RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 학위유형
        • 주제분류
          펼치기
        • 수여기관
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 지도교수
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 수렴적 실재론에 대한 공약불가능성 논제의 도전 - 실재론자의 의미론적 대응 비판 -

        이병호 서울대학교 대학원 2016 국내석사

        RANK : 1919

        수렴적 실재론(convergent realism)에 따르면, 과학이 진보함에 따라 나중 과학이론이 이전 과학이론보다 참에 더욱 근접한다. 실재론자인 보이드(Boyd, R.)와 차크라바티(Chakravartty, A.)는 쿤이 이른바 공약불가능성 논제(the incommensurability thesis)에 근거해서 수렴적 실재론에 대한 반대 논변을 제시했다고 말한다. 그들이 정식화한 쿤의 공약불가능성 논제에 따르면, 과학혁명을 거치면서 과학적 용어의 의미는 물론이고 지시체마저 변화한다. 그러므로, 만약 공약불가능성 논제가 참이라면, 나중 이론이 이전 이론보다 더 향상된 것이고 따라서 참에 더욱 근접하다는 수렴적 실재론자의 주장은 거부되어야 한다. 왜냐하면, 과학혁명 전후 이론들이 겉보기에 동일한 용어를 포함한다고 하더라도 그 용어는 동일한 대상을 지시하지 않으며 그럼으로써 연구 대상을 공유하지 않기 때문이다. 예를 들어, 고전 역학과 상대론적 역학 모두가 ‘질량’이라는 용어를 포함한다고 하더라도, 만약 공약불가능성 논제가 참이라면, 그 용어는 각 이론에서 다른 의미를 가질 뿐만 아니라 다른 지시체를 갖는다. 결과적으로, 그 이론들은 다른 대상들에 관한 이론이므로, 아인슈타인의 이론이 뉴턴의 이론보다 더 향상된 이론이고 따라서 더 참에 근접하다는 주장은 거부되어야 한다. 위의 논의를 단초로 삼아 나는 이 논문에서 다음의 두 가지 문제를 다룬다. 첫 번째로, 나는 2장에서 쿤이 그의 공약불가능성 논제에 근거해 수렴적 실재론에 제기하는 도전이 무엇인가를 분명히 한다. 그는 수렴적 실재론을 과학이 진보함에 따라 과학이론의 존재론이 유일한 실재 세계(the one real world)의 존재론적 구조와 더욱 정확하게 대응해간다는 주장으로 파악한다. 그가 이러한 관념에 반대하는 이유는 과학혁명들에 대한 그 자신의 분석이 과학혁명 전후 이론들간의 존재론이 상이하다는 점을 보여주기 때문이다. 그런데 그는 그러한 존재론적 차이가 그 이론들의 개념적 어휘구조들(conceptual lexica)간 차이에서 비롯된다고 주장하며, 이러한 차이야 말로 쿤이 ‘공약불가능성’으로 가리키는 것이다. 더욱이, 쿤은 과학혁명 전후 이론들의 개념적 어휘구조가 서로 다르다는 그의 공약불가능성 논제에 근거해서 유일한 실재 세계의 존재론적 구조에 대한 앎이 원리적으로 불가능해보인다는 회의론을 채택한다. 이러한 회의론이야 말로 수렴적 실재론에 대한 쿤의 최종적인 도전이다. 두 번째로, 나는 쿤이 공약불가능성 논제를 의미론적 공약불가능성 논제(the semantic incommensurability thesis)로 재정식화하는 것을 허용한다는 점을 지적한다. 의미론적 공약불가능성 논제에 따르면, 과학혁명을 거치면서 용어의 의미와 지시체 모두가 변화한다. 나아가 3장에서 나는 의미론적 공약불가능성 논제에 대한 실재론자들의 반대, 즉 생키(Sankey, H.)와 버드(Bird, A.)의 논변에 의해 대표되는 실재론자의 의미론적 대응을 비판한다. 생키의 대응에 대하여, 3장 1절에서 나는, 기술구 이론을 거부하는 한편 인과-기술구 이론에 호소해서, 의미론적 공약불가능성 논제로부터 지시체 변화를 방어해내려는 생키의 대응이 논점을 벗어나 있거나 논점을 선취한다고 주장한다. 그런데 이때 내가 ‘논점’들로서 가리키는 것은 서로 다르다. 전자는 호이닝겐-휘네와 오버하임(Hoyningen-Huene, P.& Oberheim, E.)이 쿤의 공약불가능성 논제가 수렴적 실재론에 제기하는 진정한 위협으로서 제시한 것, 즉 존재론적 불연속/대체(ontological discontituity/replacement) 문제를 가리킨다. 후자는 그러한 존재론적 차이/대체에 근거한 쿤의 최종적 도전으로서 내가 제시한 것, 즉 쿤의 회의론을 가리킨다. 다시 말해서, 생키의 궁극적인 대응, 즉 수렴적 실재론이 존재론적 차이 문제와 양립가능하다는 그의 주장은 공약불가능성 논제에서 비롯되는 쿤의 회의론이 거짓임을 가정한다. 생키의 최종적인 대응이 쿤의 회의론의 거짓을 가정하는 반면, 버드의 의미론적 대응 일부는 쿤의 회의론과 밀접히 관련된 관점을 논박하거나, 쿤의 의미 이론을 수용하면서 몇몇 과학적 용어의 의미 변화를 부정하는 방식으로 이루어진다. 그리고 그가 그러한 방식을 채택하는 이유는 용어의 지시체 변화는 용어의 의미 변화를 요구하므로 의미 불변은 지시체 불변을 보장하기 때문이다. 구체적으로 말해서, 코페르니쿠스 혁명으로 인해 ‘행성’의 의미 및 지시체가 변화했다는 쿤의 주장에 대해, 버드는 기술구 이론을 받아들이면서 ‘행성’의 의미 불변 가설들을 제시함으로써 그것의 지시체 불변 가능성을 확보하려고 한다. 또한, 그는 쿤의 회의론과 밀접히 관련된 관점, 즉 풍부한 속성 관점에 대한 거부를 통해서 과학혁명들에 의해 ‘화합물’과 ‘질량’의 지시체가 변화했다는 쿤의 주장을 논박하려고 한다. 마지막으로, 버드에 따르면 쿤의 의미 이론을 받아들이더라도 뉴턴적 ‘질량’과 아인슈타인적 ‘질량’의 의미 및 지시체가 동일할 가능성이 있다. 만약 버드의 이러한 대응들이 그럴듯한 경우, 쿤은 그의 (의미론적) 공약불가능성 논제 혹은 그의 회의론 그 자체를 포기해야 하고, 이는 곧 수렴적 실재론에 대한 그의 도전을 철회하는 것을 의미한다. 그러나 나는 3장 2절에서 쿤이 그렇게 할 필요가 없다고 주장한다. 왜냐하면, 버드는 부지불식간에 코페르니쿠스 혁명을 통해 ‘행성’의 의미가 변화했다는 점을 인정하고 있기 때문이다(2.1절). 또한 ‘화합물’과 ‘질량’의 지시체 변화를 거부하기 위해 버드가 논박하는 풍부한 속성 관점은 지시체를 갖는 과학적 속성 용어에 관한 쿤의 관점의 과장된 형태이다(2.2절). 마지막으로 그는 ‘질량’의 의미 불변 가능성을 확보하려는 그의 논변에서 쿤이 거부할 수 있는 전제들을 활용하고 있다(2.3절).

