Effectiveness of Computed Tomography for Blow-out Fracture

Rhee, Seung-Hyun,Kim, Tae-Seup,Song, Jae-Min,Shin, Sang-Hoon,Lee, Jae-Yeol Korean Association of Maxillofacial Plastic and Re 2014 Maxillofacial Plastic Reconstructive Surgery Vol.36 No.6

Purpose: This study assessed the association between eye symptoms (enophthalmos or diplopia) and site of damage, volume, deviated inferior rectus muscle (IRM) and type of fracture with computed tomography (CT). The intent is to anticipate the prognosis of orbital trauma at initial diagnosis. Methods: Forty-five patients were diagnosed with fractures of the inferior wall of one orbit. Fracture area, volume of displaced tissue, deviated IRM, and type of fracture were evaluated from coronal CT by one investigator. The association of those variables with the occurrence of eye symptoms (diplopia and enophthalmos) was assessed. Results: Of 45 patients, 27 were symptom-free (Group A) and 18 had symptoms (Group B) of enophthalmos and/or diplopia. In Group B, 12 had diplopia, one was enophthalmos, and five had both. By CT measurement, group A mean area was $192.6mm^2$ and the mean volume was $673.2mm^3$. Group B area was $316.2mm^2$ and volume was $1,710.6mm^3$. The volume was more influential on symptom occurrence. Each patient was categorized into four grades depending on the location of IRM. Symptom occurrence and higher grade were associated. Twenty-six patients had trap-door fracture (one side, attached to the fracture), and 19 had punched-out fracture (both sides detached). The punched-out fracture was more strongly associated with symptoms and had statistically significantly higher area and volume. Conclusion: In orbital trauma, measurement of fracture area and volume, evaluation of the deviated IRM and classification of the fracture type by coronal CT can effectively predict prognosis and surgical indication.

The sequential management of recurrent temporomandibular joint ankylosis in a growing child: a case report

Cho, Jung-Won,Park, Jung-Hyun,Kim, Jin-Woo,Kim, Sun-Jong Korean Association of Maxillofacial Plastic and Re 2016 Maxillofacial Plastic Reconstructive Surgery Vol.38 No.-

Background: Temporomandibular joint (TMJ) ankylosis in children often leads to facial deformity, functional deficit, and negative influence of the psychosocial development, which worsens with growth. The treatment of TMJ ankylosis in the pediatric patient is much more challenging than in adults because of a high incidence of recurrence and unfavorable growth of the mandible. Case report: This is a case report describing sequential management of the left TMJ ankylosis resulted from trauma in early childhood. The multiple surgeries including a costochondral graft and gap arthroplasty using interpositional silicone block were performed, but re-ankylosis of the TMJ occurred after surgery. Alloplastic TMJ prosthesis was conducted to prevent another ankylosis, and signs or symptoms of re-ankylosis were not found. Additional reconstruction surgery was performed to compensate mandibular growth after confirming growth completion. During the first 3 years of long-term follow-up, satisfactory functional and esthetic results were observed. Conclusions: This is to review the sequential management for the recurrent TMJ ankylosis in a growing child. Even though proper healing was expected after reconstruction of the left TMJ with costal cartilage graft, additional surgical interventions, including interpositional arthroplasty, were performed due to re-ankylosis of the affected site. In this case, alloplastic prosthesis could be an option to prevent TMJ re-ankylosis for growing pediatric patients with TMJ ankylosis in the beginning.

Repeated failure of implants at the same site: a retrospective clinical study

Kang, Dong-Woo,Kim, So-Hyun,Choi, Yong-Hoon,Kim, Young-Kyun Korean Association of Maxillofacial Plastic and Re 2019 Maxillofacial Plastic Reconstructive Surgery Vol.41 No.-

