Computed Radiography (CR) 시스템에서 영상의 신뢰성과 재현성을 높이기 위해서는 영상 획득 과정의 마지막 단계에서 이루어지는 나트륨램프의 소거에 의한 Image Plate (IP)의 완전한 초기화가 매우 ...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A100776846
임보연 (연세대학교) ; 박혜숙 (연세대학교) ; 김주혜 (연세대학교) ; 박광현 (연세대학교) ; 김희중 (연세대학교) ; Lim, Bo-Yeon ; Park, Hye-Suk ; Kim, Ju-Hye ; Park, Kwang-Hyun ; Kim, Hee-Joung
2009
Korean
KCI등재
학술저널
199-207(9쪽)
5
0
상세조회0
다운로드국문 초록 (Abstract)
Computed Radiography (CR) 시스템에서 영상의 신뢰성과 재현성을 높이기 위해서는 영상 획득 과정의 마지막 단계에서 이루어지는 나트륨램프의 소거에 의한 Image Plate (IP)의 완전한 초기화가 매우 ...
Computed Radiography (CR) 시스템에서 영상의 신뢰성과 재현성을 높이기 위해서는 영상 획득 과정의 마지막 단계에서 이루어지는 나트륨램프의 소거에 의한 Image Plate (IP)의 완전한 초기화가 매우 중요하다. 본 연구에서는 CR (Agfa CR 25; Agfa, BELGIUM)을 이용하여 잠상의 소거 후 지연시간에 따른 노이즈의 평가, 소거량에 따른 잠상의 소거 후 노이즈의 평가, 그리고 American Association of Physicist in Medicine (AAPM) Report 93 (2006)의 CR acceptance test 중 erasure thoroughness 평가를 시행하였다. 임상에서 주로 쓰이는 Chest postero-anterior (PA), Hand PA, L-spine lateral을 촬영 후 스캔하였다. Chest PA와 L-spine lateral은 Chest phantom (3D-torso; CIRS, USA)을 이용하여 촬영했고 Hand PA는 피검자를 통해 촬영되었다. 실험 결과 Hand PA를 제외한 나머지 unexposed image에서 지연시간이 길어질수록 전반적으로 ghost image를 비롯한 noise가 증가하였으며, overexposure된 부분을 따라 ghost image가 나타났다. 지연시간에 의해 야기된 noise에 의한 영향은 육안으로 확인되지 않았다. 픽셀 값의 standard deviation (SD)은 overexposure 된 부분이 상대적으로 높게 측정되었다. 잠상의 소거 정도에 따른 영상의 noise평가 결과 Hand PA, Chest PA는 소거 정도 값이 높아져도 noise는 증가하지 않았다. 그러나 상대적으로 조사선량이 큰 L-spine lateral은 기준 소거 정도보다 낮을 경우 noise가 발생하였다. Erasure thoroughness 평가 결과 학과 내 CR 장비의 잠상소거능력은 기준치에 부합함을 확인하였다. 본 연구가 IP 초기화에 기초적인 자료를 제공함으로써 신뢰성 있는 영상을 획득하는데 기여할 것으로 기대한다.
다국어 초록 (Multilingual Abstract)
It is important to initialize Image Plate (IP) completely for removing residual latent image by sodium lamp for reliability and repeatability of computed radiography (CR) system. The purpose of this study was to evaluate latent images of computed radi...
It is important to initialize Image Plate (IP) completely for removing residual latent image by sodium lamp for reliability and repeatability of computed radiography (CR) system. The purpose of this study was to evaluate latent images of computed radiography (CR) images respect to delay time after erasure of foregone latent image and its effect, and erasure level. Erasure thoroughness for CR acceptance test from American Association of Physicist in Medicine (AAPM) Report 93 (2006) was also evaluated. Measurements were made on a CR (Agfa CR 25; Agfa, BELGIUM) system. Chest postero-anterior (PA), Hand PA, L-spine lateral radiographs were chosen for evaluation. Chest phantom (3D-torso; CIRS, USA) was used for Chest PA and L-spine lateral radiography. For Hand PA radiography, projections was done without phantom. Except Hand PA radiographs, noise was increased with delay time, and ghost image was appeared on overexposed area. Effect of delay after erasure on latent image was not seen on naked eye, but standard deviation (SD) of pixel value on overexposed area was relatively higher than that of other areas. On Hand PA and Chest PA radiographs, noise were not occurred by adjustment of erasure level. On L-spine lateral images at lower erasure level than standard level, noise including ghost image were occurred because of high tube current. Erasure thoroughness of CR system in our department was to be proved by these evaluation. The results of this study could be used as a baseline for IP initialization and reliability of CR images.
