中國古典詩歌中的'情'和'景'

李壯鷹 中國語文硏究會 2001 中國語文論叢 Vol.21 No.-

1.감정과 경물은 시가 창작 중의 두 가지 중요한 요소이며 그 두 가지 요소의 관계에 대한 연구 토론은 중국 고대 시학의 중요한 내용 중 하나이다. 육조 시기의 문학 평론가는 감정과 경물의 관계를 연구 토론할 때 고대의 소박한 물감설(物感說 - 물체와 감정이 완전히 연결되어 있다고 믿는 것)의 영향을 받아 사람의 감정과 자연 경물 사이에 일종의 고정적인 한 몸과도 같은 대응 관계가 존재한다고 여겼다.그들은 사람의 사회성과 주체성을 무시하고 사람을 그저 자연과 계절의 영향을 받는 피동적인 것으로 간주하였다.사실상 사람은 사회성의 주체로서 그 감정의 주요한 내원은 사회 생활에 연유한다.사회 생활과 비교할 때 자연 풍광과 경물의 사람에 대한 영향은 매우 작은 것이다.그러므로 사람들이 같은 계절을 맞을 때 각기 느낌이 다르며 같은 경물을 대면하여서도 느끼는 감정은 같지 않다.당대 이후 사람들은 이 이치에 대한 인식이 갈수록 정확해져 육조 시기 사람들의 단편적인 견해에 대해 바로잡으려는 사람들이 끊이지 않았다. 2.경물을 빌려 감정을 이야기하는 방법은 중국 고대 시가 창작 중 비교적 늦게 일어났다.가장 오래 된 책 중의 하나인 《시경》에서 그 주요한 서정 방식은 아직 경물을 빌려 말하는 것이 아닌 직접적인 감정의 묘사이다.후에 중국 시가가 직접 입으로 부르는 형식에서 점차 문자성 형식으로 변해 감에 따라 묘사는 비로소 서정의 주요한 수단이 되었다.그러나 경물을 빌려 감정을 말하는 시가에서 경물을 묘사하는 것도 물론 중요하지만 이는 그저 감정을 표현하는 것을 도와줄 뿐 감정을 표현하는 것을 대신할 수 없었다.이 때문에 서정시 한 수에서 가슴 속의 뜻을 직접 표현하는 '情語'는 항상 적지 않았으며 비록 시 속에서 사용된 글자가 많지는 않았지만 정해진 감정의 작용을 일으켜 시를 쓸 때 잊을 수 없으며 시를 평가할 때도 소홀히 할 수 없었다.

Physicochemical Properties and Shelf-Life of Regular-Fat Sausages with Various Levels of Grape Tomato Powder Prepared by Different Drying Methods

Zhuang Zhuang Qiu,진구복(Koo Bok Chin) 한국축산식품학회 2020 한국축산식품학회지 Vol.40 No.5

This study was aimed to investigate the physicochemical properties, texture, and antioxidant, and antimicrobial activities of regular-fat sausages (RFSs) mixed with 0.25 and 0.5% of oven-dried and freeze-dried grape tomato powder (GTP, 150 μm) during storage at 4℃. RFSs were made by six treatments that included: control (CTL), REF (sausages with 0.1% ascorbic acid alone), F1GTPSs (F1) and F2GTPSs (F2) (sausages with 0.25% and 0.5% freeze-dried GTP), and O1GTPSs (O1) and O2GTPSs (O2) (sausages with 0.25% and 0.5% GTP oven-dried at 100℃). Sausages with added oven-dried grape tomato powders (OGTPs) showed decreased pH, lightness (L*), total plate count (TPC), and thiobarbituric acid-reactive substances (TBARS) compared to the sausages mixed with freeze-dried GTP (FGTPSs), but also had the highest redness (a*) and yellowness (b*) values among the treatments. With increasing levels of GTP, the hardness and chewiness of the sausages gradually decreased and these were decreased more in the FGTPSs (F) than in the OGTPSs (O). Compared to the FGTPSs, OGTPSs had higher antioxidant and antimicrobial activities, which extend the shelf-life of meat products. Application of OGTP to RFSs resulted in higher lipid antioxidant, antimicrobial activities, improving physicochemical properties and extended the shelf-life.

Physicochemical properties and shelf-life of low-fat pork sausages wrapped with active film manufactured by sodium alginate and cherry tomato powder

Qiu Zhuang Zhuang,진구복 아세아·태평양축산학회 2020 Animal Bioscience Vol.33 No.9

Objective: This study was carried out to investigate physicochemical properties, and antioxidant and antimicrobial activities of low-fat sausages (LFSs) covered with sodium alginate (SA) film alone and with powder film (TSA-film) formed by cross-linking cherry tomato powder (CTP) and SA with calcium chloride (CaCl2). Methods: Sausages covered with the biodegradable film were assessed based on the measurement of pH, color (L*, a*, b*), proximate analysis, expressive moisture (EM), texture profile analysis, total plate counts (TPC), violet red bile, and 2-Thiobarbituric acid reactive substances (TBARS) during storage under refrigeration. LFSs wrapped with TSA-film were compared with those wrapped with SA-film and without film (control) during storage at 10°C for 35 days. Results: The LFSs covered with the mixed film had lower pH, lightness (L*), EM%, TBARS, and TPC, but lower yellowness (b*) and hardness values than those wrapped with TSA-film alone. Conclusion: Lipid oxidation and microbial growth was retarded in sausages covered with biodegradable films, especially multiple films as compared to single film, thereby resulting in extended shelf-life of the LFSs.