Background: Implants are becoming the first choice of rehabilitation for tooth loss. Even though they have a high success rate, failures still occur for many reasons. The objective of this study is to analyze the reasons for recurring failure at the same site and the results of re-implantation. Methods: Thirteen patients (11 males and 2 females, mean age 60 ± 9.9 years) who experienced implant surgery failure at the same site (same tooth extraction area) two or more times in the Department of Oral and Maxillofacial Surgery, Seoul National University Bundang Hospital, between 2004 and 2017 were selected. The medical records on a type, sites, diameter, and length of implants; time and estimated cause of failure; and radiographs were reviewed. Data were collected and analyzed retrospectively, and the current statuses were evaluated. Results: A total of 14 implants experienced failure in the same site more than two times. Twelve implants were placed in the maxilla, while 2 implants were placed in the mandible. The maxillary molar area was the most common site of failure (57.1%), followed by the mandibular molar, anterior maxilla, and premolar areas (14.3% each). The first failure occurred most commonly after prosthetic treatment (35.7%) with an average period of failure of 3.8 months after loading. Ten cases were treated as immediate re-implantation, while the other 4 were delayed reimplantation after an average of 3.9 months. The second failure occurred most commonly after prosthetic treatment (42.9%), with an average of 31 months after loading; during the healing period (42.9%); and during the ongoing prosthetic period (14.3%). In 3 cases (21.4%), the treatment plan was altered to an implant bridge, while the other 11 cases underwent another implant placement procedure (78.6%). Finally, a total of 9 implants (64.3%) survived, with an average functioning period of 60 months. Conclusions: Implants can fail repeatedly at the same site due to overloading, infection, and other unspecified reasons. The age and sex of the patient and the location of implant placement seem to be associated with recurring failure. Type of implant, bone augmentation, and bone materials used are less relevant.

Orthognathic surgery for patients with fibrous dysplasia involved with dentition

Udayakumar, Santhiya Iswarya Vinothini,Paeng, Jun-Young,Choi, So-Young,Shin, Hong-In,Lee, Sung-Tak,Kwon, Tae-Geon Korean Association of Maxillofacial Plastic and Re 2018 Maxillofacial Plastic Reconstructive Surgery Vol.40 No.-

Background: Fibrous dysplasia (FD) is characterized by the replacement of normal bone by abnormal fibro-osseous connective tissue and typically treated with surgical contouring of the dysplastic bone. When dysplastic lesions involve occlusion, not only is surgical debulking needed, orthognathic surgery for correction of dentofacial deformity is mandatory. However, the long-term stability of osteotomized, dysplastic bone segments is a major concern because of insufficient screw-to-bone engagement during surgery and the risk of FD lesion re-growth. Case presentation: This case report reviewed two patients with non-syndromic FD that presented with maxillary occlusal canting and facial asymmetry. Le Fort I osteotomy with recontouring of the dysplastic zygomaticomaxillary region had been performed. The stability of osseous segments were favorable. However, dysplastic, newly formed bone covered the previous plate fixation site and mild bony expansion was observed, which did not influence the facial profile. Including the current cases, 15 cases of orthognathic surgery for FD with dentition have been reported in the literature. Conclusion: The results showed that osteotomy did not appear to significantly reduce the long-term stability of the initial fixation insufficiency of the screw to the dysplastic bone. However, based on our results and those of the others, long-term follow-up and monitoring are needed, even in cases where the osteotomized segment shows stable results.

Powdered Wound Dressing Materials Made from wild Silkworm Antheraea pernyi Silk Fibroin on Full-skin Thickness Burn Wounds on Rats

Kim, Min-Keun,Yoo, Ki-Yeon,Kwon, Kwang-Jun,Kim, Seong-Gon,Park, Young-Wook,Lee, Kwang-Gill,Jo, You-Young,Kweon, Hae-Yong Korean Association of Maxillofacial Plastic and Re 2014 Maxillofacial Plastic Reconstructive Surgery Vol.36 No.3

Purpose: This study evaluated powdered burn wound dressing materials from wild silkworm fibroin in an animal model. Methods: Fifteen rats were used in this experiment. Full-thickness $2{\times}2cm$ burn wounds were created on the back of rats under anesthesia. In the two experimental groups, the wounds were treated with two different dressing materials made from silkworm fibroin. In the Control Group, natural healing without any dressing material was set as control. The wound surface area was measured at five days, seven days and 14 days. Wound healing was evaluated by histologic analysis. Results: By gross observation, there were no infections or severe inflammations through 14 days post-injury. The differences among groups were statistically significant at seven days and 14 days, postoperatively (P<0.037 and 0.001, respectively). By post hoc test, the defect size was significantly smaller in experimental Group 1 compared with the Control Group and experimental Group 2 at seven days postoperatively (P=0.022 and 0.029, respectively). The difference between Group 1 and Group 2 was statistically significant at 14 days postoperatively (P<0.001). Group 1 and control also differed significantly (P=0.002). Group 1 showed a smaller residual scar than the Control Group and Group 2 at 14 days post-injury. Histologic analysis showed more re-epithelization in Groups 1 and 2 than in the Control Groups. Conclusion: Burn wound healing was accelerated with silk fibroin spun by wild silkworm Antheraea pernyi. There was no atypical inflammation with silk dressing materials. In conclusion, silk dressing materials can be used for treatment of burn wound.

