한국인 환자에서 Vancomycin의 집단약동학 (Population Pharmacokinetics)에 관한 연구

유경상,배균섭,이주연,조주연,장인진,신상구,신완균 大韓臨床藥理學會 1998 臨床藥理學會誌 Vol.6 No.2

신경외과 영역에서의 감염에 대한 Cefpiran의 효과

성경훈,김상진,도종웅 최신의학사 1989 最新醫學 Vol.32 No.4

콘텍트렌즈 착용전후 측정기기별 굴절력에 관한 연구

성아영,이종헌,박상철,김상균,송경석 대불대학교 2002 論文集 Vol.8 No.1

Heine's Retinoscope is 100% dust proof and incorporates a unique Integrated Polarizing filter which eliminates all internal glare, providing for a clearer, brighter papillary reflex, enhancing performance and ease of examination, As a result of their data basis, we observed and analyzed which instrument has lesser occurring refracting aberration. Contact lens Wearers assuming best visual acuity lead 1.0(20/20) performed over refraction using Retinoscope. Auto Refractor, Auto Refrac-Keratometer and Suresight. The Auto refractor provides highly accurate measurement of patients refraction error. Auto Refrac-Keratometer provides precise and efficient refraction and Keratometry measurements and suggests contact lens base curve values. The automatic calculation of residual astigmatism assists in fitting RGP lenses. Also, suresight is a most convenient instrument for refraction. 30 contact lens wearers are chosen regardless of age, sex, and job. At least 30 minute after placing contact lens in each subjects eye, Performing over refraction by use of Retinoscope, Auto refractor, Auto refrac-Keratometer and suresight. Then presenting each results by graph in consist of spherical part, cylinder, axis, left eye and right eye separately.

폐석재와 석분을 사용한 식생블럭 제품 개발

성찬용,류능환,연규석,윤준노,김영익,남기성,노경희,박일순 강원대학교 부설 석재복합신소재 제품연구센터 2002 석재연 논문집 Vol.7 No.-

본 연구는 폐석재와 석분을 사용하여 친환경적인 식생블럭 제품을 개발하기 위하여 폐석재의 입경과 석분의 첨가량을 각각 3종류씩 총 9종류의 식생블럭에 대하여 단위중량, 공극율, 투수량, 압축강도, 쪼갬인장강도, 휨강도, 내산성, 알카리농도에 대하여 구명하였다. 단위중량, 강도, 내산성은 골재의 입경이 작을수록 석분의 혼입량이 많을수록 크게 나타났으며, 공극율과 투수량은 작게 나타났다. 강도는 중성화 처리 유무에 따라 4∼5% 정도의 미소한 차이가 나타났다. 알카리 농도는 중성화 약품처리, 수중용출, 야외폭로 순으로 효과가 크게 나타났으며, 이는 식생블럭의 중성화 방법 선택에 매우 중요한 내용이라 할 수 있다. 또한, 식생상태는 공극율과 골재의 입경이 큰 식생블럭이 생육에 유리한 것으로 나타났다. This study was performed to develop the environment-friendly plantable block and to evaluate unit weight, void ratio, permeability, strength, acid-resistance and value of pH by the change of the grading of waste stone and the addition amount of stone dust. The unit weight, strength, acid-resistance is increased with small size of waste stone with increase of the addition amount of stone dust. But, the void ratio and permeability is decreased. The strength of neutral plantable block is decreased approximately 4-5% than that of the normal plantable block. The decreased effect of pH increased in order to neutral treatment, underwater leaching and field exposure. It is very important contents in neutral method selection of plantable block. Also, the planting state is grown rapidly with increase of the void ratio and of the waste stone size, approximately.