Novel DNAH1 Mutation Loci Lead to Multiple Morphological Abnormalities of the Sperm Flagella and Literature Review

Zhuang Bao-Jun,Xu Su-Yun,Dong Liang,Zhang Pei-Hai,Zhuang Bao-Lin,Huang Xiao-Peng,Li Guang-Sen,You Yao-Dong,Chen Di'Ang,Yu Xu-Jun,Chang De-Gui 대한남성과학회 2022 The World Journal of Men's Health Vol.40 No.4

The protein encoded by dynein axonemal heavy chain 1 (DNAH1) is a part of dynein, which regulates the function of cilia and sperm flagella. The mutant of DNAH1 causes the deletion of inner dynein arm 3 in the flagellum, leading to multiple morphological abnormalities of the sperm flagella (MMAF) and severe asthenozoospermia. However, instead of asthenozoospermia and MMAF, the result caused by the mutation of DNAH1 remains unknown. Here we report a male infertility patient with severe asthenozoospermia and teratozoospermia. We found two heterozygous mutations in DNAH1 (c.6912C>A and c.7076G>T) and which were reported to be associated with MMAF for the first time. We next collected and analyzed 65 cases of DNAH1 mutation and found that the proportion of short flagella is the largest, while the bent flagella account for the smallest, and the incidence of head deformity is not high in the sperm of these patients. Finally, we also analyzed 31 DNAH1 mutation patients who were treated with intracytoplasmic sperm injection (ICSI) and achieved beneficial outcomes. We hope our research will be helpful in the diagnosis and treatment of male infertility caused by DNAH1 mutation.

Experimental and Numerical Analysis of A Novel Ceria Based Abrasive Slurry for Interlayer Dielectric Chemical Mechanical Planarization

Yun Zhuang,Leonard Borucki,Ara Philipossian,Eric Dien,Mohamed Ennahali,George Michel,Bernard Laborie,Yun Zhuang,Manish Keswani,Daniel Rosales-Yeomans,Hyosang Lee,Ara Philipossian 한국전기전자재료학회 2007 Transactions on Electrical and Electronic Material Vol.8 No.2

In this study, a novel slurry containing ceria as the abrasive particles was analyzed in terms of its frictional, thermal and kinetic attributes for interlayer dielectric (ILD) CMP application. The novel slurry was used to polish 200-mm blanket ILD wafers on an IC1000TM K-groove pad with in-situ conditioning. Polishing pressures ranged from 1 to 5 PSI and the sliding velocity ranged from 0.5 to 1.5 m/s. Shear force and pad temperature were measured in real time during the polishing process. The frictional analysis indicated that boundary lubrication was the dominant tribological mechanism. The measured average pad leading edge temperature increased from 26.4 to 38.4 °C with the increase in polishing power. The ILD removal rate also increased with the polishing power, ranging from 400 to 4000 A/min. The ILD removal rate deviated from Prestonian behavior at the highest p´V polishing condition and exhibited a strong correlation with the measured average pad leading edge temperature. A modified two-step Langmuir-Hinshelwood kinetic model was used to simulate the ILD removal rate. In this model, transient flash heating temperature is assumed to dominate the chemical reaction temperature. The model successfully captured the variable removal rate behavior at the highest p´V polishing condition and indicates that the polishing process was mechanical limited in the low p´V polishing region and became chemically and mechanically balanced with increasing polishing power.

Performance Evaluation of an Integrated Starter-Alternator with an IPM Synchronous Machine under Sensor-less Operation

Zhuang Xu,M. F. Rahman,G. Wang,Dianguo Xu 전력전자학회 2012 JOURNAL OF POWER ELECTRONICS Vol.12 No.1

This paper presents performance evaluation of an Integrated Starter-Alternator (ISA) prototype with an Interior Permanent Magnet (IPM) synchronous machine under sensor-less operation. To attain a high starting torque at zero speed and in subsequent extremely low speed range, a hybrid signal injection method is proposed. At higher speed, an improved stator flux observer is used for the stator flux estimation. This observer is able to produce accurately-estimated stator flux linkage for high performance Direct Torque and Flux Control (DTFC) implementation. The sensor-less DTFC IPM synchronous machine drive takes full advantage of the capacity of the power converter and fulfills the control specifications for the ISA. The trajectory control algorithm responds rapidly and in a well behaved manner over a wide range of operating conditions. The experimental results verify the feasibility and advantages of the system.

