Effects of Y₂O₃ additions on the oxygen diffusion in top-seeded melt growth processed YBa₂Cu₃O_7-y superconductors

Jun, B.H.,Jung, S.A.,Park, S.D.,Park, B.J.,Han, Y.H.,Kim, C.J. North-Holland 2011 Physica. C, Superconductivity Vol.471 No.21

To understand the effect of Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211)/YBa<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>7-y</SUB> (Y123) interfaces on the oxygen diffusion in single grain YBa<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>7-y</SUB> superconductors, single grain Y123 superconductors with 0.05 and 0.3moles of Y<SUB>2</SUB>O<SUB>3</SUB> additions were fabricated by a top-seeded melt growth (TSMG) process. Y123 compacts with Y<SUB>2</SUB>O<SUB>3</SUB> additions were subjected to melt growth heating cycles with a cooling rate of 1<SUP>o</SUP>C/h through a peritectic temperature (1015<SUP>o</SUP>C) and then annealed at 450<SUP>o</SUP>C for 200h in flowing oxygen. The superconducting temperature (T<SUB>c</SUB>) and critical current density (J<SUB>c</SUB>) were estimated for the three different regions (top surface (s), intermediate (i) and center (c)) of samples. The amount of Y211/Y123 interface area in single grain Y123 superconductors was successfully controlled by Y<SUB>2</SUB>O<SUB>3</SUB> additions. The T<SUB>c</SUB> values of s regions were higher than those of i and c regions, which indicates the presence of more oxygen at the sample surfaces. In addition, the T<SUB>c</SUB> values of i and c regions of the Y123 sample with 0.3mole Y<SUB>2</SUB>O<SUB>3</SUB> addition were higher than those of the same regions of the Y123 sample with 0.05mole Y<SUB>2</SUB>O<SUB>3</SUB> addition due to the promoted oxygen diffusion through Y211/Y123 interfaces and other related defects. In spite of the promoted oxygen diffusion by Y<SUB>2</SUB>O<SUB>3</SUB> addition, the large T<SUB>c</SUB> difference among the regions still existed, which suggests sluggish oxygen diffusion into single Y123 grains.

