Properties of ABS/PMMA Binary Blend and ABS/PMMA/MBS Ternary Blend = Influence of Rubber Particle Size

다국어 초록 (Multilingual Abstract)

An analysis was performed on the effects of rubber particle size on the mechanical and optical properties of the acrylonitrile-butadiene-styrene (ABS)/poly(methyl methacrylate) (PMMA) blend and the ABS/PMMA/methacrylate-butadiene-styrene (MBS) blend. This work found that when the particle size is 0.22-0.23 μm, the impact strength value of the ABS/PMMA blend is at its maximum and is the same as that of the ABS/PMMA/MBS blend. The optimum particle size is effective in toughening because it can trigger the shear yielding mechanism of the matrix. The miscibility and surface glossiness of the blends with 0.22 μm particle size were also much better than those of the blends with other particle sizes. This work provides new insights into the synergistic roles of rubber particle size and core-shell modifier in the toughening of ABS/PMMA blend with good impact toughness and high surface glossiness.

목차 (Table of Contents)

• Abstract
• Introduction
• Experimental
• Results and Discussion
• Conclusions
• References

참고문헌 (Reference)

1 A. M. Zhang, 31 : 1593-, 2010

2 Y. Ping, 31 : 50-, 2015

3 B. K. Kim, 35 : 829-, 1996

4 S. H. Wang, 62 : 1-, 2014

5 B. K. Kim, 66 : 1531-, 1997

6 A. M. Zhang, 49 : 296-, 2010

7 J. Rybnicek, 57 : 87-, 2012

8 N. Tayebe, 126 : 1637-, 2012

9 S. H. Wang, 496-500 : 322-, 2014

10 S. H. Wang, 496-500 : 327-, 2014

11 C. Zhou, 52 : 2523-, 2012

12 L. Ren, 25 : 273-, 2014

13 S. Sun, 116 : 2451-, 2010

14 M. Chen, 52 : 814-, 2013

15 A. M. Zhang, 132 : 1-, 2015

16 I. Fortelny, 41 : 6865-, 2000

17 C. B. Bucknall, 50 : 5539-, 2009

18 D. Dompas, 35 : 4743-, 1994

19 S. Wu, 26 : 1855-, 1985

20 R. A. Pearson, 26 : 3828-, 1991

21 C. B. Bucknall, 29 : 3377-, 1994

22 O. K. Muratoglu, 36 : 921-, 1995

23 D. S. Ayre, 39 : 4785-, 1998

24 H. G. Jeoung, 25 : 744-, 2001

25 S. Y. Fu, 39 : 933-, 2008

26 B. Lauke, 68 : 3365-, 2008

27 S. Wu, 30 : 753-, 1990

28 H. T. Oyama, 50 : 747-, 2009

29 Z. K. Marwat, 66 : 520-, 2015

30 G. N. Kumaraswamy, 42 : 2655-, 2006

31 양경모, "폴리(메틸 메타아크릴레이트) 입자 크기 및 분자량 제어에 따른 의치상 재료로서의 기계적 물성 변화" 한국고분자학회 27 (27): 493-501, 2003

32 S. H. Jin, "U.S. Patent 0,281,603"

33 Guang Feng Wu, "Properties of Poly(vinyl chloride)/PB-g-PMMA Composites" 한국고분자학회 39 (39): 809-813, 2015

34 Yu Fan, "Dynamic Rheological Behavior, Processability and Mechanical Properties of PVC/Butyl Acrylate-grafted-Methyl Methacrylate/Styrene Blends" 한국고분자학회 39 (39): 852-859, 2015