      • 제곱級數의 收斂性에 관한 硏究

        류학상 연세대학교 교육대학원 2003 국내석사

        RANK : 1919

        본 논문에서는 제곱급수(冪級數)의 절대수렴(絶對收斂), 제일수렴(齊一收斂)에 관해서 여러 가지 성질을 조사하였으며, 제곱급수 □ a_(n) ( z-z_(0) )^(n) 의 수렴원 내에서의 연속성과 정칙성(正則性) 등을 연구하였다. 첫째 제곱급수 □ a_(n) ( z - z_(0) )^(n) 이 z = z_(1) ( z_(1) ≠ z_(0) )일 때, 수렴하면 그 급수는 | z - z_(0) |< | z_(1)-z_(0) |인 모든 z의 값에 대하여 절대수렴 한다. 또한 제곱급수 □ b_(n) / ( z - z_(0) )^(n)이 z = z_(1) ( z_(1) ≠ z_(0) )일 때 수렴하면, 그 급수는 z_(0)에 중심을 두고 z_(1)을 지나는 원 외부에 있는 모든 점에서 절대수렴한다. 둘째 제곱급수 □ a_(n)z^(n) 은 수렴원 내부에 있는 모든 점에서 z의 연속함수이고, 또한 정칙함수를 나타내며, 항등적으로 영(零)이 아닌 정칙함수의 영은 고립점(孤立點)이다. 제곱급수 □ a_(n)z^(n) 은 수렴원 내부에 있는 임의의 연속선을 따라 항별을 적분할 수 있고, 또한 수렴원 내부에 있는 모든 점에서 항별로 미분할 수 있다. 셋째 급수 □ c_(n)( z-z_(0) )^(n)이 환상영역 R_(0) < | z - z_(0) | < R_(1) ( 0< R_(0) < R_(1) ), 안에 있는 모든 점에서 f(z)에 수렴하면, 이 급수는 그 영역에서 ( z - z_(0) )의 제곱으로 된 함수 f의 로렌트급수 전개식이다. This thesis has studied the properties of the absolutely convergent and uniform convergence of power series, and has also studied the continuity and regularity inside the convergent series of the power series..etc. First, if power series □ a_(n) ( z-z_(0) )^(n) converges when z = z_(1) ( z_(1) ≠ z_(0) ), it is absolutely convergent for every value of z such that | z - z_(0) |< | z_(1) - z_(0) | If the series □ b_(n) / ( z-z_(0) )^(n) converges when z = z_(1), then it is absolutely convergent at every point z exterior to the circle centered at z_(0) and passing through z_(1) Second, a power series □ a_(n)z^(n) represents a function that is continuous and analytic at evert point z interior to the circle of convergence of that series The zeros of an analytic function f are isolated point, unless f is identically zero. A power series □ a_(n)z^(n) can be integrated term by term along every contour interior to the circle of convergence, and can be differentiated term by term at each point z interior to the circle of convergence. Third, if the series □ c_(n)( z-z_(0) )^(n) converges to f(z) at all points in some annular domain R_(0) < | z - z_(0) | < R_(1) ( 0< R_(0) < R_(1) ), then it is the Laurent series expansion for f(z) in powers of z - z_(0) for that domain.

