http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
文學龍,裵正烈,황인성,한천구 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1(구조계)
This study is to investigate the influence of W/C and fineness modulus of aggregate on the bleeding of concrete. According to the result, the lower W/C is, the less bleeding occurs. As for the properties of bleeding with the variation of fineness modulus, the amount of bleeding is small with the continuous grading in the middle of the standard grading range in the case of coarse aggregate, and it grows smaller with a decrease of fineness modulus in the case of fine aggregate. Therefore, it proves that using coarse aggregate with the continuous grading in the middle of the standard grading range and fine aggregate with smaller fineness modulus in the standard grading range is the effective method for reducing bleeding at the same W/C.
시멘트의 분말도 변화에 따른 시멘트 모르터의 역학적 특성
文學龍,김경민,전충근,윤기원,양성환,한천구 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2
This study discusses the influence of fineness of cement on mechanical properties of cement mortar. According to the result, compressive strength increases in order of C>B>OPC>A and C>B>A>OPC at mixture proportion of 1:1 and 1:3 respectively. An increase of compressive strength by increase of fineness of cement is because internal structure of concrete grows dense by an increase of hydration reaction. As for curing condition, compressive strength is higher in standard curing than in air curing at mixture proportion of 1:1 and 1:3. There is not any tendency of strength development with age and fineness of cement by 91days. Length change by drying shrinkage increases in order of C>B>OPC>A at mixture proportion of 1:1 and 1:3 due to an increase of water content by variation of W/C.
회수수에 처리되는 당류계 안정화제의 혼입률 변화가 콘크리트의 품질에 미치는 영향
文學龍,金虎林,우종완,한민철,한천구 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)
The objective of present paper is to investigate the engineering properties of concrete using recycling water incorporating saccharic based stabilizing agent in order to improve qualities of concrete in the region of normal strength and high strength. According to test results, fluidity and air content do not exhibit significant difference with an increase in stabilizing agent contents. Bleeding was not observed at 30% of W Ie, regardless of stabilizing agent contents, nonetheless, concrete with stabilizing agent of 0.15% was observed to occur the least bleeding at 40 and 50% of W IC. For setting time, although presence of recycled water accelerates setting time, setting time shows to be retarded gradually with an increase in stabilizing agent content. For compressive strength, use of stabilizing agent enhanced compressive strength of concrete compared with that of concrete without stabilizing agent. In the side of strength enhancement, adequate dosage of stabilizing agent is found to be 0.15%. As dosage of stabilizing agent increased above 0.15%, drying shrinkage exhibited a tendency to decrease.
콘크리트의 블리딩에 미치는 시멘트 제조사 및 분말도의 영향
金恩浩,文學龍,황인성,한천구 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1(구조계)
This study is to investigate the influence of the manufacturing company and fineness of cement on bleeding of concrete. According to the results, as fineness of comment increases, slump and air content of fresh concrete decrease, and setting time is shortened. The amount of bleeding abates with an increase of fineness, and it is confirmed that bleeding does not occur especially in the case of B8000. it is confirmed that bleeding does not occur. Bleeding speed is higher in the case of OPC A than in the case OPC B, and grows low with an increase of fineness. It also becomes highest at about 60 minutes, and shows slow tendency in W/C of 45% in comparison with W/C of 50%. And It is confirmed that relativity between fineness of cement and the final amount of bleeding is very favorable. As the properties of hardened concrete, compressive strength do not make much difference between OPC A and B is little, and increases with an increase of fineness.
황인성,文學龍,金光華,한천구 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.1(구조계)
This study is to investigate the influence of contents of mineral admixture on bleeding of concrete. According to the results, as W/B increases, bleeding occurs rapidly at early age regardless of replacement of mineral admixture, and when slump and air content are kept equal, the amount of bleeding decreases proportionately with an increase of replacing ratio of fly ash and blast furnace slag powder. Bleeding speed is highest at 60 minutes after placing concrete, and grow slower after 180 minutes. Bleeding speed also grows high with an increase of W/B, and is lower in the case of fly ash than in the case of blast furnace slag powder.
운반시간 지연에 의해 저하된 레미콘의 성능회복에 관한 기초적 연구
전충근,文學龍,황인성,양성환,한천구 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)
In this paper, availability of deteriorated remicon due to delaying delivery time is discussed. According to test results, fluidity and air content of plain concrete exhibited a tendency to decline with a elapse of time. After 90 minutes since mixed, use of superplasticizer and AE admixture resulted in an increase in fluidity and air content. Adequate dosage of superplasticizer and AE adimixture is found to add with 0.4% and 0.002% respectively to restore the level of original slump and air content from loss one. Setting time of concrete exhibited an acceleration with an increase in leaving time of concrete. Compressive strength of plain concrete is enhanced with and increase of leaving time of concrete. Therefore, it is found that the use of superplasticizer with 0.4% and AE admixture with 0.002% has a desirable effect on restoring the deteriorated quality of concrete related to fluidity, air content and setting time without strength loss caused by delivery time delaying.