치아 마모 환자에서 수직고경 증가를 동반하여 단일구조 지르코니아 보철물로 완전구강회복을 시행한 증례

오경철,정문규,김지환,심준성 大韓齒科補綴學會 2012 대한치과보철학회지 Vol.50 No.3

과도한 치아 마모는 교합면에 손상을 야기하고, 치수 병변, 교합 부조화, 기능장애, 심미적 문제 등을 야기할 수 있다. 과도한 치아 마모를 갖고 있는 환자들을 치료하고자 할 때 수직교합고경(vertical dimension of occlusion, VDO)의 상실 여부와 수복을 위한 악간 공간의 적절성 여부에 기반하여 분류를 할 필요가 있다. 본 증례의 환자는 다수 치아들의 마모를 지닌 50세의 남성으로, 과도한 치아 마모가 있지만 수직교합고경의 상실은 없으며 수복을 위한 악간 공간이 부족하였다. 이러한 경우 수직교합고경을 증가시켜 치료를 진행하는 것을 고려할 수 있다. 수직교합고경의 증가를 필요한 범위 내에서 최소로 줄이고, 증가된 수직교합고경 상에서 안정화 기간을 거친 뒤 안정된 교합 접촉을 제공할 수 있다면, 수직고경 증가를 동반한 치료법은 안정성을 가질 수 있다. 본 남성 환자를 치료하기 위해 수직고경의 증가를 동반하여 전치부와 구치부에서 단일 구조 지르코니아를 이용한 고정성 보철물로 수복을 하였다. 일련의 치료과정을 통하여 기능적인 면과 심미적인 면에서 만족스러운 결과를 얻었기에 보고하는 바이다. Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.

장간막정맥혈전증 1예

서경원,이상호 고신대학교 의과대학 2009 고신대학교 의과대학 학술지 Vol.24 No.2

Mesenteric venous thrombosis is a rare disease accounting for 5-15%. MVT is generally difficult to diagnose and can be fatal because of delayed diagnosis and treatment. A case of extensive thrombosis of the mesenteric vein was diagnosed early and successfully treated in a 70-year-old female who was admitted to hospital because of bloody diarrhea and abdominal pain. Computed tomography(CT) showed remarkable thickening of the bowel walls and extensive thrombosis of superior mesenteric vein. Because intestinal infarction and peritonitis was seen, emergency operation was done and catheter-directed thrombectomy through mesenteric vein was successfully performed. She discharged without any complications.

동통성 안근마비를 나타낸 양측성 자발성 경동맥해면정맥동루 2례

전성만,박경원,차재관,김상호,김재우,최순섭 대한신경과학회 1997 대한신경과학회지 Vol.15 No.5

광탄성 실험법에 의한 크랙을 가진 유한판의 정지구멍(Stop-Hole)의 최적크기에 관한 연구

권오성,황재석,서경덕 영남대학교 공업기술연구소 1999 工業技術硏究所論文集 Vol.27 No.1

Minimization of the stress concentration is very important in the life cycle extension of structures and machine parts, which have cracks or notches. Industrial field, stop-hole is drilled on the structures and machine parts to prevent the origination and propagation of cracks and to reduce the stress concentration. But, there is no a study on the optimal dimension of stop-hole for the various loading and geometrical conditions. Therefore, in this study, a study on the optimal dimension of stop-hole with various conditions is done by photoelastic experimental method.

창녕 교동 제89호분 출토 금동제 안교장식 : 보존처리와 제작기법 조사

김경희,한만성,안병찬 국립중앙박물관 1999 박물관보존과학 Vol.1 No.-

국립김해박물관 개관전시를 위해 일제시대 창녕 교동 제89호분에서 출토된 금동제안교장식(金銅製鞍橋裝飾 이하 “안교장식”)을 보존처리하였다. 안교장식은 수많은 편으로 파손된 채 다른 유물과 뒤섞여 보관되어 왔다. 보존처리는 유물의 원형을 되찾고 재질을 안정화시키는 점에 두고 과학적인 조사와 처리를 실행하는 한편 유물의 제작기법도 상세히 조사할 수 있었다. 그 결과 안교장식의 두꺼운 부식생성물을 벗기고 파편을 접착하여 원래 모습으로 복원하게 되었고 전시와 관리도 가능하게 조치하였다. 또한 다양한 고대 제작기법이 적용된 안교장식임을 확인할 수 있었다. Conservation treatments were done for the gilt bronze saddle accessory excavated from Tomb No. 89 in Kyo-dong, Changnyong in Japanese rule period. The saddle accessory, broken into numerous pieces, was mixed with other remains. Principal aims of conservation treatments were to recover original shape of object and stabilize its material. In the process of treatments manufacturing technique of the remain was examined minutely. Thick layers of corrosion substances were peeled off and numerous pieces were pasted together to restore the original shape. And then the saddle accessory was mounted on an acrylic board to be handled and exhibited safely. In this process, it was confirmed that various ancient techniques of metalic crafts such as amalgam gilding, riveting, piercing, line engraving, stamping, chasing etc. had been used to make the saddle accessory.

물세척법에 의한 결장루관리 실태에 관한 조사

최상경,박희자,김채숙,서문숙 대한대장항문학회 1992 Annals of Coloproctolgy Vol.8 No.2