
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
심장박동수 측정을 통한 교대근무 항공교통관제사 피로에 관한 연구
박진한 한국항공대학교 항공경영대학원 2016 국내석사
삶의 질이 개선됨에 따라 전 세계 항공수요가 증가하고 있으며 우리나라 항공 수송실적은 4년 연속 6위를 기록하였고 항공교통량은 10년간 연평균 6%이상의 꾸준한 증가추세를 보이고 있다. 항공수요의 증가에 따른 항공 산업의 발전에 가장 우선되어야 하는 것은 항공안전의 보장이다. 이에 있어 주도적인 역할을 수행하는 항공교통관제업무는 인간의 의사결정에 의존하고 있으므로 업무부하에 따른 인적오류가 불가피한 실정이다. 공항/비행장의 24시간 운영을 위해 교대근무를 하는 항공교통관제사는 피로와 긴장이 가중되기 쉬운 환경에서 근무를 하고 있으며, 이는 인간의 인지구조와 판단력에 영향을 미친다. 또한 국제적으로 항공교통관제사의 피로는 사고의 원인 중 하나로 언급되고 있다. 한국의 경우 항공교통관제사의 일주일 평균 근무시간은 50시간, 야간근무시간은 15시간으로 선진국 항공교통관제사에 비해 근무시간이 꽤나 긴 실정으로 국내 항공교통관제사의 피로에 대한 다각적인 연구가 필요하다. 특히 항공교통관제사의 피로의 요인과 피로가 미치는 영향을 정확히 이해하고 제도적 개선이 필요한 부분을 파악하는 것이 항공안전에 있어 중요한 부분이라 할 수 있다. 본 연구에서는 이론 및 선행연구 고찰을 통해 항공교통관제와 인적요소, 피로, 교대근무에 대한 개념을 정립하였고, 객관적으로 밝혀진 항공교통관제사 피로의 요인과 피로가 미치는 영향, 그리고 교대근무자의 특성을 이해하였다. 선행연구를 토대로 업무측면에서 항공교통관제사 피로의 요인으로 관할항공기의 증가, 근무시간의 경과, 기상의 악화를 설정하였다. 특히 피로 측정을 위한 지표로 심장박동수를 설정하였으며 이에 따른 연구가설을 수립하였다. 이어서 설정한 종속변수 즉 심장박동수를 측정하기 위하여 제 19전투비행단 관제탑 소속 교대근무자를 대상으로 근무 중 심장박동수 변화를 측하고 그 자료를 수집·분석하였다. 심장박동수 측정을 위해서 스마트기기와 연동되는 스마트 밴드 2개를 이용하였다. 수집된 데이터를 이용한 가설검증은 SPSS (PASW) 18.0을 활용, 통계적 분석을 통해 수행되었다. 측정에 이용된 두 기기에서 측정된 데이터의 동질성을 검증하기 위하여 t검정을 실시하였다. 관할항공기 대수에 따른 심장박동수의 변화를 알아보기 위하여 일원변량분석(One-way Anova)를 실시하였다. 아울러 동일한 관할항공기 하에 시간의 경과에 따른 심장박동수의 변화와 동일한 관할항공기 하에 기상에 따른 심장박동수의 변화를 알아보기 위하여 t검정을 실시하였다. 실증적 분석결과를 요약하면 다음과 같다. 첫째, 관할항공기의 증가에 따라 항공교통관제사의 심장박동수는 유의하게 증가하였다. 둘째, 관할항공기의 수가 동일하더라도 근무시간의 경과에 따라 항공교통관제사의 심장박동수는 유의하게 증가하였다. 셋째, 기상의 악화는 심장박동수에 유의한 차이를 주지 못하였다. 이러한 분석결과 선행연구를 통해 밝힌 관할항공기 수와 근무시간의 경과는 교대근무 항공교통관제사의 피로요인으로 작용한다는 사실을 실험을 통해 검증할 수 있었다. 따라서 우리나라도 선진국과 같이 교대근무 항공교통관제사의 피로의 중요성을 인지하고 관제사의 피로관리를 위한 현 실태에 맞는 근무형태, 근무시간, 인력충원 방안 등의 제도적 개선이 병행된다면 늘어나고 있는 항공수요에 맞춰 항공안전도 함께 개선될 수 있을 것으로 판단된다.
