesel glycerol" 2 : 32-40, 2009

9 Yu, F, "Liquefaction of corn stover and preparation of polyester from liquefied polyol" 130 : 574-585, 2006

10 Hae Joong Shin, "Kinetic Study of Recycled Newspaper Liquefaction in Polyol Solvent" 한국생물공학회 14 (14): 349-353, 2009

11 Xie, T, "Fast liquefaction of bagasse in ethylene carbonate and preparation of epoxy resin from the liquefied product" 98 : 1961-1968, 2005

12 이동헌, "Ethylene glycol을 사용한 폐지의 액화 및 액화물로부터 polyester 제조" 한국생물공학회 25 (25): 251-256, 2010

13 Shiraishi, N, "Dissolution of etherified or esterified wood into polyhydric alcohols or bisphenol A and their application in preparing wooden polymeric materials" 31 : 418-420, 1985

14 Allcock, H. R, "Contemporary Polymer Chemistry" Prentice Hall, Englewood Cliffs 258-269, 1981

15 Yao, Y., "Combined liquefaction of wood and starch in a polyethylene glycol/glycerin blended solvent" 39 : 930-938, 1993

16 이승환, "Biodegradable polyurethane foam from liquefied waste paper and its thermal stability, biodegradability, and genotoxicity" JOHN WILEY SONS INC 83 (83): 1482-1489, 200202