      • 중국지역발전과 산업구조 간의 관계 : 국가균형발전을 중심으로

        왕펑 서울市立大學校 2017 국내박사

        RANK : 1919

        The gap between regions’ economic growth is inevitable in any country or any region, along with that of social and political dimension. Thus, it is considered reasonable for regional and national governments to establish regional development policies and balanced development strategies for underdeveloped or stagnated areas. However, there is no definite regional balanced development policy or strategies regarding how to push ahead balanced development in underdeveloped and stagnated areas. This is because of insufficient in-depth consideration of the causes of regional growth gap or regional economic growth. In such conditions, it has been around forty years since China had initiated reform and open policies. This study began to assess whether the current Chinese regional economic growth, which had established or promoted regional balanced development policies and strategies so far, is converging. Thus, this study examined convergence and convergence rate of regional economic growth in China, and analyzed convergence mechanism and influence factors of regional economic growth. This study has also empirically analyzed the long conflict between diversification and specialization of industrial structure in regional economic growth, examine to which direction the Chinese regional economic growth should be applied in the current phase. The major research results follow: First, the economic growth of thirty-one provinces and seven sectors of China has been proven to converge. But six sectors, excluding Huadong from seven, have been proved not to converge within each sectors. Second, China has implemented regional economic growth convergence mechanism suggested by the neo-classical economic growth theory, meaning that provinces that had low economic development level in early stages maintained high economic growth rate compared to provinces of high economic level, eventually enabling all provinces to reach similar economic growth levels and converge. Third, when regional economic growth factors were separated to national industrial growth factor, regional industrial structure factor, and regional characteristics for deeper analysis, national industrial growth factor and regional industrial structure factor has been verified to affect economic growth of thirty-one provinces of China. Meanwhile, regional characteristics do not influence economic growth. Fourth, the analysis of industrial structure feature on regional economic growth and the direction of which China should implement between industrial diversity and specialization, which was digitized to industrial structure’s diversity and specialization index from 2003 to 2015, was proved to have made positive effects on economic growth of all thirty-one provinces of China. The implications deduced from this research are: First, China has executed pole development strategy and regional priority development strategy ever since its reform and opening. It has also promoted regional balanced development after the introduction of market economy in the 2000s. This study has proved the convergence of economic growth between thirty-one provinces and seven sectors of China as well as within the Huadong sector. Thus, it is possible to conclude that the promotion of regional balanced development in national scale is effective. This also supports that economic development strategies or balanced development policies in national scale instituted in socialist countries such as China has clear effects. Second, the industrial structure factor, an endogenous factor of a region, has been demonstrated to greatly contribute to economic growth compared to the role of national policy in the context of convergence of China’s regional economic growth. Thus, in China’s current phase, it is advisable for regional governments to foster industrial structures that would promote regional economic growth or industries that could create numerous jobs. Third, regarding the issue of industrial structure’s diversity or specialization, the conclusion is that for China’s current regional economic growth, both diversification and specialization are crucial, and thus developing both could be suggested as an implication in terms of regional government’s promotion of industry and industry management policies. 지역 간의 경제성장격차는 사회적, 정치적 차원에서의 격차와 함께 어느 나라, 어느 지역에서나 불가피하게 초래되는 현상이다. 따라서 경제성장 낙후지역 또는 정체지역에 대하여 국가에서부터 지방정부까지 지역발전정책과 균형발전전략을 수립하는 것은 당위적인 것으로 받아들여지고 있다. 그러나 아직까지 경제성장이 낙후된 지역과 정체지역에 어떤 균형발전을 추진해야 하는가에 관해서는 뚜렷한 지역균형발전 정책이나 전략을 수립하지 못 하고 있는 실정이다. 이는 지역성장 격차가 왜 발생하는가? 또는 지역경제성장 원인이 무엇인가에 대한 심층적인 고찰이 아직 미흡하기 때문이다. 이와 같은 배경 하에, 중국이 개혁개방 시행한지 약 40년 경과하였다. 이 연구는 그 동안 지역의 균형발전을 도모하기 위하여 지역균형발전정책과 전략을 수립 또는 촉진 등의 노력을 해온 오늘 날 중국의 지역경제성장이 과연 수렴하고 있는가에서 출발하게 되었다. 따라서 이 연구에서는 중국 지역경제성장의 수렴여부와 수렴속도를 검증하였으며, 수렴의 메커니즘과 지역경제성장의 영향요인을 분석하였다. 그리고 오랫동안 학계에서 쟁점이 되고 있는 지역경제성장에 있어 산업구조의 다양성을 지켜나가는 것이 좋은가? 또는 산업구조를 특화시켜나가는 것이 좋은가에 대해 실증적으로 분석하여 중국의 지역경제성장이 현 단계에서 어느 방향으로 적용해야 할 것인지에 대해 규명하였다. 이 연구를 통해 도출한 주요 연구결과는 다음과 같다. 첫째, 중국 31개 성과 7개 권역 간 경제성장이 수렴하는 것을 입증하였다. 단, 7개 권역에서 화동권역을 제외한 6개 권역 내 성 간의 경제성장이 수렴하지 않는 것으로 밝혀졌다. 둘째, 중국지역경제성장 수렴의 메커니즘은 신고전학경제성장이론에 제시하는 지역경제성장 수렴 메커니즘을 적용하였다. 즉, 초기 경제성장 수준이 낮은 성들이 경제성장률이 높은 성보다 높은 경제성장률을 유지하면서 장기적으로 모든 성의 경제성장이 비슷한 수준에 도달하여 수렴하게 되는 메커니즘으로 검증되었다. 셋째, 기존연구와 차별점을 두고 지역경제성장의 요인이 국가의 산업성장요인, 지역의 산업구조요인 그리고 지역의 특성요인으로 분리하여 살펴보았을 때, 중국지역경제성장 수렴의 메커니즘에 있어 국가의 산업성장요인과 지역의 산업구조요인이 중국 31개 성의 경제성장에 영향을 미치는 것으로 분석되었다. 지역별 특성에 따른 경제성장의 차이를 적용하지 않을 것으로 입증되었다. 넷째, 지역경제성장에 있어 산업구조의 특성이 어떤 영향을 미치는지와 현 단계에서 중국의 지역경제성장이 산업구조의 다양성과 특화에 어느 방향으로 적용해야 할 것인지에 대해 분석하였다. 결과적으로 2003년에서 2015년까지의 기간에서 산업구조의 다양성지수와 산업구조 특화지수가 중국 31개 성의 경제성장에 긍정적 영향을 미친 것으로 확인되었다. 다음으로 이 연구를 통해 도출하는 시사점은 다음과 같다. 첫째, 중국 개혁개방 이후 거점발전전략과 선행지역발전전략을 실시하였다. 또 시장경제를 도입한 이후 2000년대에 들어가면서 지역균형발전을 도모하였다. 본 연구에서 중국의 31개 성과 7개 권역 간 그리고 화동권역 내 성들 간의 경제성장이 수렴하고 있다는 것을 입증하였다. 따라서 국가차원에서 추진해온 지역균형발전정책이 실효성이 존재한다는 판단을 내릴 수 있다. 이를 통해 중국과 같은 사회주의 국가에서 시행되는 국가차원에서의 경제발전전략이나 균형발전정책이 뚜렷한 효과를 가지고 있다는 것을 뒷받침할 수 있다. 둘째, 중국 지역경제성장의 수렴에 있어 국가정책의 역할보다, 지역의 내생적 요소인 산업구조요인이 경제성장에 크게 기여한 것으로 입증되었다. 이에 따라 중국의 현 단계의 경우 지역 차원에서 지역경제성장을 촉진시킬 수 있는 산업구조 또는 고용을 많이 창출시킬 수 있는 산업을 육성하는 것을 지방정부의 중요한 과제로 제시할 수 있다. 셋째, 산업구조의 다양성을 지켜나가는 것이 좋은가 또는 산업구조를 특화를 시키는 것이 좋은가에 대하여서는 현재 중국의 지역경제성장에 있어 산업구조 다양성과 특화가 지역경제성장에 모두 중요한 요인이며, 이를 동시에 중시하여 발전시키는 것을 지방정부의 산업육성과 산업관리정책에 시사점으로 제시할 수 있다.