Forests absorb and store CO2 through photosynthesis, which prevents global warming and provides numerous benefits to forests. In the past, acid rain was the primary danger to forests; more recently, ozone, nitrogen, and sulfur have been threatening forest ecosystems. In particular, ozone occupies most photochemical products, and because of its high toxicity, it directly damages plants. It is also expected that the concentration of air pollutants will increase as a results of future climate change. Korea is expected to see an increase in the concentration of ozone because of the introduction of ozone and ozone precursors from China. The purpose of this study is to understand how 1) ozone affects the net primary productivity of forests and 2) estimate the future net primary productivity of forests affected by a change of ozone and to estimate the damage cost of such changes. To do this, we selected the variables necessary for determining the net primary productivity of forests by classifying variables related to weather, terrain, and atmospheric pollutants and used resources such as satellite images and atmospheric pollution data to measure each variable from 2001 to 2010. Using statistical models, we estimated the difference between the present and future net primary productivity of forests with and without ozone. In order to estimate the extent of future damage, we applied the concept of convenience and the concept of probability. In this study, damage cost is defined by using economic value concept and the definition of ecosystem service; damage cost is estimated for control service, indirect use value, use value, and total economic value. According to the result of the analysis, the average net primary productivity of forests over the past 10 years averaged around 64 million . The non-parametric test confirmed that the net primary productivity of forests, NDVI and ozone concentration differed between regions. Because the NDVI differences were reflected in the analysis, there are no differences reported in the net primary productivity of forests by region in this study’s results. In addition, ozone is responsible for an average of 8.3% of net primary productivity within forests per year. This is expected to range from about 3.2% to about 13.3% in the future. The impact on net primary productivity of forests due to ozone varied depending on the definition utilized for application methodology and measuring damage cost. When the concept of probability is applied only to the regulation service which has a direct relation to the net primary productivity of forests, the minimum value of the damage cost is about 401 billion KRW, and when metric regression is applied to the maximum value by applying the concept of total economic value, the value increases to roughly 4,653 billion KRW. The estimated cost of damage is about 0.3% of the maximum current GDP. The results of this study suggest that there may be a difference of up to 11 times depending on the definition of damage cost and the method used to estimate damage cost. The significance of this study is that the estimation of net primary productivity of forests in the future is reflected not only in climate data but also in the utilized clinical data through NDVI. It is also important to predict ozone concentration based on the emissions rather than to make assumptions utilizing a simple scenario to determine the prediction of ozone concentration. Furthermore, small-scale research that was conducted at the laboratory level was analyzed using actual observational data. We have found that there is a large variation in the definition of damage cost and the methodology applied to estimate potential future benefits and damage costs. This implies that there is a risk of underestimation or overestimation of the effects of certain variables on climate change.
Valuation of olympic park and boramae park by using hedonic price method
The ecosystem provides individuals with a variety of benefits. Parks in particular provide a number of benefits, including recreational, leisure, and educational opportunities. Generally speaking, people are well aware of the value of the benefits that urban parks offer. This study estimates, through the use of hedonic price methods (HPM), the populace’s willingness to pay (WTP) for Olympic Park and Boramae Park in Seoul, South Korea. HPM constitute one type of valuation method for nonmarket goods. All else being equal, individuals generally prefer to live in a house located near a park; this preference is seen in the prices of apartment rentals and real estate. It makes sense, then, that this study