천일염 자동화 공정설계를 위한 물리적특성 분석 = Physical Properties Analysis for Automated Process Design of Solar Salts

국문 초록 (Abstract)

본 논문은 천일염의 기계화ㆍ자동화 생산모델 설계에 필요한 입자크기, 산물밀도, 마찰계수 및 안식각 등 설계인자를 구명하기 위하여 천일염의 함수율 5수준(16.5, 13.2, 8.2, 4.9 및 3.7%,w.b.)에서 실험을 수행하였다. 입자크기는 함수율 3.7%에서 1.98mm이였으며, 함수율 8.2%까지는 감소하는 경향이었고, 이후는 다시 증가하는 경향이었다. 산물밀도는 함수율 3.7%에서 643.5∼675.3kg/㎥이었으며, 이후 급격히 증가하여 함수율 4.9 및 8.2%에서 672.3∼702.8 및 705.4∼723.1kg/㎥으로 나타났다. 산물밀도는 함수율이 증가할수록 증가하는 경향이었으며, 입자의 크기보다는 함수율의 영향이 크게 나타났다. 정지마찰계수의 측정한 결과 재질에 따라 스테인레스에서 0.76∼1.04로 가장 높게 나타났고, ABS수지, 아크릴 순으로 낮게 나타났다. 정안식각 측정은 함수율 8.2% 이하에서 거동이 발생하였으며, 함수율이 증가함에 따라 배출 안식각은 증가하고 퇴적 안식각은 감소하는 것으로 나타났다.

다국어 초록 (Multilingual Abstract)

In this paper, the particle size, bulk density, friction coefficient and angle of repose were measured for the automatic processing of solar salt, which was classified with 5 levels of moisture content (16.5, 13.2, 8.2, 4.9, 3.7%). Average diameter was 1.98~1.60mm according to moisture content, and bulk density increased with increasing moisture content. As a result of measuring the coefficient of dynamic friction, the maximum value was shown in the stainless steel plate according to the material, and ABS plate and acrylic plate were lower in the order. Movement occurred at the moisture content of 8.2% or less, and the empty angle of repose was increased and the filling angle of repose was decreased as the moisture content increased.

목차 (Table of Contents)

• 요약
• Abstract
• 1. 서론
• 2. 재료 및 방법
• 3. 결과 및 고찰
• 4. 결론
• REFERENCE

참고문헌 (Reference)

1 Le Anh Du, "유채 종자의 물리적 특성(I)" 한국농업기계학회 33 (33): 101-105, 2008

2 S. E. Oh, "The Evaluation and Analysis of Characteristics according to Manufacturing Method of Pure Salt" Hoseo graduate school of venture, Department of Health Venture 2012

3 S. H. Suthar, "Some Physical Properties of Karingda Seeds" 65 (65): 15-22, 1996

4 S. J. Park, "Some Physical Properties of Chopped Rice Straw" 23 (23): 583-590, 1998

5 "Published in November 2017 Statistical Yearbook of Maritime Affair s & Fisheries Publisher : Ministry Of Oceans and Fisheries, Republic of Korea Edi. tor" Information Management Team Printed : Cree Communication 2017

6 J. H. Han, "Policy Issues of Sea Salt Industry, Research reports" Korea rural economic institute 2010

7 M. S. Kim, "Physical and Engineering Properties of Biological Materials" Munundang Publishers 149-167, 2006

8 N. N. Mohsenin, "Physical Properties of Plant and Animal Materials, seconded" Gordon and Breach Science Publishers 1986

9 E. A. Baryeh, "Physical Properties of Millet" 51 (51): 39-46, 2001

10 E. M. Santalla, "Physical Properties of High Oleic Sunflower Seeds" 9 (9): 435-442, 2003

11 A. P. Milani, "Determination of the Stored Products Properties for Silo Pressures and Flow Design" Engineering School of Soa Carlos, University of Sao Paulo 1993

12 J. O. Ha, "Comparison of Mineral Contents and External Structure of Various Salts" 27 (27): 413-418, 1998

13 P. J. Lawton, "Coefficients of Friction between Cereal Grain and Various Silo wall Materials" 25 (25): 75-86, 1980