      • 중국의 지역 간 소득 수렴에 관한 연구

        최영심 충북대학교 2018 국내석사

        RANK : 1919

        Since the opening up and reform, China’s economy has increased rapidly as a whole. Meanwhile, the economy gap among all regions has raised widely public concern. The hot topic of the economy growth theory always lies in how to explain economy grows over time and the gap of the economic development among all regions. The economy growth is caused by the interaction of the various factors in the complex system. Thus, to study the economy growth, we should study systemically. As such, we can come to effective conclusion. Due to different research methods and perspectives adopted by scholars, the conclusions of the scholars are various in terms of the study of the regional economic disparity. Based on analyzing different economic growth convergence hypotheses, this paper firstly focused on annual data of China's per capita GDP, with leader tenure as a period, through the neoclassical economic growth theory and Barro and Sala-i-martin (1992) research model, and studied the convergence mechanism of neoclassical economic growth in 29 provinces and cities in China. In order to analyze whether the factors in the East, Central, and West of China affect the convergence rate of the Chinese region, this paper also adopted regional dummy variables to conduct demonstrational research. Next, based on the research of Mankiw Romer and Weil (1993), this paper inserted several other variables into the model of Barro and Sala-i-martin (1992) to further confirm the convergence of regional economic disparity in China. Through demonstrational research, it found that since China’s reform and opening up, the inter-regional economy as a whole is in a convergence trend. While observing regional economic disparity of each leader’s tenure, it turns out that during Deng Xiaoping tenure the disparity has generally converged; during Jiang Zemin’s tenure the disparity has maintained the state quo, so does in Hu Jintao’s tenure. Because of only three years observation, the fact that the disparity in the Xi Jinping’s tenure maintains its status quo is not credible. 중국은 1949년 건국이래 약 20년간 사회주의 계획경제체제를 시행해왔다. 그러나 1970년대 중국은 경제와 정치 등의 방면에 많은 문제가 발생했다. 그래서 1980년대 등소평을 중심으로 한 중국 공산당 2세대 지도자들은 사회주의 계획경제를 개선하여 자본주의 시장경제를 지향한 중국식 사회주의를 수립하고 개혁개방의 첫 시작을 했다. 1978년 등소평은 "선부론"(先富论)전략 사상을 제안했다. 연해 지역을 우선 개발하고 그 이후 연해 지역이 어느 정도 개발되면 연해지역을 통해 내륙지역의 경제발전을 돕는다는 전략이다. 이러한 경제개발전략은 이후 중국의 지역 경제 정책 수립에 중대한 영향을 주었고, 중국은 지역 경제의 균형 성장 전략에서 지역 경제의 불균형 성장 전략으로 전환하게 된다. 개혁개방 후 1995년, 중국 경제는 두자릿수의 성장률을 유지하고 있지만, 연해지역과 내륙지역 사이의 경제 격차는 급격히 확대되어 국가 통합, 사회 안정 및 국가 경제의 건전한 발전에 심각한 영향을 미쳤다. 동시에 중국의 경제개발 수준은 이미 충분한 수준에 이르렀고 연해지역과 내륙지역의 경제 격차 문제를 해결하기 위한 필요조건이 이미 마련했다고 생각하여 강택민은 동부와 서부지역간의 경제개발 격차를 좁히기 위해 서부 대 개발 (西部大开发) 등 경제 정책을 제안 했다. 그리고 제16대 전국 대회가 끝난 후 호금도 주석은 과학 발전관(科学发展观)을 재시했다. 과학 발전관은 지역발전을 총괄하는 다방면의 발전을 도모하고, 지역발전의 여러 면을 적절하게 안배하여 지역 발전의 각 분야를 아우르며, 각 지역의 조화로운 발전과 공동 번영의 길로 나아가는 것을 핵심골자로 하고 있다. 호금도 주석은 중국 기역 경제 발전의 현황을 파악하여 동북 진흥(振兴东北)과 중부 궐기(中部崛起)발전 전략을 잇따라 가동해 중국지역 발전을 아우르는 전략을 제시했다. 이에따라 중부 궐기 동북 진흥과 서부 대 개발은 완전한 전략 체계를 갖추게 됐다. 중국 18대 대회 이후 습근평(習近平)주석은 중국 경제발전 현황을 파악하고 새로운 지역발전 전략을 제시했다. 그는 지역발전 전략을 지속적으로 시행하고 지역발전을 촉진하겠다고 거듭 강조했다. 습근평(習近平)주석은 신 실크로드 경제권(新丝绸之路经济带), 21세기 해상 실크로드(21世纪海上丝绸之路), 중국(상하이) 자유 무역 지대(中国上海自由贸易试验区), 징진지 협동 발전(京津翼协同发展), 장강 경제 벨트(长江经济带) 등 전통적인 지역 경제발전과 개방형 지역경제발전의 새로운 틀을 제시하며 새로운 동력을 창출했다. 개혁개방 이후 중국의 총 GDP는 연평균 9.6%씩 고속 성장해 왔다. 그러나 문화, 경제, 정치 등의 요인으로 인해 중국은 지역 경제의 격차가 더 벌어졌고, 중국은 세계에서 경제 성장이 가장 빠른 국가뿐만 아니라 세계에서 경제 격차가 가장 큰 나라로 꼽혔다. 1990년부터 많은 학자들이 중국의 경제 격차 문제점을 중심으로 연구해왔고 각종 연구도 많았다. 그러나 경제 흐름이 자주 바뀔 뿐만 아니라 같은 분석 방법이라도 표본이 달라짐에 따라 다른 결론이 도출될 수 있다는 점에 착안해 본 논문은 중국 개혁개방 이후 39년간 29지역의 실질 GDP를 표본으로 중국지역 간 경제적 격차의 수렴 여부를 재조명해 본다. 또한 본 논문은 기존 연구과 달리 1978년부터 현재까지 39년을 정권별로 나누어 각 지도자 재임 기간 중 중국의 각 지역 간 경제적 격차의 수렴 여부도 함께 살펴보고자 한다.