Exploring Synergistic Effect in Metro Station Areas: A Case Study of Shanghai, China

Zhuang, Yu,Zhang, Lingzhu Council on Tall Building and Urban Habitat Korea 2016 International journal of high-rise buildings Vol.5 No.2

In the process of exploring sustainable development, major cities in China are expanding metro systems as a strategy to reduce the negative environmental and social consequences of fast-paced motorization. A metro station is not only a transportation node, but also a place where diverse activities can be performed. Therefore, the realization of the spatial potential for human interaction is the essence of the strategy for integrated development in metro station areas. For this paper, 10 well-developed metro stations in Central Shanghai were selected to investigate the correlation between accessibility and spatial performance in station areas. The spatial performance in station areas is significantly affected by metro configuration. However, both vehicle and pedestrian accessibility show weak influence on spatial performance. A synergistic model was then developed to provide quantitative support for transit-oriented development in metro station areas.

Properties of a Fibrinolytic Enzyme Secreted by Bacillus amyloliquefaciens RSB34, Isolated from Doenjang

( Zhuang Yao ),( Xiaoming Liu ),( Jae Min Shim ),( Kang Wook Lee ),( Hyun-jin Kim ),( Jeong Hwan Kim ) 한국미생물 · 생명공학회 2017 Journal of microbiology and biotechnology Vol.27 No.1

Nine bacilli with fibrinolytic activities were isolated from doenjang, a traditional Korean fermented soy food. Among them, RSB34 showed the strongest activity and was identified as Bacillus amyloliquefaciens by 16S rRNA and recA gene sequencing. During growth on LB up to 96 h, RSB34 showed the highest fibrinolytic activity (83.23 mU/μl) at 48 h. Three bands of 23, 27, and 42 kDa in size were observed when the culture supernatant was analyzed by SDSPAGE and 27 and 42 kDa bands by fibrin zymography. The gene encoding the 27 kDa fibrinolytic enzyme AprE34 was cloned by PCR. BLAST analyses confirmed that the gene was a homolog to genes encoding AprE-type proteases. aprE34 was overexpressed in Escherichia coli BL21(DE3) using pET26b(+). Recombinant AprE34 was purified and examined for its properties. The K_m and V_max values of recombinant AprE34 were 0.131 ± 0.026 mM and 16.551 ± 0.316 μM/l/min, respectively, when measured using an artificial substrate, Nsuccinyl- ala-ala-pro-phe-p-nitroanilide. aprE34 was overexpressed in B. subtilis WB600 using pHY300PLK. B. subtilis transformants harboring pHYRSB34 (pHY300PLK with aprE34) showed higher fibrinolytic activity than B. amyloliquefaciens RSB34.

Preparation and Drug Release Behavior of Tussah Silk Fibroin Composite Membrane

Zhuang Hu,Kaixia An,Jia Wang,Xiaoxu Xu,Zhangpei Chen,Jianshe Hu,Liqun Yang 한국섬유공학회 2020 Fibers and polymers Vol.21 No.2

Silk fibroin (SF) aqueous solution was obtained by the degumming and dissolution of tussah silk, and then the obtained solution was chemically cross-linked with sodium alginate (SA) to form composite membrane, which could be used as a carrier for sustained drug release. The mechanical properties and dissolution rate of such composite membrane togetherwith the drug release behavior under different conditions were investigated. A series of structure-tunable composite membranes were prepared through altering the ingredients proportion, the pH value during fabrication, the concentration of Ca2+, and cross-linking time. The drug release behavior of the corresponding drug-loaded composite membrane was elaborate studied using artemisinin as the model drug. It was found that the drug release rate exhibited a decreasing trend with increasing the SF content, the Ca2+ concentration and the cross-linking time of the corresponding composite membrane. Moreover, the drug release behavior exhibited pH sensitivity, and the drug release rate could be promoted under weak alkaline conditions.

Localized deformation in sands and glass beads subjected to plane strain compressions

Zhuang, Li,Nakata, Yukio,Lee, In-Mo Techno-Press 2013 Geomechanics & engineering Vol.5 No.6

In order to investigate shear behavior of granular materials due to excavation and associated unloading actions, load-controlled plane strain compression tests under decreasing confining pressure were performed under drained conditions and the results were compared with the conventional plane strain compression tests. Four types of granular material consisting of two quartz sands and two glass beads were used to investigate particle shape effects. It is clarified that macro stress-strain behavior is more easily influenced by stress level and stress path in sands than in glass beads. Development of localized deformation was analyzed using photogrammetry method. It was found that shear bands are generated before peak strength and shear band patterns vary during the whole shearing process. Under the same test condition, shear band thickness in the two sands was smaller than that in one type of glass beads even if the materials have almost the same mean particle size. Shear band thickness also decreased with increase of confining pressure regardless of particle shape or size. Local maximum shear strain inside shear band grew approximately linearly with global axial strain from onset of shear band to the end of softening. The growth rate is found related to shear band thickness. The wider shear band, the relatively lower the growth rate. Finally, observed shear band inclination angles were compared with classical Coulomb and Roscoe solutions and different results were found for sands and glass beads.