고정밀급 박막저항을 위한 NiCr/NiCrSi박막의 제조 및 전기적 특성 = Electrical Characteristics and Fabrication of NiCr/NiCrSi Alloy Film for High Precision Thin Film Resistors

다국어 초록 (Multilingual Abstract)

In order to acquire fundamental informations to fabricate high precision thin film resistors, NiCr/NiCrSi alloy films were prepared using Ni and Cr targets. Effect of composition on the electrical properties of the NiCr/NiCrSi alloy film were then investigated. Considering the effect of Si doping on the electrical and material characteristics, the lower TCR (temperature coefficient of resistance) values could be achieved for samples with Ni/Cr ratio of $0.8{\sim}1.5$ (in a range of relative higher specific resistivity and Cr composition of $40\;wt%{\sim}55\;wt%$) and with Si doping. Consequently, the sample prepared using a DC power showed a good TCR of $-25\;ppm/^{\circ}C$, which implies that increase of specific resistivity and decrease of TCR would be achieved more efficiently not for Ni-Cr binary material but for Si doped Ni-Cr ternary material, and not using RF power but using DC power in the sputtering process.

참고문헌 (Reference)

1 이붕주, "낮은 저항온도계수를 갖는 박막 저항체 제작 및 신뢰성 특성 평가" 한국전기전자재료학회 20 (20): 352-356, 2007

2 D. M. Buczek, "Thin-film NiCr resistor" 15 (15): 370-, 1978

3 J. A. Thornton, "The microstrucure of sputter-deposited coatings" A4 (A4): 3095-, 1986

4 K. Matsuda, "Super precision metal film resistors" 26 (26): 283-, 1980

5 J. H. Mooij, "Structureal and properties of sputtered CrNi films" 9 : 446-, 1972

6 M. V. Swain, "R-curve behavior in a polycrystalline alumina material" 5 : 1313-, 1986

7 E. Schippel, "Modification test of vacuum deposition Ni/Cr films with Mn and Si for thin film resistors" 15 (15): 917-, 1980

8 M. A. Bayne, "Al-doped Ni-Cr for temperature coefficient of resistance control in hybrid thin-film resistors" A4 (A4): 3142-, 1986