비글개에서 분만 후 자궁수복의 연속적 초음파상

손형원, 김홍석, 김형진, 김일화, 이기창, 이청산, 강현구 충북대학교 동물의학연구소 2006 Journal of Biomedical and Translational Research Vol.7 No.2

본문참고

민감도 분석을 이용한 겹치기 필릿용접의 용접변수 선정에 관한 연구

정재원,김일수,김학형,손성우,전광석 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

Arc welding process is one of the most important technologies to join metal plates. Robotic welding offers the reduced manufacturing cost sought, but its widespread use demands a means of sensing and correcting for inaccuracies in the part, the fixturing, and the robot. A number of problems that need to be addressed in robotic arc welding processes include sensing, joint tracking, and lack of adequate mathematical models for parameter prediction and quality control. Problems with parameter settings and quality control occur frequently in the GMA(Gas Metal Arc) welding process because of the large number of interactive parameters that must be set and accurately controlled. The objectives of this paper are to realize the mapping characteristics of bead width using a sensitivity analysis and multiple regression method, and finally select the most accurate model in order to control the weld quality(bead reinforcement area, bead penetration area) for lap joint fillet welding.

중추신경계 낭미충증에 관한 임상적 고찰

정원영,최일생 朝鮮大學校 附設 醫學硏究所 1991 The Medical Journal of Chosun University Vol.16 No.2

We reviewed clinical features of 133 cases with neurocysticercosis who admitted at Severance Hopital Yongdong Severance Hospital and Chosun University Hospital from March, 1985 to February, 1991 The clinical results were summarized as follows; 1. The ages ranged from 10 to 76 years(mean age 50.0 years)and most of them were 5th or 6th decades 2. Among 133 cases of neurocysticercosis, Parenchymal type was 83 cases (62.4%), mixed type was 25cases(18.8%), ventriculomeningeal type was 23 cases (17.3%) and spinal type was 2 cases (1.5%). 3. The most two frequent initial symptoms were seizure (53.4%) and headache(24.1%). And frequent neurologic symptoms were seizures(64.7%), headache(61.7%), focal neurologic deficit(30.8%), mental changes (13.5%), visual disturbances (12.0%), vertigo(9.8%), cranial nerve pa1sy(6.8%), behavioral symptoms(3.0%), and urinary incontinence (2.3%) in order. 4. There were statistically significant differences in CSF 1eucocytosis(P <0.01), CSF / serum glucose ratio(P < 0.05) between different types. But there were no differences in CSF pressure, protein and glucose level, and ELISA titer. 5. 108cases(81.2%) who received medical treatment only had good prognosis. The overall mortality was 3.7% (5 cases) and causes of death were postoperative infection and shunt malfunction, all occured in ventnculo-meningeal type.

교사들의 공통과학 실험 · 실습 선호도 조사 분석

정원우,이윤종,강용희,윤일희,이우붕,손종경,김중욱,강동진,권용주 慶北大學校 師範大學 科學敎育硏究所 1999 科學敎育硏究誌 Vol.23 No.-

The purpose of this study is to investigate the status of the experimental and practical education in high school general science. The present status and reasonable management of the experimental and practical education in high school general science were evaluated by the questionaires. To do this, 146 science teachers in Korea are administered questionaires. The frequency of the experimental and practical items in the seven kind of general science text books were investigated. The problems and the reasonable management for experimental and practical education were proposed in this paper.

Ramsay-Hunt Syndrome 환자 1례에 대한 증례보고

김일수,송인선,유호상,손원택,오민석,송태원 대전대학교 한방병원 2001 惠和醫學 Vol.10 No.1

Ramsey-Hunt Syndrome occurs when herpes zoster after the facial nerve. It causes vesicular eruption of the pinna, external auditory meaturs and ear drum, severe otalgia with associated facial paralysis and vertigo. We experienced a case of Ramsay Hunt syndrome and managed it with oriental medicine's teatment and therapy of western medicine

Agrobacterium을 이용한 고추의 형질전환체계개발

최근원,박영두,박승국,전영주,유일웅,김인태,백운돈 경희대학교 생명자원과학연구원 1997 硏究論文集 Vol.18 No.-

본 실험은 고추의 형질전환체 선발을 위한 최소의 항생제농도를 결정하고 그 결과를 이용하여 형질전환체를 유기하고 효율을 최대화하기 위하여 수행한 바 그 결과는 다음과 같다. 1. 항생제 감응성 검정결과 kanamycin 40㎎/ℓ와 hygromycin 20 ㎎/ℓ에서 신초형성이 완전히 억제되었다. 2. Agrobacterium 제거에 사용되는 carbenicillin과 cefotaxime 처리시 재분화에 아무런 영향을 미치지 않았으며 cefotaxime 200㎎/ℓ 처리에서는 무처리구보다 신초형성이 더 활발하였다. 3. 회복친인 135Q와 276F에서는 형질 전환시 높은 재분화율을 보였으나 형질전환율은 각각 10%와 11.1%의 낮은 빈도를 보였다. 4. 재분화된 신초들을 대상으로 histochemical GUS assay를 실시한 결과 부분적으로 푸른발색이 확인되었다. 5. GUS활성을 보인 신초들에 대한 NPTⅡprimer를 이용한 PCR검정에서 NPTⅡ 유전자의 존재가 확인되었다. A transformation system using Agrobacterium tumefaciens was developed with different genotypes of hot peppers (Capsicum annuum). Four antibiotics commonly used in Agrobacterium-mediated transformation were tested for their effects on shoot regeneration. Shoot induction was completely inhibited by kanamycin at 40㎎/ℓ and hygromycin at 20㎎/ℓ or higher, but not by carbenicillin and cefotaxime. Cotyledon explants of hot peppers were cocultivated with Agrobacterium turnefaciens LBA4404 which carries a binary. vector pBI121 harboring the neomycin phosphotransferase, type Ⅱ (NPT Ⅱ) gene and β-glucuronidase (GUS) gene. For selection of transformed cells, 40㎎/ℓ kanamycin were used because the sensitivity test showed that 40㎎/ℓ kanamycin completely inhibited shoot induction from nontransformed cells. Histochemical GUS assay showed the presence of the GUS gene and PCR analysis confirmed the NP TⅡ gene was integrated. Transformation frequency was about 10.0% and 11.1% of total regenerants from 135Q and 276F, respectively.

