인장과 휨을 동시에 받는 프리스트레스 강선의 굴절인장성능 평가 = Numerical study on wire strength under both tension and deflection for use as prestressing steel

다국어 초록 (Multilingual Abstract)

The prestressing steel wire, which is applied a tension to reinforce the structure, is applied flexure simultaneously by the duct and the deviator. In order to evaluate the deflected tensile performance of the prestressing steel wire subjected to both tensile and flexural stresses, the numerical analysis for 600 cases with variables of wire diameters, mandrel diameters, and friction coefficient between mandrel and steel wire was performed. As the result of analysis, the larger the diameter of the steel wire was, the lower the deflected tensile performance was, and the effect decreased with the increase of the wire elongation. The effect of mandrel diameter and friction coefficient between mandrel and wire on the deflected tensile performance of the wire was very small. But the deflected tensile performance and the friction coefficient between mandrel and strand showed a relatively high correlation. Therefore, it is necessary to make enough large elongation to secure the deflected tensile performance. If there is a restriction on the elongation, it is necessary to reduce the diameter of the steel wire to an appropriate value, and to increase the friction between steel wires by adjusting the surface condition of the steel wire.

국문 초록 (Abstract)

구조물의 보강을 위해 프리스트레스 강선에는 인장력이 도입되는데 이 강선은 덕트 및 편향장치에 의해서 휨을 동시에 받게 된다. 이와 같이 인장과 휨을 동시에 받는 프리스트레스 강선의 굴절인장성능을 평가하기 위해 강선의 직경, 맨드럴 직경, 맨드럴과 강선 사이 마찰계수를 변수로 하여 총 600종에 대한 굴절인장 변수해석을 실시하였다. 해석 결과, 강선의 직경이 클수록 낮은 굴절인장성능을 나타내었고, 그 영향은 강선 연신율의 증가에 따라 감소하였다. 강선의 굴절인장성능에 대한 맨드럴 직경, 맨드럴-강선 간 마찰계수의 영향은 매우 작게 나타났지만, 맨드럴-강연선 간 마찰계수에 대한 추가 해석 결과 상대적으로 높은 상관성을 보였다. 따라서, 굴절인장성능 확보를 위해서는 충분한 연신율 확보가 우선되어야 하고, 연신율 확보에 제약이 있을 시 적정값까지 강선 직경을 감소시켜야 하겠으며, 강선의 표면조건을 조절하여 강선 간 마찰력을 높여야 할 것이다.

참고문헌 (Reference)

1 fib, "fib Bulletin 30 Acceptance of stay cable systems using prestressing steels"

2 Tanaka, S., "Recent development of epoxy coated and filled prestressing strand and behavior upon a wire break" Springer International Publishing 284-293, 2017

3 PTI, "PTI DC45.1 Recommendations for stay-cable design, testing and installation"

4 김진국, "Mechanical Properties of a New Prestressing Strand with Ultimate Strength of 2160 MPa" 대한토목학회 18 (18): 607-615, 2014

5 KS, "KS D7002 Uncoated stress-relieved steel wires and strands for prestressed concrete"

6 ISO, "ISO 6934-4 Steel for the prestressing of concrete - Part 4: Strand"

7 ISO, "ISO 15630-3 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel"

8 Oshima, K., "Highly durable ultra-high Strength prestressing strand system with large diameter" 82 : 89-95, 2016

9 EN, "FprEN 10138-3 Prestressing steels - Part 3: Strand"

10 FIP, "FIP Commission 2 FIP recommendations - Deflected tensile test"

11 Kim, J.K., "Effect of design variables on deflected tensile performance of high-strength 7-wire steel strand for stay cable" 188 : 40-48, 2018

12 Tadolini, S. C., "Characterization of tensile and shear loading on indented PC-strand cable bolts" 26 (26): 89-95, 2016

13 Hayashi, Y., "Characteristics of developed high-strength prestressing strand" 2013

14 ASTM, "ASTM A416 Standard specification for low-relaxation, seven-wire steel strand for prestressed concrete"

15 ABAQUS, "ABAQUS/CAE user's manual, Ver.6.12" Hibbitt, Karlsson and Sorenson, Inc. 2000