본 연구는 아말감 면에 광중합형 레진으로 교정용 브라켓을 접착시킬 경우, 광원의 차이(할로겐 광중합기와 light-emitting diode (LED) 광중합기)와 샌드블라스팅 표면처리 여부에 따른 접착제의 ...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A342876
2005
Korean
515.000
KCI등재,SCOPUS,SCIE
학술저널
443-450(8쪽)
0
0
상세조회0
다운로드국문 초록 (Abstract)
본 연구는 아말감 면에 광중합형 레진으로 교정용 브라켓을 접착시킬 경우, 광원의 차이(할로겐 광중합기와 light-emitting diode (LED) 광중합기)와 샌드블라스팅 표면처리 여부에 따른 접착제의 ...
본 연구는 아말감 면에 광중합형 레진으로 교정용 브라켓을 접착시킬 경우, 광원의 차이(할로겐 광중합기와 light-emitting diode (LED) 광중합기)와 샌드블라스팅 표면처리 여부에 따른 접착제의 전단결합강도를 비교하고자 시행되었다. 발거된 소구치 30개를 대조군으로 이용하였으며, 법랑질 표면을 산부식한 후 통상적인 방법으로 브라켓을 접착하였다. 60개의 다른 소구치에 아말감 충전을 하여 실험군으로 이용하였다. 두 군에서 할로겐 광중합기와 LED 광중합기를 이용하여 브라켓을 접착시키고 브라켓이 탈락될 때까지 힘을 가해 전단결합강도를 측정하였다. 실험 결과, 실험군의 전단결합강도는 약 3-5.5 MPa로 대조군(19MPa)보다 낮았다. 실험군에서 샌드블라스팅 표면처리를 한 경우, 할로겐 광중합기를 사용한 군이 LED 광중합기를 사용한 군보다 높은 전단결합강도를 보였으나 (p<0.05), 샌드블라스팅 표면처리를 하지 않은 경우에는 광원에 따라 전단결합강도에 차이를 보이지 않았다. (p>0.05). 할로겐 광중합 군과 LED 광중합 군 모두에서 샌드블라스팅 여부에 따른 전단결합강도에 통계적으로 유의한 차이가 없었다 (p>0.05). 아말감 면에 광중합형 레진을 이용하여 브라켓을 접착할 경우, 할로겐 광중합기와 LED 광중합기로 얻을 수 있는 접착제의 결합강도는 임상적으로 사용하기에는 낮게 나타나, 이의 증진 방법을 도모하기 위해 앞으로 더 많은 연구가 필요하리라 사료된다.
다국어 초록 (Multilingual Abstract)
This study was performed to compare the shear bond strength of orthodontic adhesive to amalgam according to different light sources (halogen-based light and light emitting diode (LED)) and amalgam surface treatments. Ninety extracted human premolars w...
This study was performed to compare the shear bond strength of orthodontic adhesive to amalgam according to different light sources (halogen-based light and light emitting diode (LED)) and amalgam surface treatments. Ninety extracted human premolars were randomly divided into 6 groups (4 experimental and 2 control groups) of 15 by light sources and surface treatments. Orthodontic brackets were bonded and shear bond strength was measured with an Instron universal testing machine. The findings were as follows: The bond strength of adhesive to amalgam surface was 3-5.5 MPa which was lower than that of acid-etched enamel (19 MPa) control. In the sandblasted amalgam surface, the shear bond strength of the halogen light group was higher than that of the LED group (p<0.05) but, in the non-treated amalgam surface, there was no significant difference in the shear bond strength according to the light sources (p>0.05). Within the same light source. sandblasting had no significant effect on the shear bond strength of the adhesive bonded to amalgam surface (p>0.05). there was no significant difference in shear bond strength according to the light sources in acid-etched enamel control groups. This results suggerst that there can be a limit in using light curing adhesives when brackets are bonded to an amalgam surface. Additional clinical studies are necessary before routine use of halogen light and LED light curing units can be recommended in bonding brackets to an amalgam surface.
