Aluminum or Its Alloy Matrix Hybrid Nanocomposites

다국어 초록 (Multilingual Abstract)

Aluminum or its alloys are widely used in automobile, aerospace, and marine due to their low density, good ductility, low cost,corrosion resistance etc. However, aluminum has several pit falls viz. poor strength, abrasion and wear resistance etc. Thesepit fall of aluminum can be improve by reinforcement of nanomaterials in the pure metal or alloy. Various types of nanomaterials can be used for the fabrication of light-weight aluminum/alloy matrix nanocomposites for high specifc strength,improved wear and abrasion property, better corrosion resistance etc. Recently, there is a signifcant research interest for thefabrication of nanocomposites by using more than one reinforcing materials. This article presents an overview of variousreinforcement materials used for the fabrication of aluminum or its alloy matrix based hybrid nanocomposites. Brief overview of metal matrix and specifcally aluminum matrix nanocomposites are included in the manuscript. Various processingroutes for the fabrication of hybrid nanocomposites are explained. Properties of hybrid nanocomposites with respect to thenano-reinforcement types, reinforcement concentration, morphology and microstructure are discussed. Further, potentialapplications and future trends of aluminum or its alloy matrix hybrid nanocomposites are presented. Finally, the article hasbeen concluded with several future scopes of research in the area of aluminum/alloy matrix based hybrid nanocomposites.

참고문헌 (Reference)

1 S. K. Thandalam, "microstructural and mechanical properties of ex situ zircon particles(ZrSiO4)reinforced Metal Matrix Composites(MMCs) : a review" 4 (4): 333-347, 2015

2 H. R. Ezatpour, "mechanical analysis and optimal selection of 7075 aluminum alloy based composite reinforced with alumina nanoparticles" 178 : 119-127, 2016

3 M. Sharma, "and thermal expansion properties of a carbon nanotube-reinforced aluminum nanocomposite" 23 (23): 222-233, 2016

4 P. Balamurugan, "Wear studies of copper-fy ash composite under dry sliding conditions" 6 (6): 1065d5-, 2019

5 X. Zeng, "Wear characteristics of hybrid aluminum-matrix composites reinforced with well-dispersed reduced graphene oxide nanosheets and silicon carbide particulates" 155 : 364-375, 2018

6 E. M. Sharif, "Wear behavior of aluminum matrix hybrid nanocomposites fabricated by powder metallurgy" 271 (271): 1072-1079, 2011

7 P. Farhadipour, "Using warm accumulative roll bonding method to produce Al–Al2O3 metal matrix composite" 231 (231): 889-896, 2017

8 H. Dieringa, "Ultrasound assisted casting of an AM60based metal matrix nanocomposite, its properties, and recyclability" 7 (7): 388-, 2017

9 A. P. Reddy, "Two-body abrasive wear behaviour of AA6061-2SiC-2Gr hybrid nanocomposite fabricated through ultrasonically assisted stir casting" 53 (53): 2165-2180, 2019

10 S. Basavarajappa, "Turning of particulate metal matrix composites—review and discussion" 220 (220): 1189-1204, 2006

11 A. M. Khorasani, "Titanium in biomedical applications-properties and fabrication : a review" 5 (5): 593-619, 2015

12 M. S. Ahmadvand, "Thermomechanical synthesis of hybrid in-situ Al-(Al3Ti+Al2O3)composites through nanoscale Al-Al2TiO5 reactive system" 789 : 493-505, 2019

13 U. Cavdar, "The effect of sintering on the microstructure, hardness, and tribological behavior of aluminum-graphene nanoplatelet powder composites" 57 (57): 265-271, 2018

14 H. R. Ezatpour, "The effect of Al2O3-nanoparticles as the reinforcement additive on the hot deformation behavior of 7075 aluminum alloy" 88 : 1049-1056, 2015

15 T. Laha, "Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming" 40 (40): 589-594, 2009

16 J. Kim, "Tensile fracture behavior and characterization of ceramic matrix composites" 12 (12): 2997-, 2019

17 M. Ahmadi, "Synthesis, mechanical properties and wear behavior of hybrid Al/(TiO2 + CuO) nanocomposites" 769 : 713-724, 2018

18 H. S. Vaziri, "Synthesis of nanoalumina/graphene oxide hybrid for improvement tribological property of aluminum" 72 (72): 1687-1695, 2019

19 N. Radhika, "Synthesis of Cu-10Sn/SiC metal matrix composites and experimental investigation of its adhesive wear behaviour" 11 (11): 345-354, 2019

20 M. Shayan, "Synthesis of AA2024-(SiO2np + TiO2np)hybrid nanocomposite via stir casting process" 756 : 484-491, 2019

21 H. Tazari, "Synthesis and mechanical properties of aluminum alloy 5083/SiCnp nanocomposites" 729 : 960-969, 2017

22 M. Leparoux et al., "Solid state processing of aluminum matrix composites reinforced with nanoparticulate materials" 20 (20): 1800401-, 2018