Effectiveness of Woven Silk Dressing Materials on Full-skin Thickness Burn Wounds in Rat Model

Lee, Woo-Young,Um, In Chul,Kim, Min-Keun,Kwon, Kwang-Jun,Kim, Seong-Gon,Park, Young-Wook Korean Association of Maxillofacial Plastic and Re 2014 Maxillofacial Plastic Reconstructive Surgery Vol.36 No.6

Purpose: This study evaluated woven silk textile for burn wound dressing materials in an animal model. Methods: Ten rats were used in this experiment. Full-thickness $2{\times}2cm$ burn wounds were created on the back of the rats under anesthesia. In the experimental group, the wounds were treated with three different dressing materials from woven silk textile. In the control group, natural healing without any dressing material was set as control. The wound surface area was measured at five days, seven days, and 14 days. Wound healing was evaluated by histologic analysis. Results: There were no statistically significant differences among groups at five days post injury. The mean defect size at seven days was largest in Group 3 ($462.87mm^2$), and smallest in Group 1 ($410.89mm^2$), not a significant difference (P=0.341). The mean defect size at 14 days was smallest at the Group 3 ($308.28mm^2$) and largest in the control group ($388.18mm^2$), not a significant difference (P=0.190). The denuded area was smaller in Group 1 ($84.57mm^2$) and Group 2 ($82.50mm^2$) compared with the control group ($195.93mm^2$), not statistically significant differences (P=0.066, 0.062). The difference between Group 3 and control was also not statistically significant (P=0.136). In histologic analysis, the experimental groups re-epithelialized more than control groups. No evidence was found of severe inflammation. Conclusion: The healing of burn wounds was faster with silk weave textile more than the control group. There was no atypical inflammation with silk dressing materials. In conclusion, silk dressing materials could be used to treat burn wounds.

Prevalence of considering revision rhinoplasty in Saudi patients and its associated factors

Alsubeeh, Najlaa Abdulrahman,AlSaqr, Mayar Abdulsalam,Alkarzae, Mohammed,Aldosari, Badi Korean Association of Maxillofacial Plastic and Re 2019 Maxillofacial Plastic Reconstructive Surgery Vol.41 No.-

Background: Primary rhinoplasty outcomes may not meet individual expectations. Consequently, reoperation may be advocated to improve results. This study examines the prevalence of individuals considering revision rhinoplasty, while identifying the main cosmetic and functional complaints and factors associated. Methodology: This is a cross-sectional study conducted in Saudi Arabia using a self-reported online questionnaire distributed through social media channels. The sample included 1370 participants who were all Saudi nationals over the age of 16 who had undergone primary rhinoplasty at least 1 year prior. Results: The prevalence of individuals considering revision rhinoplasty was 44.7%. The primary reason for considering it was the desire for further esthetic improvement in an already acceptable result (50.16%). The most common cosmetic complaints subjectively reported were poorly defined nasal tip (32.35%). The most prevalent nasal function symptom was nasal obstruction (56.9%). Significant factors associated with considering revision rhinoplasty included the physician not understanding the patient's complaints, short consultation time, low monthly income, inadequate information about the expected results, not using computer imaging to predict outcomes, lack of rapport with the surgeon, and inadequate information about the risks and complications. Conclusions: A thorough understanding of patient concerns and expectations, as well as thoughtful consideration of risk factors, may help surgeons achieve more successful outcomes and potentially reduce the incidence of revision rhinoplasties. Level of evidence: III.