참고문헌 (Reference)
1 "아말감 충전물의 크기와 표면 처리 방법에 따른 교정용 브라켓의 전단접착강도에 대한 연구" 31 : 381-91, 2001
2 "서울대학교 치과병원 교정과에 내원한 부정교합 환자의 최근 경향" 33 : 63-72, 2003
3 "브라켓 접착 시 광중합방식에 따른 전단결합강도와 파절양상" 2003
4 "The bond strength of panavia EX to air-abraded amalgam" 4 : 276-81, 1991
5 "Shear strength of brackets bonded to anterior and posterior teeth" 89 : 476-9, 1986
6 "Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparations" 86 : 315-9, 2001
7 "Recent advances in bonding to gold,amalgam,and porcelain" 23 : 661-75, 1993
8 "Procedures for applying adhesive resin The influence of dental non-precious alloy and the treatment of inner surface of metal to adhesion" 584-91,
9 "Polymerization of orthodontic resin cement with light-emitting diode curing units" 122 : 236-41, 2002
10 "Plasma arc light를 이용한 bracket 부착시의 전단 결합 강도와 파절 양상의 유형" 31 : 261-70, 2001
1 "아말감 충전물의 크기와 표면 처리 방법에 따른 교정용 브라켓의 전단접착강도에 대한 연구" 31 : 381-91, 2001
2 "서울대학교 치과병원 교정과에 내원한 부정교합 환자의 최근 경향" 33 : 63-72, 2003
3 "브라켓 접착 시 광중합방식에 따른 전단결합강도와 파절양상" 2003
4 "The bond strength of panavia EX to air-abraded amalgam" 4 : 276-81, 1991
5 "Shear strength of brackets bonded to anterior and posterior teeth" 89 : 476-9, 1986
6 "Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparations" 86 : 315-9, 2001
7 "Recent advances in bonding to gold,amalgam,and porcelain" 23 : 661-75, 1993
8 "Procedures for applying adhesive resin The influence of dental non-precious alloy and the treatment of inner surface of metal to adhesion" 584-91,
9 "Polymerization of orthodontic resin cement with light-emitting diode curing units" 122 : 236-41, 2002
10 "Plasma arc light를 이용한 bracket 부착시의 전단 결합 강도와 파절 양상의 유형" 31 : 261-70, 2001
11 "Plasma arc curing lights for orthodontic bonding" 122 : 643-8, 2002
12 "Light and setting times of visible light-cured orthodontic adhesive" 29 : 31-6, 1995
13 "Improving orthodontic bonding to siver amalgam and spherical amalgam with different intermediate resins" 337-44, 1998
14 "Improving orthodontic bonding to silver amalgam" 65 : 35-42, 1995
15 "Improving orthodontic bonding to gold alloy" 108 : 510-8, 1995
16 "Handbook of optics" McGraw Hill 2 : 121-9, 1995
17 "Evaluation of a new curing light on the shear bond strength of orthodontic brackets" 73 : 431-5, 2003
18 "Epoxy adhesives for orthodontic attachments:Progress report" 51 : 901-12, 1965
19 "Effects of conventional and high intensity light curing on enamel shear bond strength of composite resin and resin-modified glass-ionomer" 119 : 30-5, 2001
20 "Effects of adhesive primers for noble metals on shear bond strength of resin cements" 25 : 53-8, 1997
21 "Direct bonding to Adlloy- treated amalgam" 112 : 252-8, 1997
22 "Dental composite depth of cure with halogen and blue light emitting diode technology" 186 : 388-91, 1999
23 "Degree of composite resin polymerization with visible light and argon laser" 4 : 40-2, 1991
24 "Bonding and debonding brackets to porcelain and gold" 93 : 341-5, 1988
25 "Adhesion promoters,their effects on the bond strength on metal brackets" 108 : 237-41, 1995
26 "Adhesion of orthodontic attachments to dental amalgam:In vitro study" 116 : 506-13, 1999
27 "A review of direct orthodontic bonding" 2 : 171-8, 1975
28 "A comparison of shear bond strength of orthodontic brackets using various light sources,light guides,and cure times" 121 : 510-5, 2002
3차원 CT 영상을 이용한 정상교합자의 안면 연조직 계측 분석
Self-etching primer를 사용하여 교정용 브라켓 접착 시 접착제와 타액오염에 따른 전단결합강도 변화
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2023 | 평가예정 | 해외DB학술지평가 신청대상 (해외등재 학술지 평가) | |
2020-01-01 | 평가 | 등재학술지 유지 (해외등재 학술지 평가) | ![]() |
2010-01-01 | 평가 | 등재학술지 유지 (등재유지) | ![]() |
2008-01-01 | 평가 | 등재학술지 유지 (등재유지) | ![]() |
2005-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | ![]() |
2004-01-01 | 평가 | 등재후보 1차 PASS (등재후보1차) | ![]() |
2003-01-01 | 평가 | 등재후보학술지 유지 (등재후보1차) | ![]() |
2002-01-01 | 평가 | 등재후보학술지 유지 (등재후보1차) | ![]() |
2000-07-01 | 평가 | 등재후보학술지 선정 (신규평가) | ![]() |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 1.13 | 0.47 | 0.83 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.67 | 0.55 | 0.311 | 0.24 |
Beginner Creator를 위한 LED/LCD 디스플레이와 센서 활용
K-MOOC 인하공업전문대학 조도현Beginner Creator를 위한 LED/LCD 디스플레이와 센서 활용[LED/LCD Display and Sensor Utilization for Beginner Creators]
K-MOOC 인하공업전문대학 조도현Beginner Creator를 위한 LED/LCD 디스플레이와 센서 활용[LED/LCD Display and Sensor Utilization for Beginner Creators]
K-MOOC 인하공업전문대학 조도현Beginner Creator를 위한 LED/LCD 디스플레이와 센서 활용[LED/LCD Display and Sensor Utilization for Beginner Creators]
K-MOOC 인하공업전문대학 조도현Pupil Led Sport
Teachers TV Teachers TV