돼지 卵子의 透明帶에 대한 單一클론抗體生産과 그 特性에 關한 硏究

金鐘培,劉永春,金昌圭,權五中,鄭盛元,鄭吉生 건국대학교 동물자원연구센터 1991 動物資源硏究誌 Vol.16 No.-

本 試驗은 單一클론抗體의 강한 特異性과 抗體性質의 不變性을 이용하여 發生學的 側面에서 哺乳動物 卵子의 透明帶의 機能과 構造를 이해하고, 또한 種特異的인 精子 受容體의 存在 및 生化學的 構造를 규명하기 위한 기초연구로서, 돼지 卵子의 透明帶를 免疫原으로 하여 BABL/c 생쥐로부터 單一클론抗體를 생산하고 그 특성을 구명하였던 바 다음과 같은 결과를 얻었다. 1) 3마리의 BABL/c 생쥐(YⅠ, YⅡ, ZI)에 돼지卵子의 透明帶를 免疫化하고, 複合抗體 生成을 확인한 후 생쥐의 脾臟細胞와 Myeloma(SP2/O-Ag14)를 polyethylene glycol를 融合을 실시한 결과 각각 25.8%, 54.5% 그리고 59.7%의 融合效率을 나타내었으며, ELISQ에 의해 陽性反應을 조사한 결과 각각 17.3%, 32.6% 그리고 6.2% 陽性反應 效率을 나타내었다. 2) YI에서 강한 陽性反應을 보인 6개의 well에 대한 cloning을 실시하고 抗體檢證을 행한 결과 20.8% ∼ 48.4%의 Cloning效率과 54.6% ∼ 82%의 陽性反應 效率을 나타내었다. 3) 강한 陽性反應을 나타낸 항체에 대해 sandwich ELISA法에 의해 isotype을 決定하였던바 2E93C(YⅠ), 3E83E7(YⅠ), 4E3(YⅡ)각각 IgG₂b, IgG₂a, IgM으로 확인되었다. 4) Isotype이 決定된 2E93C9(YⅠ), 3E84E7(YⅠ), 4E3(YⅡ)의 세포를 생쥐의 腹腔에 주사하여 얻은 腹水를 indirect ELISA法에 의해 titer를 決定한 결과 모두 1:400,000 이상의 높은 titer를 나타내었다. 5) 處理區로서 單一클론抗體의 腹水와 對照區로서 normal mouse serum이 각각 2%씩 함유된 배양액속에서 난자를 배양한 후 顯徵鏡下에서 관찰했을 때 對照區에서 배양된 난자의 표면은 정상적인 형태를 나타냈으나 處理區에서 배양된 卵子는 표면에 뚜렷한 沈澱層을 형성하였다. 6) 處理區와 對照區 卵子를 Rabbit anti-mouse IgG-FITC가 1% 함유된 배양액속에서 배양하고 洗滌한 후 螢光顯徵鏡下에서 관찰한 바 處理區의 卵子는 透明帶 주위에서 螢光이 나타났으나, 對照區에서는 나타나지 않았다. This study was carried out ot produce and characterize monoclonal antibodies against porcine zona pellucida, and undertaken as a basic study to develop immunocontraceptive vaccine and to investigate the function of zana pellucida in early fertilization process. The results obtained were summarized as follows: 1. Spleen cells of three BALB/C mice(YⅠ, YⅡ and ZI) which were immunized with porcine zona pelucida were fused with myeloma cells(SP2/O-Ag14) by polyethylene glycol. At the result of fusion, fusion efficiency was 25.8 , 54.5% and 59.7% and positive efficiency 17.3%, 32.6% and 6.2%, respectively. 2. Cloning efficiency was shown to be from 20.8% to 48.4% and positive efficiency of them were 54.6% to 82%. 3. Sub-isotypes of three strong positive antibodies, 2E93C(YⅠ), 3E83E7(YⅠ) and 4E3(YⅡ) were determined by sandwich ELISA method and shown to be as IgG2b, IgH2a and IgM, respectively. 4. The titers of three ascitic fluids containing antibodies, 2E93C9(YⅠ), 3E84E7(YⅠ) and 4E3(YⅡ) were determined by indirect ELISA and all of them showed above 1:400,000. 5. The layer of precipitate was observed on the zona incubated with medium containing 2% ascitic fluid of monoclonal antibody while the eggs treated with 2% normal mouse serum did not. 6. Porcine eggs incubated with medium containing 2% ascitic fluid of monoclonal antibody and followed by subsequent incubation with Rabbit anti-mouse IgG-FITC conjugate showed strong fluorescent light on the zona surface while the zona of normal mouse serum-treated eggs did not show fluorescence.

Effects of calcium doping on the superconducting properties of top-seeded melt growth processed Y_1.5Ba_2-xCa_xCu₃O_y superconductors

Park, S.D.,Kim, H.J.,Park, B.J.,Han, Y.H.,Jun, B.H.,Lee, J.S.,Kim, C.J. North-Holland 2011 Physica. C, Superconductivity Vol.471 No.21

The effect of calcium doping on the superconducting properties of top seeded melt growth (TSMG) processed Y<SUB>1.5</SUB>Ba<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>y</SUB> superconductors was studied in terms of calcium content (X<SUB>ca</SUB>). YBa<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>7-δ</SUB> (X<SUB>ca</SUB>=0, 0.005, 0.01, 0.02, 0.04, 0.1, 0.3) powders were synthesized by the powder calcination method. YBa<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>7-δ</SUB> powders were mixed with 0.25mole Y<SUB>2</SUB>O<SUB>3</SUB> powder and 1wt.% CeO<SUB>2</SUB> as Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211) refiner, and finally made into Y<SUB>1</SUB>.<SUB>5</SUB>Ba<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>y</SUB> (Y1.5)+1wt.% CeO<SUB>2</SUB> composition. The single Y123 growth on the top surface was observed up to X<SUB>ca</SUB>=0.1, while the multiple Y123 growth was observed at X<SUB>ca</SUB>≥0.1. The superconducting transition temperature (T<SUB>c</SUB>) and critical current density (J<SUB>c</SUB>) of TSMG processed Y1.5 samples were inversely proportional to X<SUB>ca</SUB>. The Y211 size increased with increasing X<SUB>ca</SUB> due to the enhancement of Y211 coarsening by calcium doping. No Y211 refining effect by CeO<SUB>2</SUB> was observed in the calcium doped samples. The T<SUB>c</SUB> and J<SUB>c</SUB> decrease by calcium doping are likely to be due to the calcium incorporation with the Y123 lattice and formation of coarse Y211 particles.