      • 수렴각과 치관 길이를 달리한 금속 다이상에서 수종의 치과용 시멘트를 적용한 전부주조금관의 유지력 비교

        윤중호 연세대학교 대학원 2001 국내석사

        RANK : 1919

        전부주조금관의 유지력은 삭제된 치아의 표면적과 거칠기, 수복물의 내면 적합성 등에 의해서도 영향을 받을 수 있지만 지대치 자체의 기하학적인 형태와 사용된 시멘트의 종류 및 기계적 강도 등에 의하여 상당부분을 얻는 것으로 알려져 있다. 본 연구의 목적은 각각의 치과용 시멘트 군에서 수렴각 구간 사이에서의 유지력의 변화량 차이에 대해 회귀 분석에 의한 함수 관계로 나타내어 비교하고자 하는 것으로부터 수렴각의 증가가 유지력에 미치는 영향을 고찰하는 것이다. 다이 길이의 증가의 영향에 대해서도 비교하여 보았다. 5mm의 치관 길이와 5, 10, 15, 25도의 수렴각을 가진 금속 다이상에서 제작한 전부주조금관을 임상에서 많이 사용하고 있는 치과용 시멘트들인 인산아연 시멘트(Fleck's zinc phosphate cement), 레진-변형 글래스 아이오노머 시멘트(Vitermer), 레진 시멘트(Panavia 21)으로 합착 후 인장력을 가하여 분리되는 시점을 측정하였다. 그 결과로써 회귀 분석을 이용하여 함수 관계로 나타낸 결과를 비교하였고 수렴각을 달리하여 제작하는 것 이외에도 유지력에 영향을 많이 미치는 기하학적 요인(geometric factor) 중 하나인 치관 길이를 5mm에서 10mm로 달리하여 상기 방법에 의해 실험, 치관 길이의 증가의 영향에 관하여 고찰하여 다음과 같은 결과를 얻었다. 1. 동일 수렴각에서 평균 유지력은 레진 시멘트, 인산아연 시멘트, 레진-변형 글래스 아이오노머 시멘트 순으로 높게 나타났으며 모든 시멘트에서 수렴각의 증가에 따라서 평균 유지력은 유의차를 보이면서 감소하였다(p<0.05). 수렴각 5도 증가 시 유지력의 감소율(%)은 레진-변형 글래스 아이오노머 시멘트 15.9%, 레진 시멘트 14.8%를 나타내었다. 인산아연 시멘트에서는 수렴각이 5도에서 10도로 증가 시 가장 큰 25.5%의 유지력 감소율을 보였으며 그 후 수렴각 5도 증가마다 19.4%, 13.4%, 7.3%로 점차 낮은 감소율을 나타내었다. 2. 인산아연 시멘트와 레진-변형 글래스 아이오노머 시멘트에서는 모든 수렴각의 증가 구간에서 유지력이 유의차를 보이면서 감소하였으나(p<0.05) 레진 시멘트에서는 수렴각 5도에서 10도로 변하는 구간에서는 유지력 사이의 유의한 차이를 보이지 않았고(p>0.05) 나머지 구간에서는 모두 유의차를 보이면서 감소하였다(p<0.05). 3. 5mm의 동일 길이 실험군에서 인산아연 시멘트의 수렴각이 5도인 경우와 레진 시멘트의 수렴각이 10도인 경우, 그리고 인산아연 시멘트의 수렴각이 10도인 경우와 레진 시멘트의 수렴각이 15도인 경우 모두 각각의 두 평균 유지력 간에는 통계학적인 유의차가 없었다(p>0.05). 4. 각 시멘트 별 회귀 분석 모형에서는 수렴각과 유지력에 대해 인산아연 시멘트는 곡선 형태의 반비례 함수 관계를 보였으나 레진-변형 글래스 아이오노머 시멘트와 레진 시멘트에서는 직선 형태의 함수 관계를 나타내었다. 5. 모든 시멘트에서 다이 길이가 5mm에서 10mm로의 증가할 때 동일 수렴각에서 유지력은 유의차를 나타내면서 증가되었다(p<0.05). 6. 인산아연 시멘트 10mm 길이의 수렴각 15도에서의 평균 유지력과 레진 시멘트 5mm 길이의 수렴각 5도, 10도의 평균 유지력 사이에는 모두 통계학적으로 유의차가 없었다(p>0.05). 이상의 연구결과, 현재 임상에서 사용되고 있는 특정 치과용 시멘트의 적용시 유지력은 지대치의 기하학적 형태에 상당부분 영향을 받고 있다는 것을 알 수 있으며 만일 서로 다른 치관 길이와 수렴각을 가지는 경우 유지력 증가를 위해 시멘트 선택에 있어 주의가 요망된다. 또한 현재 빈번히 이루어지고 있는 치과용 시멘트 임상적 적용의 연구에 있어서 그 실험 조건을 임상적인 환경에 좀 더 가까워지도록 하는 기술적 개발이 필요하리라 사료된다. The retention of the full veneer casted gold crown is dependent with surface area; roughness of the surface, fitness of prosthesis but it can be also influenced by the geometric factors of the abutment, the types of cement used and the mechanical strength. The aim of this research is to establish the effect and variation in differing convergence angle on the retention of full veneer casted gold crown by regressional analysis. Affect of different crown length was also studied. Full veneer casted gold crowns were constructed using dies measuring 5mm in height with convergence angles of 5, 10, 15 and 25 degrees. Cementation was done using cements commonly in the clinical settings; zinc phosphate cement(Fleck's zinc phosphate cement), resin-modified glass ionomer cement(Vitremer) and resin cement(Panavia 21). These were tested for tensile force at the point of separation. The results from different convergence angles were compared using regressional analysis model. Repeating the method described above using dies with increased crown length from 5mm to 10mm the geometric effect on the retention were compared. The results are as followed; 1. The mean retention was the strongest with resin cement followed by zinc phosphate cement, resin-modified glass ionomer cement in the same convergence angle. In all cements the mean retention decreased with significant difference on increase of convergence angle(p<0.05). Increase in every 5 degree- convergence angle the retention rate decreased with resin-modified glass ionomer cement of 15.9% and resin cement of 14.8%. With zinc phosphate cement, there was largest decreasing rate of mean retention of 25.5% between convergence angles from 5 degree to 10 degree. Following this, there was decrease in the rate from 19.4%, 13.4%, then to 7.3% with increase of 5 degree in the convergence angle. 2. Mean retentions of zinc phosphate cement and resin-modified glass ionomer cement decreased with significant difference in each increase in convergence angle(p<0.05), whereas resin cement showed no significant difference between the retention of groups with 5 degree and 10 degree-convergence angle(p>0.05), then it decreased with significant difference in all the other convergence angles(p<0.05). 3. With the same crown length of 5mm, mean retentions between zinc phosphate cement with 5 degree-convergence angle and resin cement with 10 degree-convergence angle, and between zinc phosphate cement with 10 degree-convergence angle and resin cement with 15 degree-convergence angle did not show any significant difference(p>0.05). 4. In the regressional analysis model in each cement, zinc phosphate cement showed a quadratic function with inverse proportion, whereas resin-modified glass ionomer cement and resin cement resulted in simple function with inverse proportion for the convergence angle and retention. 5. When the crown length increased from 5mm to 10mm, the retention increased with the significant difference in the same convergence angle and in all types of cements used(p<0.05). 6. There was no significant difference in mean retentions between zinc phosphate cement with 10mm-crown length at 15 degree-convergence angle and resin cement with 5mm-crown length at 5 and 10 degree-convergence angle(p>0.05). The results of this study showed that the retention was strongly dependent on geometric factors of abutment. Much care is required in choosing cements for an optimal retention in abutments with different convergence angles and crown lengths. Further research in clinical application of widely studied dental cements in a more vivo-environment is required.