would use an HPM model. The dataset used comprises real transaction prices from Sungnae-dong and Sindaebang-dong in 2012, and four function types are used. Variables were chosen after undertaking a literature review and expert interviews. The independent variables include square area of a household, the age of the building (i.e., year of completion), the floor of a household within a building, the number of households in an apartment complex, the distance to the nearest entrance of an elementary school, the distance to the nearest subway station, the distance to the nearest bus stop, whether or not there is a park view from a household, and the distance to the nearest park entrance. The results of regression analyses were as follows. When someone who lives in Sungnae-dong buys a house, the household’s WTP to be 1 m closer to Olympic Park is equal to 1% of the unit price. At the same time, this factor can be considered to have a monetary value: about 1,000 won (KRW) per 1 m closer in the log function regression, and about KRW 2,000 in the linear regression. For Boramae Park, residents who live in Sindaebang-dong assign a WTP value that equals 2% of the unit price of a home; that monetary value is about KRW 2,000 by log function regression and about KRW 3,500 by linear regression. The price of an apartment that has a view of Boramae Park can be as much as 9.5% higher than one that does not. In addition, this study determines mathematically the range of influence of park proximity on an apartment’s value. The value of is 212.42 m (semi-log function of Olympic Park), 337.17 m (log function of Olympic Park), 578.23 m (semi-log function of Boramae Park), and 900.35 m (log function of Boramae Park). These results indicate that the range of influence of Boramae Park is larger than that of Olympic Park. The monetary value of living within the vicinity of one of these two parks is not of significant size. The value is “set” by the users, and so the value of the park relates to accessibility. The study results indicate that Boramae Park is more valuable to those that live in its vicinity than Olympic Park is for its residents. The number of studies that work to quantify ecosystems and their valuations has been increasing worldwide in recent years, largely because the results of quantification and valuation are useful in creating policy that protects or preserves the ecosystem, and in creating parks. This study is about park, ecosystem, and ecosystem services valuation, and about the allocation of greenspace; it makes a significant contribution to the literature, in that its results bear implications with regard to the estimated value of these parks. These figures also allow for comparisons of the value ranges of the two parks.
共同住宅 에어컨 실외기 設置에따른 騷音ㆍ振動 저감에 관한 硏究
朴鎭漢 中央大學校 建設大學院 2000 국내석사
국내에서는 그동안 공동주택 시공시 기후특성상 냉방기가 짧기 때문에 설계시 냉방시스템이 배제되었으나 근래에 국민생활수준의 향상과 이상기후현상인 온난화 현상으로 인해 쾌적한 생활환경에 대한 욕구가 증대되면서 냉방설비 적용이 점차 증가하고 있는 실정이다. 이에 각 관련업계에서는 여러 가지 냉방시스템이 검토되고 있다. 그중에서 경제성 및 시공성, 유지관리 면에서 유리한 개별에어컨 시스템 적용이 현실화 되어가고 있다. 그러나 개별에어컨 설치에 따른 공동주택에서의 소음진동문제를 배제하기란 어렵다고 판단된다 따라서 소음진동발생의 주요요소를 설계 시공 단계에서 저감시킬 수 있는 방안을 측정대상아파트에서 실험을 통해 다음과 같이 제시하였다. (1) 공동주택 각평형별 적정 실외기 위치는 34평형, 62평형 모두 뒷발코니 외부 “C" TYPE이 적정한 것으로 분석되었다. (2) 적정 방진재와 흡음재두께는 고무패드와 25T가 적정한 것으로 평가되었다. (3) 공동주택에서 에어컨의 주요 진동, 소음원으로는 실외기뿐만 아니라 실내기도 동시에 작용하고 있음을 확인하였다. (4) 실험을 통해 측정데이터를 분석한 결과 바닥 최종 마감재의 특성에 따라 진동전파가 달라지는 것을 확인하였으며 이에 대한 연구가 필요하다고 사료된다. (5) 34평형의 경우처럼 바닥마감재가 비닐계 장판지일 경우 실내기 바닥에 POLYURETHANE MAT를 설치하면 초기단계에서 비용이 덜들면서 진동감소 효과를 쉽게 볼 수 있는 방안을 제시하고 적용가능성을 확인할 수 있었다. (6) 공동주택은 주용도인 주침실과 거실이 전면에 배치되어 있어 뒷발코니 외부로 실외기를 설치할 수 있는 전용설치대를 콘크리트 슬라브로 설계시공하여 실외기를 설치하면 진동측면에서는 기초가 안정되어 62평형의 “A" TYPE과 같은 효과를 볼 수 있으며 소음측면에서는 벽에 의한 투과손실효과를 볼 수 있어 세대로 전달되는 소음, 진동을 현저히 저감시킬 수 있다. 이와함께 에어컨 설치시 시공의 편리성과 안전을 고려하여 전용 실외기실쪽 난간은 개방형으로 시공되어야 하며 미관을 고려 설치대 전면에 내구성재질의 루바를 설치 주거공간의 미관문제를 해결할 수 있다. When operating the construction of the tenement house in domestic areas, because the time when air conditioner can be operated is short owing to the characteristics of the local climate, when the drafting work was conducted, the air conditioner system was excluded, but in recent days the improvement of the national quality of life and the warm weather which is the phenomena of the extraordinary weather phenomena increased the desire for the comfortable environment for life, and consequently, recently the usage of devices related with the air conditioner were increased. Thus the related industrial companies are researching various air conditioning systems. Among those air conditioners, the individual air conditioner system application, which is beneficial for the economical aspect, the convenience for construction, and maintenance-administration point, was being realized. However, it is thought that the problem of noise and vibration owing to the establishment of the individual air conditioner in tenement house could not be excluded. Consequently, the way, which enable the main elements of the noise and vibration occurrence to be reduced in the drawing and drafting level, was experimented and then proposed as follows. 