23 J. M. Mistry, "Research review of diversifed reinforcement on aluminum metal matrix composites : fabrication processes and mechanical characterization" 25 (25): 633-647, 2018

24 X. Zhang et al., "Regulation of interface between carbon nanotubes-aluminum and its strengthening effect in CNTs reinforced aluminum matrix nanocomposites" 155 : 686-696, 2019

25 M. Nazari, "Production and characterization of an advanced AA6061-Graphene-TiB2hybrid surface nanocomposite by multi-pass friction stir processing" 377 : 124914-, 2019

26 S. Ahmadifard, "Production and characterization of A5083-Al2O3-TiO2 hybrid surface nanocomposite by friction stir processing" 232 (232): 287-293, 2018

27 H. Su, "Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix composites" 36 : 590-596, 2012

28 L. Poovazhagan, "Processing and performance characteristics of aluminum-nano boron carbide metal matrix nanocomposites" 31 (31): 1275-1285, 2016

29 E. I. Salama, "Preparation and properties of dual-matrix carbon nanotube-reinforced aluminum composites" 99 : 84-93, 2017

30 Y. V. Petukhova, "Polymer composites containing dispersed VO2 of various polymorphs : Effects of polymer matrix on functional properties" 235 : 121752-, 2019

31 A. Schmidt, "Particle-reinforced aluminum matrix composites (AMCs)-selected results of an integrated technology, user, and market analysis and forecast" 8 (8): 143-, 2018

32 G.J. Kipouros, "On the advantages of using powder metallurgy in new light metal alloy design" 37A (37A): 3429-3436, 2006

33 A. Heidarpour, "On the Al5083-Al2O3-TiO2 hybrid surface nanocomposite produced by friction stir processing" 54 (54): 409-415, 2018

34 F. Ostovan et al., "Nanomechanical behavior of multi-walled carbon nanotubes particulate reinforced aluminum nanocomposites prepared by ball milling" 9 (9): 140-, 2016

35 A. Mazahery, "Nano-sized silicon carbide reinforced commercial casting aluminum alloy matrix : experimental and novel modeling evaluation" 217 : 558-565, 2012

36 S. Arif, "Morphological characterization, statistical modelling and tribological behaviour of aluminum hybrid nanocomposites reinforced with micro-nanosilicon carbide" 7 (7): 434-448, 2019

37 K. Song, "Mixing studies of aluminum and CNT powders in the process of nanocomposite fabrication" 563-569, 2008

38 S. F. Hassan, "Microwave sintered magnesium nanocomposites : hybrid(Y2O3+Ni)nano-size reinforcement and tensile properties" 25 (25): 103-107, 2016

39 M. Li et al., "Microstructure evolution and properties of graphene nanoplatelets reinforced aluminum matrix composites" 140 : 172-178, 2018

40 X. M. Du, "Microstructure and mechanical properties of graphene-reinfroced aluminum-matrix composites" 52 (52): 763-768, 2018

41 R. Harichandran, "Microstructure and mechanical characterization of(B4C+ h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting" 144 : 814-826, 2018

42 M.F. Ahmadipour, "Microstructural evaluation and mechanical properties of Al1050/TiO2-graphite hybrid nanocomposite produced via friction stir processing" 50A (50A): 2443-2461, 2019

43 S. Simoes, "Microstructural characterization of aluminum-carbon nanotube nanocomposites produced using diferent dispersion methods" 22 (22): 725-732, 2016

44 A. H. Adibpour, "Microstructural and tribological properties of A356 based surface hybrid composite produced by friction stir processing" 6 (6): 016501-, 2019

45 R. Casati, "Metal matrix composites reinforced by nano-particles-a review" 4 (4): 65-83, 2014

46 K. Choi, "Mechanical properties of aluminum-based nanocomposite reinforced with fullerenes" 24 : S47-S52, 2014

47 N. Khobragade, "Mechanical and electrical properties of copper-graphene nanocomposite fabricated by high pressure torsion" 776 : 123-132, 2019

48 M. Tayyebi, "Manufacturing of high-strength multilayered composite by accumulative roll bonding" 2020

49 D. S. Zhou, "Manufacture of nano-sized particle-reinforced metal matrix composites : a review" 27 (27): 798-805, 2014

50 S. F. Hassan, "Magnesium nanocomposite : increasing copperisation effect on high temperature tensile properties" 59 (59): 66-72, 2016

51 S. F. Hassan, "Magnesium nanocomposite : effect of melt dispersion of diferent oxides nano particles" 31 (31): 100-108, 2016