      • 평균법과 동적법을 이용한 동절기 공동주택 외벽체의 열저항 및 열관류율 수렴성 분석

        문지훈 인천대학교 대학원 2020 국내석사

        RANK : 1918

        최근 국가 온실가스 배출전망치 감축 목표의 이행 가능성을 높이기 위해 추가 감축 계획을 발표함에 따라 건물부문에서는 신축 건축물의 단열성능 기준 강화, 기존 건축물의 단열 보완을 포함한 그린리모델링 활성화 등 단열성능 향상을 통해 건물에서 소비되는 에너지 감축을 도모하고 있다. 그중 에너지를 가장 절약할 수 있는 부문은 기존 구축된 노후건축물이며 노후건축물을 대상으로 경제적이고 합리적인 그린리모델링이 진행되기 위해서는 외피 성능 개선을 통해 건축물 에너지성능 향상 공사가 이루어져야 한다. 리모델링의 대상이 되는 건물은 사전에 전반적인 진단이 이루어져야 하지만, 건물 벽체의 이론적으로 계산된 열저항 및 열관류율은 노후화로 인해 초기 단열성능을 구현하지 못하여 실제 열저항 및 열관류율과 차이가 보고되고 있어 열저항 및 열관류율 현장측정을 통해 단열성능을 정확하게 진단할 필요가 있다. 현장 측정을 통한 노후화된 건물 외벽체의 단열성능 진단 방법으로, 다양한 연구에서는 높은 열용량의 중량 벽체를 실제 측정 환경에서 실내·외 온도 및 열류량을 측정하여 열저항 및 열관류율을 분석하는 열류계법을 이용한다. 열류계법에서 가장 대표적으로 사용되는 평균법은 기존 연구에서 가장 많이 활용되고 있는 방식이기는 하나, 열저항 및 열관류율 도출에 필요한 충분한 측정 기간을 확보하지 않거나 합리적인 열저항 및 열관류율 산정에 필요한 수렴성 검토가 부족하다. 또, 장기간 측정임에도 수렴성 있는 값을 산출하지 못할 때 대안으로 제시되는 동적법은 열저항 및 열관류율 산출 수식에 열특성이 반영하기 때문에 측정 기간 단축 가능성이 있다고 알려졌으나 동적법의 수렴 및 측정 기간을 정량적으로 분석한 연구가 부족하여 이를 검토할 필요가 있다. 이에 본 연구에서는 노후화된 공동주택 중 대표 주거 유형인 아파트를 준공연도에 따라 3개의 사례로 제시하여 열류계법에서 권장하는 측정 환경에 근접하는 동절기에 측정을 진행하였으며, 단열성능 기준인 열저항 및 열관류율을 평균법에 의해 도출하여 단열성능 저하를 확인하였다. 또한 수렴조건 만족 여부를 확인하여 수렴성을 확인하였으며 동적법의 수렴성 및 측정 기간 단축 가능성을 평가하였다. 연구의 결과는 다음과 같다. 1) 열류계법에서 권장하는 측정 장비 및 측정 환경을 준수하여 실내·외 대기온도와 표면온도, 열류량을 측정하였으며, 안정적 측정 환경 검토를 위해 일사량, 실내·외 풍속을 측정하였다. 모든 사례에서 열류계법에서 권장하는 10℃ 이상의 온도차를 충족하였으며, 일사량과 풍속은 사례별로 차이가 있으나 직달일사와 대류 열전달에 의한 영향을 최소화한 환경으로 나타났다. 2) 대상 건물 외벽체의 측정 데이터를 이용하여 평균법에 의해 열저항 및 열관류율을 분석한 결과, 설계법에 의한 열저항 및 열관류율과 비교하였을 때 Case A에서 –104.6%, 49.4%의 편차로 나타났고, Case B는 –30.0%, 30.7%, Case C는 –32.9%, 32.5%로 나타나 세 가지 사례 모두 노후화로 인한 단열성능 저하로 계산법에 의한 이론적인 값과 현장 측정을 통한 실제값의 차이를 확인하였다. 또한 준공연도에 따른 벽체 열저항 및 열관류율의 성능 저하보다는 벽체 구성에 따른 열저항 및 열관류율의 성능저하가 나타났다. 3) 측정 기간 증가에 따른 평균법의 수렴성 분석을 통해 합리적인 열저항 및 열관류율을 평가한 결과, Case A는 꾸준하게 수렴 조건을 만족하기 위해 최소 17일 이상이, Case B는 최소 5일 이상의 측정 기간이 필요한 것으로 나타났다. 그러나 Case C는 day 14에서 안정적인 측정 환경임에도 불구하고 수렴 조건 만족이 어려운 것으로 나타났다. 또한 수렴 분석의 지표로 제시되는 수렴 조건은 조건 2가 조건 3에 비해 수월한 것으로 판단된다. 4) Case A에서 평균법에 의해 합리적인 열저항 및 열관류율을 산정하는데 최소 17일의 측정 기간이 필요한데 비해, 동적법에서는 열저항 및 열관류율 산정을 위해 최소 6일의 측정 기간이 필요한 것으로 나타났다. Case B에서 평균법은 5일, 동적법은 6일로 분석되었으며, Case C에서는 평균법에서 14일보다 더 장기간의 측정이 필요한데 비해 동적법에서는 5일의 최소 측정 기간이 필요한 것으로 분석되어 동적법에 의한 측정 기간 단축을 확인하였다. 5) 노후건축물에서 단열재의 성능 저하를 개선하기 위해 경제적인 리모델링 개·보수 전략 및 에너지 계획 수립을 위해 평균법을 대신해 동적법을 적용한다면 합리적인 계획을 수립하는데 기여할 뿐만 아니라 측정 기간을 단축할 수 있을 것으로 기대된다.

      • 무한급수의 특별한 수렴판정에 관한 연구

        곽부진 인제대학교 교육대학원 2006 국내석사

        RANK : 1918

        무한급수는 해석학에서 가장 폭 넓게 사용되는 분야중의 하나이다. 무한급수에 대해 가장 먼저 고려되어야 할 사항은 그것들의 수렴하는지 아닌지를 결정하는 것이다. 본 논문에서는 무한급수의 수렴 여부를 알 수 있는 몇 가지 특별한 판정법을 연구하였다. 또한, 교대급수에 대해 자신의 부분합에 의한 수렴정도를 연구하였다. Infinite series is one of the most widely used areas of analysis. The first concern about infinite series is to determine the convergence of it. In this these, we study several special tests for convergence of infinite series. Also, we study an estimate of the rate of approximation of alternating series by its partial sums.