1. It is analyzed that the proper position for the outdoor air conditioner device in each size of the tenement house was the outside "C" type in both 34 pyung type, and 62 pyung type. 2. It is evaluated that the adequate thickness of the dustproof materials and the noiseproof should be used by the rubber pad and 25T. 3. When establishing the package air conditioner in the tenement house, as the main vibration and noise element, the fact that the indoor device as well as the outdoor device affect them was confirmed. 4. The result, which analyzed the estimated data through the experiment, enable to confirm that according to the features of the last bottom closing material, the vibration wave changed, and it is thought that the study for those should be researched. 5. As the case of 34 pyung which used the vinyl papered floor as the last bottom closing material, if the polyurethane mat is established in the bottom of the indoor device, it could be proposed the way that the process could easily reduce the initial cost, and reduce the vibration, and the applied possibility could be confirmed. 6. When the bedroom and living room, which are the mainly used rooms of the tenement house level, are located in front of the area, the exclusive shelf, which is drawn and made up of the concrete slave, for establishing which enables the outdoor device to be established in outside of the back balcony, and thus if the outdoor device could be established, in the case of the vibration, the base became stable, consequently those process enables to make the same effects with the "A" type of the 62 pyung type, and in the case of the noise, the transmission-reduction effects could be occurred by the wall and consequently the noise and vibration could be considerably reduced.
박진한 서강대학교 정보통신대학원 2003 국내석사
온라인 광고라고 하면 보통 유선 인터넷 광고를 떠올리기 쉽다. 하지만 유선 인터넷 광고 시장 못지않게 무선 인터넷 광고 시장 및 멀티미디어 동영상 인터넷 광고 시장도 급성장하고 있는 중이다. 따라서 이제 온라인 광고의 정의는 유선 인터넷 광고에다가 무선 인터넷 광고, 동영상 인터넷 광고까지 포함시켜서 생각해야 하는 시점이다. 하지만 현재는 유선 인터넷 광고 관리 시스템과 모바일 광고 관리 시스템 그리고 동영상 인터넷 광고 관리 시스템이 각각 따로 운영되고 있는 상황이다 이렇게 온라인 광고 시장의 다양성과 규모가 커져 가고 있는 상황에서 변화하는 디지털 광고 환경에 부합하는 광고 관리 시스템의 필요성이 점차로 대두되고 있다 본 논문에서 설계된 온라인 통합 광고 관리 시스템은 동영상, 모바일, 유선환경 모두에 적용 가능한 통합 인터페이스와 함께 광고 송출 및 결과보고 기능을 제공하여 운영의 효율성을 제고하였다. 또한 단순히 배너 임프레션과 클릭을 측정하는 데서 더 나아가 광고 캠페인 자체를 Unique User의 파악을 통한 도달율 중심으로 전개할 뿐 아니라 참여한 네티즌의 구매행위까지 분석한다. 이런 기능들은 쿠키데이터를 활용한 고객정보 쿠키 DB를 통해서 구현되었다. 또한 기존의 2-Tier 광고 서버의 애드 매니저와 광고 정보 DB시스템에 성능을 추가하여 고객 정보 매니저와 고객 정보 DB 및 실시간 IP정보 DB까지 추가하여 데이터 처리 속도와 타게팅 능력을 향상 시켰다. 마지막으로 reach와 frequency에 따른 매체비용을 광고 기획 단계에서 미리 예상할 수 있는 미디어 플래닝 기능을 추가하였다. Online advertising has seen dramatic development recently. It was wired internet advertising that was prevailing as the most suitable medium for actualizing online advertising. But the situation is changing greatly due to the development of IT technology. Mobile internet advertising and multimedia streaming advertising are emerging as new trends of online adverting. Since mobile and stream advertising are increasing there market volume, advertising server for wired internet can not handle the digital convergence campaign along. Thus a new advertising management system should be developed in which mobile, stream and wired advertising campaign can be converged with one platform. In this paper, I would like to design a new online advertising management system. This online adverting server can handle the campaign in which mobile media is mixed with wired internet media and internet streaming media at the same time. To implement this system, I used three different kinds of media management server for multi-media handling efficiency and used cookie technology for targeting, frequency, and post activity measurement. Cookie based database can make a precise site usage report for CRM(customer relationship management). To improve the performance, 3-Tier schema is adopted by using IP DB server as middleware and gathered IP information is used for IP targeting and IP based DB cleaning. With this online advertising management system, you can do comprehensive media planning, various targeting, total campaign report and ROI report without any difficulty.