참고문헌 (Reference)
1 Richard Whittington, "Verification of prostate treatment setup using computed radiography for portal imaging" 3 : 88-96, 2002
2 Rampado O, "Quantitative assessment of computed radiography quality control parameters" 51 : 1577-1593, 2006
3 Pongnapang N, "Practical guidelines for radiographers to improve computed radiography image quality" 1 : 18-22, 2005
4 Anders Tingberg, "Optimisation of image plate radiography with respect to tube voltage" 114 : 286-293, 2005
5 Yasushi Nakano, "KONICA MINOLTA Technical Report: A New CsBr Photostimulable Phosphor plate" KONICA MINOLTA Medical & Graphic Inc 1988
6 Nina Kowalczyk, "Exposure indicator degradation from CR plate processing delays" 80 : 401-403, 2009
7 Flynn MJ, "Experimental comparison of noise and resolution for 2k and 4k storage phosphor radiography systems" 26 : 1612-1623, 1999
8 Edward L. Siegel, "Conventional screen/film vs Reduced exposure photostimulable phosphor plate imaging in lower extremity venography" 156 : 1095-1099, 1991
9 Ralph Schaetzing, "Computed radiography technology" 10-13, 2003
10 Lu ZF, "Comparison of computed radiography and film/screen combination using a contrast-detail phantom" 4 : 91-98, 2003
1 Richard Whittington, "Verification of prostate treatment setup using computed radiography for portal imaging" 3 : 88-96, 2002
2 Rampado O, "Quantitative assessment of computed radiography quality control parameters" 51 : 1577-1593, 2006
3 Pongnapang N, "Practical guidelines for radiographers to improve computed radiography image quality" 1 : 18-22, 2005
4 Anders Tingberg, "Optimisation of image plate radiography with respect to tube voltage" 114 : 286-293, 2005
5 Yasushi Nakano, "KONICA MINOLTA Technical Report: A New CsBr Photostimulable Phosphor plate" KONICA MINOLTA Medical & Graphic Inc 1988
6 Nina Kowalczyk, "Exposure indicator degradation from CR plate processing delays" 80 : 401-403, 2009
7 Flynn MJ, "Experimental comparison of noise and resolution for 2k and 4k storage phosphor radiography systems" 26 : 1612-1623, 1999
8 Edward L. Siegel, "Conventional screen/film vs Reduced exposure photostimulable phosphor plate imaging in lower extremity venography" 156 : 1095-1099, 1991
9 Ralph Schaetzing, "Computed radiography technology" 10-13, 2003
10 Lu ZF, "Comparison of computed radiography and film/screen combination using a contrast-detail phantom" 4 : 91-98, 2003
11 정지영, "CR 시스템의 종류와 I.P 크기에 따른 정량적 영상특성평가" 한국의학물리학회 19 (19): 63-72, 2008
12 권덕문, "Analog & DigitalㆍPACS 의료영상정보학. 개정 5판" 대학서림 334-336, 2004
13 Ehsan Samei, "An experimental comparison of detector performance for computed radiography systems" 29 : 447-459, 2002
14 J. Anthony Seibert, "Acceptance Testing and Quality Control of Photostimulable Storage Phosphor Imaging Systems" American Association of Physicist in Medicine 2006
15 Moore CS, "A method to optimize the processing algorithm of a computed radiography system for chest radiography" 80 : 724-730, 2007
Dosimetric Characteristics of Edge $Detector^{TM}$ in Small Beam Dosimetry
3차원 볼륨 렌더링을 이용한 가상 돌출형 전립선 부피 평가
감마카메라에서의 팬텀 내 선원 위치 변화에 따른 산란 영향 평가
양성자 치료 전산모사를 위한 Geant4 전자기 물리 모델 정확성 검증
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2024 | 평가예정 | 재인증평가 신청대상 (재인증) | |
2021-01-01 | 평가 | 등재학술지 선정 (계속평가) | |
2019-01-01 | 평가 | 등재후보학술지 선정 (신규평가) | |
2016-12-01 | 평가 | 등재후보 탈락 (계속평가) | |
2015-12-01 | 평가 | 등재후보로 하락 (기타) | |
2014-07-10 | 학술지명변경 | 외국어명 : Korean Journal of Medical Physics -> PROGRESS in MEDICAL PHYSICS | |
2011-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2009-01-01 | 평가 | 등재 1차 FAIL (등재유지) | |
2006-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
2005-01-01 | 평가 | 등재후보 1차 PASS (등재후보1차) | |
2003-07-01 | 평가 | 등재후보학술지 선정 (신규평가) |