球狀黑鉛鑄鐵鑄物의 큰 결함은 shrinkage cavity발생이다. 이것의 원인은 凝固時의 膨脹力에 의한 것이라고 생각되므로 이것을 측정하였다. 이 실험을 통하여 얻은 결론은 다음과 같다. (1) 球...

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A3231045
1975
Korean
436
KCI등재
학술저널
240-246(7쪽)
0
상세조회0
다운로드球狀黑鉛鑄鐵鑄物의 큰 결함은 shrinkage cavity발생이다. 이것의 원인은 凝固時의 膨脹力에 의한 것이라고 생각되므로 이것을 측정하였다. 이 실험을 통하여 얻은 결론은 다음과 같다. (1) 球...
球狀黑鉛鑄鐵鑄物의 큰 결함은 shrinkage cavity발생이다. 이것의 원인은 凝固時의 膨脹力에 의한 것이라고 생각되므로 이것을 측정하였다.
이 실험을 통하여 얻은 결론은 다음과 같다.
(1) 球狀黑鉛鑄鐵의 凝固時에 발생하는 최고 膨脹力은 36∼37kgw이다(X方向의 分力)
(2) 過共晶組成 球狀黑鉛鑄鐵의 共晶反應에 의한 膨脹力增加率 df/dr는 167gw/sec이다.
다국어 초록 (Multilingual Abstract)
The formation of shrinkage cavities during solidification is a serious defect in the spheroidal graphite cast iron castings. It is considered that the shrinkage cavities are formed as a result of the expansion force of spheroidal graphite cast iron du...
The formation of shrinkage cavities during solidification is a serious defect in the spheroidal graphite cast iron castings. It is considered that the shrinkage cavities are formed as a result of the expansion force of spheroidal graphite cast iron during solidification, and the force was measured.
The results obtained through this experiment are as follows:
1. The highest force during the solidification in the spheroidal graphite cast iron is 36-37kgw (X component of the force)
2. The force increasing gradient df/dt, in the spheroidal graphite cast iron of hyper eutectic composition is 167gw/sec. when eutectic reaction es occres
About the manufacturing process and the characteristics (mainly the toughness) of the tool steel
고체전해질을 이용한 Oxygen-Sensor 와 그의 응용에 대하여
Calcium-Orthosilicate 를 이용한 자경성 주형의 상온성질에 관하여
Zirconium base 다성분 합금계에 있어 수소의 용해도에 미치는 합금 원소의 영향