TmSR-C, scavenger receptor class C, plays a pivotal role in antifungal and antibacterial immunity in the coleopteran insect Tenebrio molitor

Kim, S.G.,Jo, Y.H.,Seong, J.H.,Park, K.B.,Noh, M.Y.,Cho, J.H.,Ko, H.J.,Kim, C.E.,Tindwa, H.,Patnaik, B.B.,Bang, I.S.,Lee, Y.S.,Han, Y.S. Pergamon Press ; Elsevier Science Ltd 2017 Insect biochemistry and molecular biology Vol.89 No.-

Scavenger receptors (SRs) constitute a family of membrane-bound receptors that bind to multiple ligands. The SR family of proteins is involved in removing cellular debris, oxidized low-density lipoproteins, and pathogens. Specifically, class C scavenger receptors (SR-C) have also been reported to be involved in phagocytosis of gram-positive and -negative bacteria in Drosophila and viruses in shrimp. However, reports are unavailable regarding the role of SR-C in antifungal immune mechanisms in insects. In this study, a full-length Tenebrio molitor SR-C (TmSR-C) sequence was obtained by 5'- and 3'-Rapid amplification of cDNA ends-polymerase chain reaction (RACE-PCR). The TmSR-C full-length cDNA comprised 1671 bp with 5'- and 3'-untranslated regions of 23- and 107-bp, respectively. TmSR-C encodes a putative protein of 556 amino acid residues that is constitutively expressed in all tissues of late instar larvae and 2-day-old adults, with the highest transcript levels observed in hemocytes of larvae and adults. TmSR-C mRNA showed a 2.5-fold and 3-fold increase at 24 and 6 h after infection with Candida albicans and β-glucan, respectively. Immunoassay with TmSR-C polyclonal antibody showed induction of the putative protein in the cytosols of hemocytes at 3 h after inoculation of C. albicans. RNA interference (RNAi)-based gene silencing and phagocytosis assays were used to understand the role of TmSR-C in antifungal immunity. Silencing of TmSR-C transcripts reduced the survivability of late instar larvae at 2 days post-inoculation of C. albicans, Escherichia coli, or Staphylococcus aureus. Furthermore, in TmSR-C-silenced larvae, there was a decline in the rate of microorganism phagocytosis. Taken together, results of this study suggest that TmSR-C plays a pivotal role in phagocytosing not only fungi but also gram-negative and -positive bacteria in T. molitor.

Regulation of cancer cell death by a novel compound, C604, in a c-Myc-overexpressing cellular environment

Jo, M.J.,Paek, A.R.,Choi, J.S.,Ok, C.Y.,Jeong, K.C.,Lim, J.H.,Kim, S.H.,You, H.J. North-Holland ; Elsevier Science Ltd 2015 european journal of pharmacology Vol.769 No.-

<P>The proto-oncogene c-Myc has been implicated in a variety of cellular processes, such as proliferation, differentiation and apoptosis. Several c-Myc targets have been studied; however, selective regulation of c-Myc is not easy in cancer cells. Herein, we attempt to identify chemical compounds that induce cell death in c-Myc-overexpressing cells (STF-cMyc and STF-Control) by conducting MTS assays on approximately 4000 chemical compounds. One compound, C604, induced cell death in STF-cMyc cells but not STF-Control cells. Apoptotic proteins, including caspase-3 and poly(ADP-ribose) polymerase (PAPP), were cleaved in C604-treated STF-cMyc cells. In addition, 5W620, HCT116 and NCI-H23 cells, which exhibit higher basal levels of c-Myc, underwent apoptotic cell death in response to C604, suggesting a role for C604 as an inducer of apoptosis in cancer cells with c-Myc amplification. C604 induced cell cycle arrest at the G2/M phase in cells, which was not affected by apoptotic inhibitors. Interestingly, C604 induced accumulation of c-Myc and Cdc25A proteins. In summary, a chemical compound was identified that may induce cell death in cancer cells with c-Myc amplification specifically through an apoptotic pathway. (C) 2015 Elsevier B.V. All rights reserved.</P>