일축스크류압출기를 이용한 폴리카보네이트의 압출에 관한 연구
RTD는 고분자 물질이 압출기내에 머무는 시간의 분포 즉, 얼마나 오랫동안 고온과 고압의 압출기 내를 여행하는가를 나타내는 것이다. 압출기 안에서 고분자가 소비한 시간은 제품의 질에 아주 큰 영향을 미칠 수 있다. 본 연구에서는 엔지니어링 플라스틱 중에서 우수한 광학적 특성과 열적 안정성 그리고 우수한 기계적 물성으로 인하여 다목적으로 이용되고 있는 폴리카보네이트 3종류의 등급을 이용하여 지름이 20mm이고 L/D가 24인 일축스크류압출기에서 온도와 배럴 속도의 변화 및 분자량과 분자구조에 따른 RTD의 변화를 측정하였다. 그 결과 온도와 배럴 속도가 증가함에 따라 선형의 고분자량의 폴리카보네이트만이 RTD가 조금 넓게 분포함을 알 수 있었다. 또한 실험적 RTD와 Tadmor의 이론적 모델과 비교한 결과 선형의 고분자량의 폴리카보네이트가 이론적 모델에 가장 잘 맞는 것으로 나타났다. During the flow through an extruder, fluid elements follow helical paths generated by the relative motion of the screw and barrel surfaces. As a result of this peculiar nonuniform velocity field, different fluid particles have different residence time and undergo different strain and thermal histories. Determination of the residence time distribution(RTD) of the polymer is very important on the product quality. Measurement of residence time distribution by the UV tracer were carried out during this study. The effect of screw speed, barrel temperature, molecular weight and molecular structure on the RTD was examined on three grade polycarbonates. As increase of the screw speed and barrel temperature, just linear polycarbonate of high molecular weight was found to result in a broader distribution. Results obtained from the experiments were compared with Tadmor´s melt extrusion model. It is clear that the linear polycarbonate of high molecular weight better agreement between Tadmor´s melt extrusion model and experimental datum.
Some properties of continuous mappings on topological spaces : 位相空間上에서의 連續寫像들의 性質
本 論文은 位相空間상에서의 寫像들의 性質을 考察하였는데, 제2장에서는 기본적인 性質과 定理를 공부하였고, 제3장에서 이들 寫像들의 性質을 확장시키고, 다음 定理를 誘導證明하었다. 定理 3.3. f가 位相空間X에서 Urysohn空間Y에로의 全單射이면 寫像 f는 開寫像이다. 定理 3.16. f가 位相空間X에서 almost - 正則空間Y에로의 weakly δ - 連續寫像이면 寫像 f는 δ-連續寫像이다. 定理 3.20. f가 nearly-compact 空問X에서 Urysohn空間Y에로의 weakly δ - 連續寫像이면 f는 almost-連續寫像이다. 定理 3.22. f가 位相空間X에서 正則空間Y에서의 寫像이라면 다음은 서로 同値이다. (a) f는 連續寫像이다. (b) f는 δ - 連續寫像이다. (c) f는 weakly δ - 連續寫像이다.