      • 가변길이 및 최적수렴인자를 갖는 적응 필터링 알고리듬에 관한 연구

        부인형 광운대학교 대학원 1994 국내박사

        RANK : 1918

        잡음 제거, 채널 등화, 선형 예측, 시스템 식별 등 다양한 응용 분야에서 이용되는 적응 필터는 그 알고리듬에 따라 성능이 크게 좌우된다. 이러한 이유로 지금까지 적응 필터링 알고리듬에 대한 수렴 속도의 증가와 계산의 복잡성을 줄이기 위한 여러 방법들이 제안되어 있다. 그중 최소 평균 자승 (LMS) 알고리듬은 계산이 간편하고 기억 용량이 적기 때문에 널리 이용되며, 순화 최소 자승(RLS) 알고리듬은 그 빠른 수렴 속도로 인해 또한 폭넓게 이용되고 있다. 그러나, RLS 알고리듬의 주된 문제점은 계산량이 많은 점이며, LMS 알고리듬은 수렴속도가 느리다는 것이다. 이러한 LMS 알고리듬의 수렴 속도는 필터 입력 자기 상관 행렬의 고유치 확산 정도와 수렴 인자 μ값 그리고 실제 응용에 알맞는 필터 차수와 같은 요인에 의해 결정되어진다. 본 논문에서는 구조적 부대역 분해에 기초한 최적 수렴 인자를 갖는 가변 길이 (VLOCF) 적용 알고리듬을 제안하였다. 제안한 알고리듬은 각 반복 수행마다 각 필터 가중치에 최적의 수렴인자 μ를 자동적으로 제공하며, 이 최적 수렴인자값은 평균 자승 오차 (MSE) 기울기의 각도를 기준으로 결정된다. 또한 적응 필터 길이가 완화 자승 오차 기준에 의해 적절히 가변 조절되므로써 불필요한 계산을 줄일 수 있다. 이러한 방식은 구조적 부대역 분해를 기초로 하는 FIR 필터 구조에서 수행된다. 따라서 제안한 알고리듬은 위 세가지 요소 (최적 수렴 인자, 필터 길이 그리고 필터 입력의 사전 백색화) 를 유기적으로 적절히 조절하여 최상의 적응 성능을 이끌어내는 방식으로서 적응 필터 입력 자기 상관 행렬의 고유치 확산이 매우 큰 경우에도 매우 우수한 수렴 속도의 향상과 최저의 수렴 오차를 보였다. 이에 반해 계산량은 약간 증가하였다. 제안한 알고리듬의 성능을 평가하기 위해서 시변 및 불시변 환경에서의 시스템 식별 및 채널 등화에 대한 컴퓨터 모의 실험을 수행하였다. 실험 결과 제안한 알고리듬이 기존의 널리 쓰이는 여러 알고리듬 (정규화된 LMS, RLS, VSS, NCF, AGC)과 비교하여 주변 잡음과 적응 필터 입력의 고유치비의 크기에 관계없이 매우 뛰어난 수렴 성능을 보였다. The performance of adaptive filler depends on the algorithm, which is used for a variety of applications such as noise cancellation, linear prediction, channel equalization and system indentification, etc.. For this reason, so far, various methods have been proposed to reduce the computational complexity and increase the convergence speed of adaptive filtering algorithms. The least mean square (LMS) algorithm is popular for its low computational complexty and memory requirement, while the recursive least square (RLS) algorithm is generally known for its higher convergence speed. A major drawback of RLS algorithm is the large number of arithmetic operations and that of LMS algorithm is the slow convergence speed. The convergence speed of LMS algorithm is governed by several factors such as the eigenvalue spread of auto-correlation matrix of the input data, the convergence factor μ, and appropriate filter order for the application. In this dissertation, we propose a variable length adaptive algorithm with optimum convergence factor (VLOCF) based on the structural subband decomposition (SSD). The proposed algorithm updates automatically optimum convergence factor to each filter weight in every iteration. The optimum convergence factor value is determined by the criterion of mean square error (MSE) gradient angle. Also, the variable filter length is appropriately controlled by the smoothed absolute error criterion so that the redundant calculations are removed. By this method, the proposed algorithm achieves the dramatic enhancement in convergence speed and very lower misadjustment in spite of very eigenvalue spread of input auto-correlation and nonstationary input signals with moderate computation load increments. In other words, the proposed algorithm is the systematic method to control appropriately the three major factors expressed before (optimum convergence factor, filter length, and pre-whitening of adaptive filter input). Last of all, the performance of proposed algorithm is evaluated by computer simulation for system identification and channel equalization in time-varying and time-invariant environment. The results show that the proposed algorithm has excellent performance in spite of the additive noise of the system and scale of the eigenvalue spread of input auto-correlation matrix compared with conventional algorithms (such as normalized LMS, RLS, VSS, NCF, AGC).

      • 함수열과 함수열급수의 균등수렴에 관한 연구

        김소정 인제대학교 교육대학원 2004 국내석사

        RANK : 1917

        본 연구에서는 함수열과 함수급수의 점별수렴과 균등수렴을 정의하고 이 두 수렴사이의 관계를 조사한다. 또한, 여러 가지 예를 통하여 수렴에 대한 개념을 올바르게 이해하고, 균등수렴이 함수열과 함수급수에 주는 역할과 균등 수렴 판정법을 알아본다. 또한, 균등수렴하는 연속인 함수들의 수열의 극한함수는 연속이 됨을 증명하고, 점별수렴하는 경우에는 이 성질이 만족되지 않음을 보인다. In this study, we define pointwise convergence and uniform convergence of a sequence of functions. Through many examples, we also understand a general concept of convergence. We also investigate the relationships between the uniform convergence of a sequence of functions and continuity, integrability, differentiablity of limit tast.