Chlortetracycline 과 비닐포장처리에 의한 토육의 상온저장시험

이용빈,송계원,고준수 한국축산학회 1965 한국축산학회지 Vol.7 No.1

The shelf-life of cony meat was studied out in this experiment. After the rabbit dressed out, the meat was treated with 10 p.p.m. Chlortetracycline (C.T.C.) solution and packed with polyethylene. The samples were taken from the muscle of the rump and the round. We allotted eight treatments: That is, two temperature levels (5℃ and 20℃) that have two treatments: Control and C.T.C.-Treated. And each treatment of each temperature levels has two treatments, Control and Packed with Polyethylene. The items investigated are the change of the number of microorganisms, pH, and methylene blue reducing time. The results are as follows: 1. Effectively, C.T.C. suppressed the increasing of microorganisms of cony meat during the storage. And there was highly significant difference at 1.0% level in the C.T.C.-Treated meats on the Ist day of storage. The number of microorganism reached 10^8 per gram in 20℃-Control by the 2nd day of storage and 10^8 per gram by the 7th day of storage. 2. The increasing of yeasts was apparent in 20℃-C.T.C.-Treated on the 5th and 6th day of storage. And on the 7th day of storage, molds were also found. 3. Polyethylene packing was effective (significant at 5.0%) on the 2nd, 3rd, 4th, and 5th day of storage in 5℃-Control, and on the 2nd, 3rd day of storage in 20℃-C.T.C.-Treated. 4. The pH of cony meat during storage was lower in 20℃-C.T.C.-Treated by the 4th day of storage than in 5℃-Control, but after 5th day of storage, the pH of meat. was increased rapidly. 5. The C.T.C. treatment has a more strong effect upon the change of pH of cony meat than the polyethylene packing throughout the storage. And the effect of the temperature was greater than that of C.T.C.-Treatment. 6. C.T.C.-Treatment has shorten methylene blue reducing time than control (significant at 1.0%). And the methylene blue reducing time of 20℃-C.T.C.-Treated was similart to that of 5℃-Control all throughout the experiment period. 7. Polyethylene packing has an effect upon the methylene blue reducing time on the 3rd, 4th day of storage (significant at 5.0%). In the testing of L.S.D., there was no significant differences throughout the period.

Particle distribution in melt-processed Y_1.5 Ba₂Cu₃O_x superconductors with BaCeO₃ addition

Youn, J.S.,No, K.,Kim, Y.H.,Mahmood, A.,Jun, B.H.,Han, Y.H.,Sung, T.H.,Kim, C.J. North-Holland 2009 Physica. C, Superconductivity Vol.469 No.15

To understand the effect of BaCeO<SUB>3</SUB> on a Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211) distribution, Y<SUB>1.5</SUB>Ba<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>x</SUB> (Y1.5) superconductors with/without 1wt.% BaCeO<SUB>3</SUB> additions were prepared by a top-seeded melt-textured growth (TSMG) process. Two different BaCeO<SUB>3</SUB> powders (as-synthesized (coarse powder) and an attrition-milled (fine powder)) were used and the size effect was compared with that obtained from a Y1.5 sample with no addition. A refinement of the Y211 particles was achieved for both the as-synthesized and attrition-milled BaCeO<SUB>3</SUB> additions. The distribution of the Y211 particles was most uniform in the Y1.5 sample prepared with the attrition-milled BaCeO<SUB>3</SUB> powder due to the reduced size of the Y211-free regions by the fine size BaCeO<SUB>3</SUB> addition. The highest J<SUB>c</SUB> was achieved in the Y1.5 sample prepared with the attrition-milled BaCeO<SUB>3</SUB> powder. The J<SUB>c</SUB> result agreed well with the microstructure variations by the addition of BaCeO<SUB>3</SUB> powders.

Microstructural evolution and tensile properties of oxide dispersion strengthened Alloy 617 at elevated temperatures

Chun, Y.B.,Mao, X.,Han, C.H.,Jang, J. Elsevier Sequoia 2017 Materials science & engineering Structural materia Vol.706 No.-

<P><B>Abstract</B></P> <P>This study investigated evolution of the microstructure of oxide dispersion strengthened Alloy 617 with annealing temperature. A mixture of prealloyed Alloy 617 and Y<SUB>2</SUB>O<SUB>3</SUB> powders was mechanically alloyed and consolidated by hot-extrusion at 1100°C. Hot extrusion developed a submicron-sized grain structure with M<SUB>23</SUB>C<SUB>6</SUB> carbides and finely dispersed Al<SUB>2</SUB>O<SUB>3</SUB> and Y<SUB>2</SUB>Ti<SUB>2</SUB>O<SUB>7</SUB> oxides. The fine-grained structure was stable during subsequent annealing at temperatures up to 1250°C. Further increase of annealing temperature to 1300°C resulted in a significantly coarsened grain structure, which was coincident with the abrupt coarsening of oxides. M<SUB>23</SUB>C<SUB>6</SUB> carbides in the as-extruded conditions were transformed to M<SUB>7</SUB>C<SUB>3</SUB> carbides with complex shapes when annealed at 1200°C, and their shapes changed to very coarse hexagonal prisms at 1250°C, which was followed by the formation of eutectic M<SUB>2</SUB>C carbides at grain boundaries at 1300°C. Tensile tests of the as-extruded ODS Alloy 617 showed that the yield strength decreased steeply at a transition temperature of around 600°C, which can be attributed to diffusional creep along the grain boundaries.</P>