A Comparative Study of Intermaxillary Fixation and Manual Reduction at Open Reduction and Internal Fixation of Mandibular Fractures

Jin, Soo-Young,Kim, Su-Gwan,Oh, Ji-Su,Kim, Jeong-Sun,Jeong, Mi-Ae Korean Association of Maxillofacial Plastic and Re 2013 Maxillofacial Plastic Reconstructive Surgery Vol.35 No.1

Purpose: The purpose of this study is to evaluate the difference between open reduction and internal fixation (ORIF) and intermaxillary fixation (IMF) of mandibular fractures. Methods: A total of one hundred twenty-seven patients who were treated for mandibular fractures at Chosun University Dental Hospital, from January 2008 to December 2010, and analyzed their prognoses based on the use of IMF at the time of fracture reduction. The patients were divided into two groups; the manual reduction group without IMF and IMF group. Results: After reduction of the mandibular fracture, good results were obtained with majority patients. Nonetheless, seven patients (13.0%) in manual reduction method without arch bars or IMF, developed complications after surgery. Three patients underwent IMF due to occlusal instability after surgery, while one patient underwent re-operation. Thus, a significant difference was not observed between the IMF and manual reduction groups. Conclusion: Manual reduction and IMF at mandibular simple fracture could produce good results. In case of mandibular simple fracture, it was recommended with only manual reduction without IMF or IMF during a short period.

Qualitative correlation between postoperatively increased vertical dimension and mandibular position in skeletal class III using partial-least-square path modeling

Kim, Na-Ri,Park, Soo-Byung,Lee, Jihyun,Choi, Youn-Kyung,Shin, Sang Min,Choi, Yong-Seok,Kim, Yong-Il Korean Association of Maxillofacial Plastic and Re 2017 Maxillofacial Plastic Reconstructive Surgery Vol.39 No.-

Background: This study constructed a partial-least-square path-modeling (PLS-PM) model and found the pathway by which the postsurgical vertical dimension (VD) affects the extent of the final mandibular setback on the B point at the posttreatment stage for the skeletal class III surgery-first approach (SFA). Methods: This study re-analyzed the data from the retrospective study by Lee et al. on 40 patients with skeletal class III bimaxillary SFA. Variables were obtained from cone beam computed tomography (CBCT)-generated cephalograms. Authors investigated all variables at each time point to build a PLS-PM model to verify the effect of the VD on the final setback of the mandible. Results: From PLS-PM, an increase in $VD_{10}$ was found to decrease the absolute value of the final setback amount of the mandible, which reflects the postsurgical physiological responses to both surgery and orthodontic treatment, which, in turn, can be interpreted as an increase in postoperative mandibular changes. Conclusions: To resolve the issue of collinear cephalometric data, the present study adopted PLS-PM to assess the orthodontic treatment. From PLS-PM, it was able to summarize the effect of increased postsurgery occlusal vertical dimension on the increased changeability of the B point position at the posttreatment stage.

Lateral alveolar ridge augmentation procedure using subperiosteal tunneling technique: a pilot study

Kakar, Ashish,Kakar, Kanupriya,Sripathi Rao, Bappanadu H.,Lindner, Annette,Nagursky, Heiner,Jain, Gaurav,Patney, Aditya Korean Association of Maxillofacial Plastic and Re 2018 Maxillofacial Plastic Reconstructive Surgery Vol.40 No.-

Background: In this research article, we evaluate the use of sub-periosteal tunneling (tunnel technique) combined with alloplastic in situ hardening biphasic calcium phosphate (BCP, a compound of β-tricalcium phosphate and hydroxyapatite) bone graft for lateral augmentation of a deficient alveolar ridge. Methods: A total of 9 patients with deficient mandibular alveolar ridges were included in the present pilot study. Ten lateral ridge augmentation were carried out using the sub-periosteal tunneling technique, including a bilateral procedure in one patient. The increase in ridge width was assessed using CBCT evaluation of the ridge preoperatively and at 4 months postoperatively. Histological assessment of the quality of bone formation was also carried out with bone cores obtained at the implant placement re-entry in one patient. Results: The mean bucco-lingual ridge width increased in average from 4.17 ± 0.99 mm to 8.56 ± 1.93 mm after lateral bone augmentation with easy-graft CRYSTAL using the tunneling technique. The gain in ridge width was statistically highly significant (p = 0.0019). Histomorphometric assessment of two bone cores obtained at the time of implant placement from one patient revealed 27.6% new bone and an overall mineralized fraction of 72.3% in the grafted area 4 months after the bone grafting was carried out. Conclusions: Within the limits of this pilot study, it can be concluded that sub-periosteal tunneling technique using in situ hardening biphasic calcium phosphate is a valuable option for lateral ridge augmentation to allow implant placement in deficient alveolar ridges. Further prospective randomized clinical trials will be necessary to assess its performance in comparison to conventional ridge augmentation procedures.