52 A. Dey, "Magnesium metal matrix composites—a review" 42 (42): 58-67, 2015

53 C. Kannan, "Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under diferent machining environments" 33 (33): 587-595, 2018

54 S. Rathee, "Issues and strategies in composite fabrication via friction stir processing : a review" 33 (33): 239-261, 2018

55 A. Mazahery, "Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites" 45 (45): 2579-2586, 2011

56 T. Laha, "Interfacial phenomena in thermally sprayed multiwalled carbon nanotube reinforced aluminum nanocomposite" 55 (55): 1059-1066, 2007

57 S. Sharma, "Infuence of tool rotation speeds on mechanical and morphological properties of friction stir processed nano hybrid composite of MWCNT-Graphene-AZ31 magnesium" 7 (7): 487-500, 2019

58 J. Bogucka, "Infuence of temperature of accumulative roll bonding on the microstructure and mechanical properties of AA5251aluminum alloy" 59 (59): 127-131, 2014

59 K. B. Nie, "Infuence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite" 36 : 199-205, 2012

60 W. W. Zhou, "In-situ characterization of interfacial shear strength in multi-walled carbon nanotube reinforced aluminum matrix composites" 106 : 37-47, 2016

61 A. Alizadeh, "In situ fabrication of AIAl2O3-TiB2 hybrid nanocomposite; evaluating the effect of TiO2 and B2O3 mechanical milling time on properties of composite created through vortex casting" 6 (6): 045037-, 2019

62 H.H. Kim, "Hot extrusion of A356 aluminum metal matrix composite with carbon nanotube/Al2O3hybrid reinforcement. Metallurg" 45A (45A): 2636-2645, 2014

63 A. Nieto, "Graphene reinforced metal and ceramic matrix composites : a review" 62 (62): 241-302, 2017

64 M. Arab, "Graphene nanoplatelet (GNP)-incorporated AZ31 magnesium nanocomposite: microstructural, mechanical and tribological properties" 66 (66): 156-, 2018

65 H. Eskandari, "Friction-stir processing of an AA8026-TiB2-Al2O3 hybrid nanocomposite : microstructural developments and mechanical properties" 660 : 84-96, 2016

66 T. R. Vijayaram, "Fabrication of fiber reinforced metal matrix composites by squeeze casting technology" 178 (178): 34-38, 2006

67 F. Ogawa, "Fabrication of carbon nanofber-reinforced aluminum matrix composites assisted by aluminum coating formed on nanofber surface by in situ chemical vapor deposition" 2 (2): 015601-, 2015

68 E. M. Sharif, "Fabrication of aluminum matrix hybrid nanocomposite by mechanical milling" 23 (23): 4825-4832, 2009

69 Z. D. Wang, "Fabrication of a nanocomposite from in situ iron nanoparticle reinforced copper alloy" 20 (20): 075605-, 2009

70 F. Ostovan, "Fabrication of Al5083 surface hybrid nanocomposite reinforced by CNTs and Al2O3 nanoparticles using friction stir processing" 54 (54): 1107-1117, 2020

71 X. Zhu, "Fabrication of 2014 aluminum matrix composites reinforced with untreated and carboxyl-functionalized carbon nanotubes" 674 : 145-152, 2016

72 A. M. K. Esawi, "Fabrication and properties of dispersed carbon nanotube-aluminum composites" 508 (508): 167-173, 2009

73 N. Nouri, "Fabrication and mechanical property prediction of carbon nanotube reinforced Aluminum nanocomposites" 34 : 1-14, 2012

74 S. Baazamat, "Fabrication and characteristic of Al-based hybrid nanocomposite reinforced with WO3 and SiC by accumulative roll bonding process" 653 : 39-46, 2015

75 P. Senthilkumar, "Evaluation of mechanical properties of hybrid Al7009 nanocomposite" Informa UK Limited 43 (43): 216-224, 2021

76 K. S. R. Raju, "Enhancement of the mechanical properties of an aluminum metal matrix nanocomposite by the hybridization technique" 5 (5): 241-249, 2016

77 H. G. P. Kumar et al., "Enhanced surface and mechanical properties of bioinspired nanolaminate graphene-aluminum alloy nanocomposites through laser shock processing for engineering applications" 16 : 81-89, 2018

78 C. J. Li et al., "Effects of sintering parameters on the microstructure and mechanical properties of carbon nanotubes reinforced aluminum matrix composites" 31 (31): 3757-3765, 2016

79 S. Kandemir, "Effects of TiB2 nanoparticle content on the microstructure and mechanical properties of aluminum matrix nanocomposites" 59 (59): 844-852, 2017

80 S. F. Hassan, "Effect of increasingly metallized hybrid reinforcement on the wear mechanisms of magnesium nanocomposite" 39 (39): 1101-1107, 2016