Induction of Apoptosis by IGFBP3 Overexpression in Hepatocellular Carcinoma Cells
Han, Jian-Jun,Xue, De-Wen,Han, Qiu-Rong,Liang, Xiao-Hong,Xie, Li,Li, Sheng,Wu, Hui-Yong,Song, Bao Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.23
Background: The insulin-like growth factor (IGF) system comprises a group of proteins that play key roles in regulating cell growth, differentiation, and apoptosis in a variety of cellular systems. The aim of this study was to investigate the role of insulin-like growth factor binding protein 3 (IGFBP3) in hepatocellular carcinoma. Materials and Methods: Expression of IGF2, IGFBP3, and PTEN was analyzed by qRT-PCR. Lentivirus vectors were used to overexpress IGFBP3 in hepatocellular carcinoma cell (HCC) lines. The effect of IGFBP3 on proliferation was investigated by MTT and colony formation assays. Results: Expression of IGF2, IGFBP3, and PTEN in several HCC cell lines was lower than in normal cell lines. After 5-aza-2'-deoxycytidine/trichostatin A treatment, significant demethylation of the promoter region of IGFBP3 was observed in HCC cells. Overexpression of IGFBP3 induced apoptosis and reduced colony formation in HUH7 cells. Conclusions: Expression of IGF2, IGFBP3, and PTEN in several HCC cell lines was lower than in normal cell lines. After 5-aza-2'-deoxycytidine/trichostatin A treatment, significant demethylation of the promoter region of IGFBP3 was observed in HCC cells. Overexpression of IGFBP3 induced apoptosis and reduced colony formation in HUH7 cells.
Azohydromonas aeria sp. nov., isolated from air
Han Xue,Chun-gen Piao,Dan-ran Bian,Min-wei Guo,Yong Li 한국미생물학회 2020 The journal of microbiology Vol.58 No.7
A grey pink colored bacterium, strain t3-1-3T, was isolated from the air at the foot of the Xiangshan Mountain in Beijing, China. The cells are aerobic, Gram-stain-negative, non-sporeforming, motile and coccoid-rod shaped (0.9–1.2 × 1.9–2.1 μm). Strain t3-1-3T was catalase-positive and oxidase-negative and this strain grew at 4–42°C (optimum 28°C), a pH of 4.0–9.0 (optimum pH 7.0) and under 0–2% (w/v) NaCl (optimum 0–1% NaCl). A phylogenetic analysis based on 16S rRNA gene sequences revealed that strain t3-1-3T was closely related to Azohydromonas riparia UCM-11T (97.4% similarity), followed by Azohydromonas australica G1-2T (96.8%) and Azohydromonas ureilytica UCM-80T (96.7%). The genome of strain t3-1-3T contains 6,895 predicted protein-encoding genes, 8 rRNA genes, 62 tRNA genes and one sRNA gene, as well as five potential biosynthetic gene clusters, including clusters of genes coding for non-ribosomal peptide synthetase (NRPS), bacteriocin and arylpolyene and two clusters of genes for terpene. The predominant cellular fatty acids (> 10.0% of the total) in strain t3-1-3T were summed feature 3 (C16:1ω7c and/or C16:1ω6c, 37.8%), summed feature 8 (C18:1ω7c and/or C18:1ω6c, 29.7%) and C16:0 (17.3%). Strain t3-1-3T contained ubiquinone-8 (Q-8) as the predominant respiratory quinone. The polar lipids of strain t3-1-3T comprised phosphatidyl ethanolamine (PE), phosphatidyl glycerol (PG), diphosphatidyl glycerol (DPG), an unidentified glycolipid (GL), an unidentified aminophospholipid (APL), two unidentified phospholipid (PL1-2) and five unidentified lipid (L1-5). The DNA G + C content of the type strain is 70.3%. The broader range of growth temperature, assimilation of malic acid and trisodium citrate, presence of C18:3ω6c and an unidentified glycolipid and absence of C12:0 2-OH and C16:0iso differentiate strain t3-1-3T from related species. Based on the taxonomic data presented in this study, we suggest that strain t3-1-3T represents a novel species within the genus Azohydromonas, for which the name Azohydromonas aeria sp. nov. is proposed. The type strain of Azohydromonas aeria is t3-1-3T (= CFCC 13393T = LMG 30135T).