원추 지수가 트랙터 작업 부하에 미치는 영향 = Effect of the Cone Index on the Work Load of the Agricultural Tractor

다국어 초록 (Multilingual Abstract)

The purpose of this study was to analyze the effect of the soil cone index (CI) on the tractor work load. A load measurement system was constructed for measuring the field data. The field sites were divided into grids (3×3 m), and the cone index was measured at the center of each grid. The work load measured through the plow tillage was matched with the soil cone index. The matched data were grouped at 600 kPa intervals based on the cone index. The work load according to the cone index was analyzed for engine, axle, and traction load, respectively. The results showed that when the cone index increased, engine torque decreased by up to 9%, and the engine rotational speed and brake-specific fuel consumption increased by up to 5% and 3%, respectively. As the cone index increased, the traction and tillage depth were inversely proportional to the cone index, decreasing 7% and 18%, respectively and the traction and tillage depth were directly proportional to the cone index, increasing 13% and 12%, respectively. Thus, it was found that the cone index had a major influence on the engine, axle, and traction loads of the tractor.

참고문헌 (Reference)

1 박원엽, "트랙터의 견인성능 예측 프로그램 개발" 한국농업기계학회 37 (37): 131-139, 2012

2 이남규, "트랙터 최종구동축용 복합유성기어 방식 감속기의 Micro-geometry를 이용한 전달 오차 및 치면 하중 분포 개선에 관한 연구" 사단법인 유공압건설기계학회 17 (17): 1-12, 2020

3 박원엽, "타이어공기압에 따른 트랙터의 견인성능과 토양다짐" 한국농업기계학회 27 (27): 491-500, 2002

4 이진웅, "차축의 중량 분포와 타이어의 공기압이 트랙터 작업의 연료 효율에 미치는 영향" 한국농업기계학회 36 (36): 303-313, 2011

5 김완수, "주요 농작업에 따른 78kW급 농업용 트랙터의 소요 동력 분석" 대한기계학회 43 (43): 911-922, 2019

6 정병학, "정밀 경운을 위한 원추지수 지도 작성" 한국농업기계학회 30 (30): 127-133, 2005

7 이규승, "디지털 원추관입기 개발" 한국농업기계학회 35 (35): 387-392, 2010

8 김완수, "디스크플라우 및 로타리 작업에 따른 78 kW급 트랙터 PTO 가혹도 평가" 사단법인 유공압건설기계학회 16 (16): 23-31, 2019

9 백승윤, "농작업 부하 데이터를 활용한 80 kW급 전기구동 AWD 트랙터의 시뮬레이션 모델 개발" 사단법인 유공압건설기계학회 17 (17): 27-36, 2020

10 김수철, "농업용 트랙터의 연료 소비 효율 등급화" 한국농업기계학회 35 (35): 69-76, 2010

11 김완수, "Work load analysis for determination of the reduction gear ratio for a 78 kW all wheel drive electric tractor design" 농업과학연구소 46 (46): 613-627, 2019

12 J. M. Serrano, "Tractor energy requirements in disc harrow systems" 98 : 286-296, 2007

13 W. W. Brixius, "Traction prediction equations for bias ply tires" American Society of Agricultural Engineers 1987

14 F. M. Zoz, "Traction and Tractor Performance" American Society of Agricultural Engineers 2003

15 김택진, "Strength analysis of mechanical transmission using equivalent torque of plow tillage of an 82 kW-class tractor" 농업과학연구소 46 (46): 723-735, 2019

16 S. O. Chung, "Soil failure models for vertically operating and horizontally operating strength sensors" 49 (49): 851-863, 2006

17 Md Nafiul Islam, "Performance Evaluation of Trenchless Subsurface Drainage Piping Machine" 한국농업기계학회 44 (44): 218-225, 2019

18 A. Yahya, "Mapping system for tractor-implement performance" 69 : 2-11, 2009

19 P. Farhadi, "Finite element modeling of the interaction of a threaded tire with clay-loam soil" 162 : 793-806, 2019

20 C. E. Goering, "Engine and Tractor Power" American Society of Agricultural Engineers 1992

21 김연수, "Effect of tractor travelling speed on a tire slip" 농업과학연구소 45 (45): 120-127, 2018

22 A. M. Mouazen, "Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content" 86 : 218-229, 2006

23 Y. S. Kim, "Development of a Real-Time Tillage Depth Measurement System for Agricultural Tractors: Application to the Effect Analysis of Tillage Depth on Draft Force during Plow Tillage" 20 (20): 912-, 2020

24 Ministry of Agriculture, Food and Rural Affairs, "Development of Optimal Tillage System Based on Soil Physical Properties"

25 Y. S. Kim, "Analysis of Tillage Depth and Gear Selection for Mechanical Load and Fuel Efficiency of an Agricultural Tractor Using an Agricultural Field Measuring System" 20 (20): 2450-, 2020

26 Frank Gyan Okyere, "Analysis of Draft Force Requirement of a Compact Disc Harrow and Model Development for Future Predictions" 한국농업기계학회 44 (44): 47-56, 2019

27 "ASABE Standards D497.6, Agricultural Machinery Data"

28 N. Regazzi, "A theoretical study of the parameters affecting the power delivery efficiency of an agricultural tractor" 186 : 214-227, 2019

29 H. Taghavifar, "A hybridized artificial neural network and imperialist competitive algorithm optimization approach for prediction of soil compaction in soil bin facility" 46 (46): 2288-2299, 2013

30 W. Y. Park, "A Study on Soil Stress and Contact Pressure of Tire" 26 (26): 245-252, 2001