민감도 분석을 이용한 필릿용접용 용접변수 선정에 관한 연구

정재원,김일수,김학형,손성우,김인주,전광석 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

Arc welding process is one of the most important technologies to join metal plates. Robotic welding offers the reduced manufacturing cost sought, but its widespread use demands a means of sensing and correcting for inaccuracies in the part, the fixturing, and the robot. A number of problems that need to be addressed in robotic arc welding processes include sensing, joint tracking, and lack of adequate mathematical models for parameter prediction and quality control, Problems with parameter settings and quality control occur frequently in the GMA(Gas Metal Arc) welding process because of the large number of interactive parameters that must be set and accurately controlled. The objectives of this paper are to realize the mapping characteristics of bead width using a sensitivity analysis and develop the neural network and multiple regression method, and finally select the most accurate model in order to control the weld qua1ity(bead width) for fillet welding. The experimental results show that the proposed neural network estimator can predict bead width with reasonable accuracy, and guarantee the uniform weld quality.

레드 저마네이트 단결정의 초전성 및 자발분극 변화

김일원 울산대학교 1987 연구논문집 Vol.18 No.2

실온에서 부터 Curie 온도까지 레드 저마네이트(Pb??Ge₃O??) 단결정의 초전계수를 이론식으로 부터 구한 값과 실험값을 비교하였다. 실온에서 레드 저마네이트 단결정의 초전계수 값은 2.5×10??C/m²℃이었고, 자발분극은 4.6μC/㎠이었다. 레드 저마네이트 단결정의 온도변화에 따른 초전계수는 Gibbs 자유에너지 이론과 이력곡선으로 부터 계산된 이론값과 실험값이 잘 일치하였다. The pyroelectirc coefficients of Pb??Ge₃O?? single crystals were obtained from room temperature to Curie temperature. At room temperature, the pyroelectirc coefficient and spontaneous polarization of Pb??Ge₃O?? single crystals were 2.5×10?? C/m²℃ and 4.6μC/㎠, respectively. The temperature dependency of the pyroelectric coefficient of Pb??Ge₃O?? single crystal was in good agreement with the results calculated from hysteresis loop and the Gibbs free energy theory.

보의 전단 내력에 관한 실험적 연구

장원영,고봉수,은희창,서일교 제주대학교 공과대학 첨단기술연구소 2001 尖端技術硏究所論文集 Vol.12 No.2

The objective of this study is to describe the shear behavior of reinforced concrete beams. Twenty-four specimens were tested with the variables of concrete strength, the strength and spacing of shear bars, and support conditions. The specimens without the shear reinforcement bars showed the shear failure with the abrupt deterioration of shear capacity. The ones with the shear bars exhibited the enhanced capacity with the yielding of longitudinal bars or crushing of compressive concrete. It was observed that the specimens had an flexural effect. Also, the specimens with the continued support condition showed more flexural and shear capacity than the ones with the simple supports, and it was shown that the results satisfied the ACI code.

용접공들의 면역능에 관한 연구

이수일,조봉수,김영욱,고광욱,조원근,김영실,강수용,황인경,조병만,김돈균 大韓産業醫學會 1997 대한직업환경의학회지 Vol.9 No.1

The authors examined human immunity indicators such as CD4, CD8, Natural Killer(NK) cell, IgG, IgA, and IgM, and heavy metals such as Pb, Cr, Cd to evaluate the health hazard of welders. We selected total 126 male subjects, 60 welders who had more than 5 year working history as an exposure group, and 66 office workers and medical college students as a control group. This immunity evaluation approach is the first newly designed study that has never been tried in past studies on welder's heath evaluation. And the results were as follows. 1. Total lymphocyte count of peripheral blood was significantly higher in welder group, 2,615±650 ea/㎕ compared with 2,368±681 ea/㎕ in control group(p>0.05). 2. The proportion of CD4, CD8, NK cell in welder group was 37.5±9.4%, 24.0±8.8%, and 21.0±9.5%, respectively, and 35.5±6.5%, 25.0±6.9%, and 19.6±8.8% in control group. CD4 and NK cell were slightly higher, and CD8 was slightly lower in welder group. but there was no statistical significance between two groups(p≥0.05). 3. IgG, IgA, and IgM in welder group were 15.9㎎/㎗, 2.7㎎/㎗ and 1.5㎎/㎗, respectively, and 15.6㎎/㎗, 2.9㎎/㎗ and 1.7㎎/㎗ in control group. There was no statistical significance between two groups(p≥0.05). 4. Blood lead, cadmium and chromium concentrations were 4.2±1.8㎍/㎗, 0.4±0.38㎍/㎗, 1.2±0.6㎍/㎗ in welder group and 3.2±1.7㎍/㎗, 0.44±0.29㎍/㎗, 1.1±0.6㎍/㎗ in control group, respectively, and these value were within normal ranges.