      • 純祖初半 貞純王后의 垂簾聽政과 政局變化

        임혜련 淑明女子大學校 1999 국내석사

        RANK : 1917

        純祖初半의 정치는 조선후기 정치사의 흐름에서 볼 때 蕩平政治에서 勢道政治로 넘어가는 사이의 과도기였다. 이때는 純祖가 11세의 어린 나이에 즉위하였으므로 大王大妃인 貞純王后 金氏가 垂簾聽政 하였고, 이것을 배경으로 하여 친정가문인 慶州金氏의 인물들이 정계에 등장하게 되었다. 그러나 이들은 정순왕후가 撤簾하고, 사망하자 급격히 세력이 약화되어 새로이 외척의 지위를 얻게된 安東金氏 金祖淳 家門에 의해 정계에서 축출당하게 되면서 이후의 정치는 勢道政治期로 이행하게 되었다. 貞純王后는 英祖 후반 외척가문들의 정계활동을 이용하여 정국의 안정을 얻으려고 한 영조의 의도에서 중전으로 간택되었다. 당시 정순왕후의 친정가문인 경주김씨 가문은 충청도에서 세력을 가지고있던 호론계 산림가문으로 정계에서 활동은 미약한 상태였다. 그러나 정순왕후의 간택을 계기로 해서 이들의 정계진출은 두드러졌고, 영조 말기에는 풍산홍씨 홍봉한 가문과 대립하여 南黨을 형성할 정도로 세력이 확장되었다. 正祖가 즉위하면서 영조년간 문제가 되었던 척신세력을 정계에서 배제하자 정순왕후의 친정가문 인물들은 정계에서 제외되었다. 한편 정순왕후는 王大妃로서 왕실을 보호하기 위하여 노력하였는데, 정조에게 후사가 없다 빈간택을 명하기도 하였으며 여러차례 왕실의 죽음을 둘러싸고 그 배후로 恩彦君을 지목하였다. 은언군의 처벌을 두고 정순왕후는 정조와 대립하였는데 이때의 행동은 정조는 개인적인 의리를 앞세웠던데 반하여 정순왕후는 공적의리를 지키려 하였던 것으로 평가할수 있겠다. 이후 정조가 승하하고 순조가 어린나이에 즉위하자 정순왕후는 고례에 의거하여 수렴청정을 하게되었다. 수렴청정은 임시로 행하는 정치형태인만큼 정형화된 형식이 없었으나 정순왕후가 수렴청정하면서 垂簾聽政 節目을 제정하는등 제도상으로 완비되었다. 수렴청정 절목을 통해서 볼 때 수렴하는 대왕대비의 권한은 국왕과 맞먹는 정도로 큰 영향력을 가지고 있었다. 이러한 점은 정순왕후가 순조년간에 하교한 내용을 분석함으로써 증명되었는데, 정순왕후는 특히 인사문제에 관심을 가지고 관여하였으며, 서학탄압등 辛酉年 換局에서 많은 하교를 내렸다. 수렴청정기 정순왕후의 역할은 僻派의 義理를 재해석하여 경주김씨와 벽파세력이 등장하는 명분을 제공하였다. 그러나 왕실의 최고의 어른으로서 국왕을 보호하는 본연의 임무에도 충실하였다고 보여진다. 정순왕후가 수렴청정하게 되자 이를 배경으로 경주김씨 벽파세력이 다시 등장하면서 정치세력의 재편은 불가피한 것이 되었다. 이들은 순조 원년 환국을 일으켜서 정조의 측근 신하였던 尹行恁, 풍산홍씨 가문의 洪樂任, 정조의 형제인 은언군을 제거하였으며, 南人勢力을 축출하면서 정계에 본격적으로 등장하였다. 이는 정조년간 소외되었던 점과 비교하면 놀라운 성장으로 수렴청정하는 왕후의 정치력이 크게 작용하였던 것이다. 순조초반 활동하였던 경주김씨 인물들로는 金觀柱, 金日柱, 金魯忠, 金勉柱 등을 들수 있다. 그러나 이들은 정조년간 탕평으로 그 의미가 많이 퇴색하였던 벽파의리를 정립하여 일당전제를 지향하려 하였지만 이것은 당시 공감대를 형성하지 못하였다. 그래서 정순왕후가 撤簾하자 세력이 급속히 약화되었으며 정순왕후가 사망한 후에는 정계에서 축출되었다. 철렴직후 일어난 權裕 獄事, 그리고 丙寅年 換局으로 경주김씨는 정계에서 완전히 축출되었으며 이후 안동김씨에 의한 세도정치가 시작되었다. Considered is the political situation at the early times of Soon-jo(純祖) age as a transition period from 'Tang-pyung' (蕩平) to 'Se-do'(勢道) reign, while it is observed amid the historical flow of the Cho-sun dynasty. At this time of history, 11 year old Soon-jo came to the throne, leading to 'Soo-ryum-chung-jung' (垂簾聽政) by Empress Jung-soon(貞純王后), which made ways to political debut for Kim's family of Kyung-joo(慶州金氏), the maiden family of the Empress. The demise of the Empress Jung-soon withdrew 'Soo-ryum-chung-jung', and led to the decline of Kyung-joo Kim's power which was to be replaced by 'Andong' Kim's family(安東金氏) of Kim Jo-soon(金祖淳), and finally the historical age turned to the 'Se-do' reign thereafter. The Empress 'Jung-soon' had been chosen as Young-jo(英祖)'s wife, with the intention, by himself, of organizing a stable and balanced cabinet by maiden families' participation in politics at the latter time of his age. Settled up in Choong-chung-do(忠淸道) as the 'Ho-ron'(湖論) lined 'San-rim' family(山林家門), the 'Kyung-joo' Kims, Empress Jung-soon's maiden family, had not been so far seen as one of the political power-parties at that time. But, the royal marriage led to Kims' introduction to and augmentation in their political power, which, at the latter time of Young-jo's age, resulted in their own organization 'Nam-dang'(南黨) as a rival family party to 'Poong-san' Hongs' Hong Bong-han family. So soon after Emperor 'Jung-jo'(正祖) set off his rule, the 'Chuk-shin'(戚臣) power which had been a white elephant during Young-jo age, was ousted from power as well as Empress Jung-soon's maiden family. Meanwhile, Empress Jung-soon made her efforts to preserve and to take care of the royal house ; she chose the second wife, as a harem, for Jung-jo because his first wife, as the empress, did not expect any heirs; she charged 'Eun-un-goon'(恩彦君) as the suspect of the frequent murders in the royal house. She confronted his grandson Jung-jo in punishing Eun-un-goon, putting more gravity on the public justice while Jung-jo was concerned more about the personal breach of faith. When young Soon-jo(純祖) took the King's throne after Jung-jo's demise, the Empress Jung-soon acted her 'Soo-ryum-chung-jung' in accordance with the dynasty's traditional courtesy that a young King's mother or grandmother had to be acting the reign in the custody of the kingdom's security. It was such a temporary and transient form of ruling that there had not been a specific form until the Empress Jung-soon established the systematical and institutional formality in acting Soo-ryun-chung-jung. The items in it reflect that the person who acts Soo-ryum-chung-jung has the power as almighty as the Emperor, which turns out to have been real as the instructions she gave to the cabinet are now analyzed; she participated in many political affairs, especially concerning the appointment of the administrations and ministries; she ordered a lot of instructions on the suppression of 'Sir-hak' movement (a trendy movement for embracing western cultures and knowledges) and the affair of 'Shin-yoo-nyun-hwan-gook'(辛酉年 換局). Her presence in this period provoked the moral motive for the revival of Kyung-joo Kims family and their party of 'Byuk-pa'(僻派), since she praised and justified the loyalty Byuk-pa party had been showing still far. Not only to all the political things mentioned above, as the elder person she also seems to have been devoted to her inherent occupation to preserve and protect the King . Anyway, the power reform in the cabinet and the royal house was unavoidable as Byuk-pa party of Kyung-joo Kims appeared again on the stage backed up by the Empress's Soo-ryum-chung-jung. This party of Kims' family expelled Jung-jo's two close associates, Yoon Haeng-im(尹行恁 and Hong Nak-im(洪樂任) of Poong-san Hongs, and Jung-jo's brother, Eun-un-goon as they raised a coup 'Hwan-kook' in the first year of Soon-jo, and finally entered actually in the political world by getting rid of the party 'Nam-in'. Compared to their own power itself they had in Jung-jo years, it was a really tremendous growth and what is guessed was that the Empress Jung-soon had backed them up to grow by her Soo-ryum-chung-jung. Among the features are Kim Kwan-joo(金觀柱), Kim Eel-joo(金日柱), Kim No-choong(金魯忠), and Kim Myun-joo(金勉柱). The Kims, during those years of the Empress, tried to establish the one-and-only party ruling system, but failed to get consensus of people. And so just after Empress Jung-soon withdrew her Soo-ryum-chung-jung, Kims' power plumped down and finally had to suffer the expulsion from power when the Empress passed away. After the withdrawal, 'Kwon-yoo-ok-sa' (權裕獄事), and 'Byung-in-nyun-hwan-kook'(丙寅年 換局) ousted the Kims thoroughly from the politics and led to the start of Andong Kims' Se-do ruling.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