열처리에 따른 Y₂O₃박막의 미세 구조 변화와 전기적 특성 변화에 대한 고찰

정윤하(Y. H. Jung),강성관(S. K. Kang),김은하(E. H. Kim),고대홍(D. H. Ko),조만호(M. H. Cho),황정남(C. N. Whang) 한국진공학회(ASCT) 1999 Applied Science and Convergence Technology Vol.8 No.3(1)

p-type Si (100) 기판 위에 습식 산화법으로 SiO₂ 층을 형성한 후, Ionized Cluster Beam(ICB) 증착 방법으로 200 Å 두께의 Y₂O₃ 박막을 증착 하였다. Y₂O₃ 박막이 증착 된 시편을 산소, 아르곤 분위기에서 열처리한 후, Atomic Force Microscopy(AFM)과 Transmission Electron Microscopy(TEM)을 사용하여 Y₂O₃ 박막의 표면과 계면을 관찰하였다. 열처리를 수행한 후 Y₂O₃ 박막과 Si 기판 사이에서 SiO₂층이 성장하고, 이트륨실리 케이트 층이 형성되는 것을 관찰할 수 있었다. 산소 분위기에서 열처리를 수행한 시편의 Y₂O₃ 박막 표면을 관찰한 결과, 표면 상부에 아르곤 분위기에서 열처리한 시편에서는 보이지 않았던 새로운 상이 형성되었음을 알 수 있었다. 또한 전기적 특성을 측정하기 위하여 Al/Y₂O₃/p-type Si (100) 의 캐패시턴스-전압 특성을 관찰하였고, 그 결과 Y₂O₃ 박막의 유전 상수 값이 약 9정도임을 알 수 있었다. We investigated the interfacial reactions between the Y₂O₃ film deposited by ICB processing and p-type (100) Si substrates upon annealing treatments in O₂ and Ar gas ambients. We also investigated the evolution of surface morphology of ICB deposited Y₂O₃ films upon annealing treatments. We observed that the root-mean-square (RMS) value of surface roughness measured by AFM increased with annealing time at 800℃ in O₂ ambient, while the change of surface roughness was not observed in Ar ambient. We also found the growth of SiO₂ layer and the formation of yttrium silicate layer. From the capacitance values (C_(acc)) measured by C-V measurements, the relative dielectric constant of Y₂O₃ film in metal-insulator-semiconductor (MIS) structure was estimated to be about 9.

Measurements of surgeons’ exposure to ionizing radiation dose: comparison of conventional and mini C-arm fluoroscopy

Sung, K. H.,Min, E.,Chung, C. Y.,Jo, B. C.,Park, M. S.,Lee, K. SAGE Publications 2016 The journal of hand surgery. journal of the Britis Vol.41 No.3

<P>This study was performed to measure the equivalent scattered radiation dose delivered to susceptible organs while simulating orthopaedic surgery using conventional and mini C-arm fluoroscopy. In addition, shielding effects on the thyroid, thymus, and gonad, and the direct exposure delivered to the patient's hands were also compared. A conventional and mini C-arms were installed in an operating room, and a hand and an operator phantom were used to simulate a patient's hand and a surgeon. Photoluminescence dosimeters were used to measure the equivalent dose by scattered radiation arriving at the thyroid, thymus, and gonad on a whole-body phantom in the position of the surgeon. Equivalent scattered radiation doses were measured in four groups: (1) unshielded conventional C-arm group; (2) unshielded mini C-arm group; (3) lead-shielded conventional C-arm group; and (4) lead-shielded mini C-arm group. Equivalent scattered radiation doses to the unshielded group were significantly lower in the mini C-arm group than those in the conventional C-arm group for all organs. The gonad in the lead-shielded conventional C-arm group showed the highest equivalent dose among operator-susceptible organs, and radiation dose was reduced by approximately 96% compared with that in the unshielded group. Scattered radiation was not detected in any susceptible organ in the lead-shielded mini C-arm group. The direct radiation dose to the hand phantom measured from the mini C-arm was significantly lower than that measured from the conventional C-arm. The results show that the equivalent scattered radiation dose to the surgeon's susceptible organs and the direct radiation dose to a patient's hand can be decreased significantly by using a mini C-arm rather than a conventional C-arm. However, protective lead garments, such as a thyroid shield and apron, should be applied to minimize radiation exposure to susceptible organs, even during use of mini C-arm fluoroscopy.</P>