단일기포 핵비등 시 미세액막층 구조에 대한 실험적 연구

국문 초록 (Abstract)

본 연구에서는 핵비등 시 미세액막층의 증발에 의한 열유속과 열전달률 계산을 위한 simple microlayer model 의 물리적 변수들을 측정하기 위하여 미세액막층의 형상을 실험적으로 조사하였다. 레이저를 이용한 전반사 및 간섭 기법을 이용하여 simple microlayer model 을 구성하는 인자들인 미세액막층의 초기 두께 및 수평 이동속도를 측정하였다. 대기압 포화상태의 물을 이용하여 수평 벽면에서 단일기포 핵비등 실험을 수행하였고, 평균 열유속 200 kW/㎡ 조건에서 동일한 위치에서 발생하는 기포들의 미세액막층의 구조적 특성을 분석하였다. 본 연구의 범위에서 측정한 미세액막층의 최대 초기 두께는 5.4 μm 이었으며, 증발에 의한 미세액막층의 수평 이동속도는 0.12 m/s 이었다.

다국어 초록 (Multilingual Abstract)

To measure the physical parameters of the simple microlayer model for the prediction of the heat flux and heat transfer rate due to the evaporation of the microlayer during nucleate boiling, the microlayer geometry was experimentally examined. The parameters, including initial thickness, moving velocity and microlayer radius, were measured by total reflection and interferometry techniques using a laser. Single-bubble nucleate boiling experiments were conducted using saturated water on a horizontal surface under atmospheric pressure. The geometric characteristics of the microlayer underneath the bubbles periodically nucleating at a nucleation site at an average heat flux of 200 kW/㎡ were analyzed. The experimental results in the present study show that the maximum initial thickness of the microlayer and the horizontal moving velocity are 5.4 μm and 0.12 m/s, respectively.

목차 (Table of Contents)

• 초록
• Abstract
• 1. 서론
• 2. 실험
• 3. 실험 결과
• 4. 결론
• 참고문헌(References)

참고문헌 (Reference)

1 Cooper, M. G., "The Microlayer in Nucleate Pool Boiling" 12 (12): 895-913, 1969

2 Kunkelmann, C., "The Effect of Three-phase Contact Line Speed on Local Evaporative Heat Transfer: Experimental and Numerical Investigations" 55 (55): 1896-1904, 2012

3 Tryggvason, G., "Studying Dynamics of Heterogeneous Continuum Systems Using DNS" 2007

4 Jawurek, H. H., "Simultaneous Determination of Microlayer Geometry and Bubble Growth in Nucleate Boiling" 12 (12): 843-848, 1969

5 Lee, S., "Multi-dimensional Two-phase Flow Analysis for the Passive Cooling Tank" 326-327, 2012

6 Utaka, Y., "Microlayer Structure in Nucleate Boiling of Water and Ethanol at Atmospheric Pressure" 57 (57): 222-230, 2013

7 Utaka, Y., "Heat Transfer Characteristics Based on Microlayer Structure in Nucleate Pool Boiling for Water and Ethanol" 68 : 479-488, 2014

8 Koffman, L. D., "Experimental Observations of the Microlayer in Vapor Bubble Growth on a Heated Solid" 105 (105): 625-632, 1983

9 Guion, A., "Dynamics of the Liquid Microlayer Underneath a Vapor Bubble Growing at a Heated Wall" V002T07A04-V002T07A04, 2013

10 Son, G., "Dynamics and Heat Transfer Associated with a Single Bubble During Nucleate Boiling on a Horizontal Surface" 121 (121): 623-631, 1999

11 Zhang, Y., "Characteristics of Microlayer Formation and Heat Transfer in Mini/microchannel Boiling Systems: A Review" 3 (3): 2012

12 Kunkelmann, C., "CFD Simulation of Boiling Flows Using the Volume-of-fluid Method within OpenFOAM" 56 (56): 631-646, 2009

13 Krepper, E., "CFD Modelling of Subcooled Boiling—Concept, Validation and Application to Fuel Assembly Design" 237 (237): 716-731, 2007

14 Lo, S., "CFD Modeling of Boiling Flow in PSBT 5× 5 Bundle" 2012 (2012): 8-, 2012