81 K. S. Tun, "Effect of heating rate during hybrid microwave sintering on the tensile properties of magnesium and Mg/Y2O3 nanocomposite" 466 (466): 140-145, 2008

82 S. Mosleh-Shirazi, "Effect of graphite content on the tribological behavior of Al/2SiC/Gr hybrid nano-composites processed via mechanical milling" 108 (108): 60-67, 2017

83 J. S. Zhang, "Effect of graphene on the tribolayer of aluminum matrix composite during dry sliding wear" 358 : 907-912, 2019

84 Y. Song, "Effect of carbon-fbre powder on friction and wear properties of coppermatrix composites" 36 (36): 92-99, 2020

85 A. D. Moghadam, "Effect of In-situ Processing Parameters on the Mechanical and Tribological Properties of Self-Lubricating Hybrid Aluminum Nanocomposites" 62 (62): 25-, 2016

86 I. Carneiro, "EBSD analysis of metal matrix nanocomposite microstructure produced by powder metallurgy" 9 (9): 878-, 2019

87 S. Rathee, "Distribution of reinforcement particles in surface composite fabrication via friction stir processing : suitable strategy" 33 (33): 262-269, 2018

88 N. K. Bhoi, "Developments in the aluminum metal matrix composites reinforced by micro/nano particles—a review" 54 (54): 813-833, 2020

89 G. L. Fan, "Development of fake powder metallurgy in fabricating metal matrix composites : a Review" 27 (27): 806-815, 2014

90 H. K. Issa, "Development of an aluminum/amorphous nano-SiO2 composite using powder metallurgy and hot extrusion processes" 43 (43): 14582-14592, 2017

91 M. M. Jalilvand, "Development of A356/Al2O3 + SiO2 surface hybrid nanocomposite by friction stir processing" 360 : 121-132, 2019

92 J. Hemanth, "Development and property evaluation of aluminum alloy reinforced with nano-ZrO2 metal matrix composites (NMMCs)" 507 (507): 110-113, 2009

93 L. K. Singh, "Comparing the strengthening efciency of multiwalled carbon nanotubes and graphene nanoplatelets in aluminum matrix" 356 : 1059-1076, 2019

94 Z. Y. Xu et al., "Carbon nanotube-reinforced aluminum matrix composites enhanced by grain refnement and in situ precipitation" 54 (54): 8655-8664, 2019

95 K. S. Munir, "Carbon nanotube reinforced titanium metal matrix composites prepared by powder metallurgy-a review" 40 (40): 38-55, 2015

96 S. R. Bakshi, "Carbon nanotube reinforced metal matrix composites—a review" 55 (55): 41-64, 2010

97 T. Laha, "Carbon nanotube reinforced aluminum nanocomposite via plasma and high velocity oxy-fuel spray forming" 7 (7): 515-524, 2007

98 H. Kwon, "Carbon nanofber reinforced aluminum matrix composite fabricated by combined process of spark plasma sintering and hot extrusion" 11 (11): 4119-4126, 2011

99 M. Maurya, "Assessment of the mechanical properties of aluminium metal matrix composite : a review" 38 (38): 267-298, 2019

100 J. X. Zhou, "As-cast magnesium AM60-based hybrid nanocomposite containing alumina fbres and nanoparticles : microstructure and tensile behavior" 740 : 305-314, 2019

101 P. Antil, "Analysis on effect of electroless coated SiCp on mechanical properties of polymer matrix composites" 37 (37): 787-794, 2019

102 S. G. Chen, "An analytical model for elastic modulus calculation of SiC whisker-reinforced hybrid metal matrix nanocomposite containing SiC nanoparticles" 767 : 632-641, 2018

103 B. V. Ramnath et al., "Aluminum metal matrix composites—a review" 38 (38): 55-60, 2014

104 S. T. Mavhungu, "Aluminum matrix composites for industrial use : advances and trends" 7 : 178-182, 2017

105 P. Garg, "Advance research progresses in aluminium matrix composites : manufacturing & applications" 8 (8): 4924-4939, 2019

106 S. M. Ghalehbandi, "Accumulative roll bonding-a review" 9 (9): 3627-, 2019

107 R. Arunachalam, "A review on the production of metal matrix composites through stir casting—furnace design, properties, challenges, and research opportunities" 42 : 213-245, 2019

108 G. Arora, "A review on monolithic and hybrid metalmatrix composites reinforced with industrial-agro wastes" 39 (39): 4819-4835, 2017

109 S. Rathee, "A review of recent progress in solid state fabrication of composites and functionally graded systems via friction stir processing" 43 (43): 334-366, 2018

110 D. S. Li, "A novel method for preparing and characterizing graphene nanoplatelets/aluminum nanocomposites" 11 (11): 1642-1650, 2018

111 H. Ramezanalizadeh, "A novel aluminum based nanocomposite with high strength and good ductility" 649 : 461-473, 2015