http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
EXPLOSIVE CONSOLIBATED SICp/Al-Li COMPOSITE AND ITS MICROSTRUCTURE
Shao, Shao, Wen-Zhu,An, An, Xi-Yong 한국재료학회 1995 Fabrication and Characterization of Advanced Mater Vol.2 No.4
Blanks of SiCp/Al-Li composite were produced by way of powder explossion consolidation method which has been optimized in parameter thriugh expoeriment. By SEM, it was found that the microstructure of this composite has following characteristics : (1) SiC particles are uniformlu distributed in the composite ; (2) Al-Li powders still remain original dendrite structure ; (3) There is some metalluryical bonding between composite particles ; (4) hine particles deform or milt preferentiallu and along some direction deformation of Al-Li particles ; (5) SiCp/Al-Li composite is composed of two kind of Al-Li pweders with very different size ; (6) press-torsion, pressless sinter and hot is static press treatment will make original dendrite in Al-Li particles disappear, further enlargi metallurgical bonding region and incress the dinsity of composite.
Research on Automatic Mapping Method of Geologic Column
Shao YanLin,Shao YaXiong,Xu XiaoHong,He ZhenMing,Li GongQuan 보안공학연구지원센터 2015 International Journal of Hybrid Information Techno Vol.8 No.7
The realization of the digital reservoir can greatly improve the information level of the petroleum corporation in hydrocarbon exploration and development, reduce risk and improve efficiency. Wells are the core object of digital reservoir management. Geologic column of drilling is the main carrier of multi-source information. Automatic mapping method and multi-source information fusion of geologic column have become a research hotspot of digital reservoir construction. This paper describes current situation of the domestic reservoir management and practical problem of geological maps digitizing. The thought and process of geologic column automatic mapping, which are based on spatial information technology, are submitted. The partition of information bar is settled on. The three-tier system architecture of automatic mapping system is established. With the support of XML technology, XSD is used to make the parameter template of geologic column automatic mapping and realize corresponding configuration wizard. UML is used to design the automatic mapping system. The lithological plate and geological symbols is coded to realize automatic mapping of corresponding drawing elements. The drawing methods of logging and petrophysical data are improved and the visualization of curve and numerical stick figure is achieved. The integration method of casting photos, core images and geologic column is submitted. For the secondary development technology of ArcGIS Engine, object-oriented program is adopted to realize automatic mapping of geologic ArcGIS Engine column. This paper provides a new way for the geologic column mapping during the process of digital reservoir construction.
Shao Bo Li,Zhi Hong Zhang,Shao Qing Li,Yang Sheng Li,You Lin Zhu,Ying Guo Zhu 한국유전학회 2008 Genes & Genomics Vol.30 No.4
Grain yield is a result of dry matter accumulation and partitioning in rice (Oryza sativa L.). To characterize the genetic basis of dynamics of traits representing dry matter accumulation and partitioning as well as their relationships with each other, composite interval mapping of quantitative trait loci (QTL) was conducted based on time-related phenotypic data obtained from a population of 258 recombinant inbred lines (F12), which was derived from a cross between Lemont (japonica var.) and Teqing (indica var.). A total of twenty-three QTL were identified for leaf weight, stem weight and panicle weight at four measuring stages after heading. However, these three dynamic traits were observed to be controlled by different QTL (genes) at different growth stages. An extreme example was that at least three types of QTL (genes) might be involved in the development of panicle weight. Growth duration, which is closely related to dry matter accumulation and partitioning, was also identified to be significantly affected by four QTL. The close correlations among the studied four traits were explained to some extent by six co-located QTL. Nevertheless, it would be of great importance to distinguish the pleiotropic or linked effects of the co-located QTL. In addition, the chromosome regions or QTL identified in this study were compared with those previously reported for the same or related traits with the same RIL population.
( Wang Shao Wen ),( Miao Xing ),( Gang Liu ),( Shao Wen Yu ),( Juan Wang ),( Sheng Li Tian ) 한국미생물 · 생명공학회 2012 Journal of microbiology and biotechnology Vol.22 No.8
Ribonucleic acid interference (RNAi) inhibits the expression of target genes in a sequence-specific manner, and shows potential for gene knockdown in filamentous fungi, in which the locus-specific gene knockout occurs in low frequency. In this study, the function of the repressor of cellulase expression I (ACEI) was verified in Trichoderma koningii (T. koningii) YC01 through RNAi, and ace1-silenced strains with improved cellulase productivity were obtained. An expression cassette that transcribed the interfering double-stranded RNA (dsRNA) of ace1 was constructed and transformed into T. koningii, and the transformants, in which the expression of ace1 was successfully silenced, were selected. As a result of the ace1 gene silencing, the expression levels of the main cellulase and xylanase genes were elevated, and the enhanced production of total proteins, cellulase, and xylanase was observed in the cultivation. In addition, the downregulation of ace1 resulted in an increasing expression of xyr1, but no clear variation in the expression of cre1, which suggested that ACEI acted as a repressor of the xyr1 transcription, but was not involved in the regulation of the cre1 expression. The results of this work indicate that ace1 is a valid target gene for enhancing enzyme production in T. koningii, and RNAi is an appropriate tool for improving the properties of industrial fungi.
Wang, Shao-Ming,Zhang, Shao-Kai,Pan, Xiong-Fei,Ren, Ze-Fang,Yang, Chun-Xia,Wang, Zeng-Zhen,Gao, Xiao-Hong,Li, Man,Zheng, Quan-Qing,Ma, Wei,Zhao, Fang-Hui,Qiao, You-Lin,Sivasubramaniam, Priya Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.7
Background: College students are recommended as the target groups for catch-up human papillomavirus (HPV) vaccination. Systematical exploration of awareness, acceptability, and decision-making factors of HPV vaccination among Chinese college students has been limited. Materials and Methods: A multi-center survey was conducted in mainland China between November 2011 and May 2012. College students aged 18-22 years were stratified by their grade, gender, and major for sampling. Socio-demographic and HPV-related information such as knowledge, perceptions, acceptability, and attitudes were collected through a questionnaire. Results: A total of 3,497 undergraduates completed the questionnaire, among which 1,686 were males. The acceptability of the HPV vaccine was high (70.8%). Undergraduates from high-level universities, at lower grade, or with greater prior knowledge of HPV vaccines showed higher acceptability of HPV vaccination ($p_{trend}$ <0.001). Additionally, undergraduates with vaccination experience outside the National Expanded Program on Immunization (OR=1.29; 95%CI: 1.10-1.51) or fear of HPV-related diseases (OR=2.79; 95%CI: 2.28-3.41) were more willing to accept HPV vaccination. General knowledge of HPV vaccine was low among undergraduates, and safety was a major concern (71.05%). The majority of students wished to pay less than 300RMB for HPV vaccine and chose the Chinese Center for Disease Control and Prevention as the most appropriate venue for vaccination. Conclusions: Although most undergraduates demonstrate positive attitudes towards HPV vaccination, challenges pertaining to introduction exist in China. Corresponding proactive education and governmental subsidy to do so are urgently needed by this age-group population. Suggestions and potential strategies indicated may help shape the future HPV vaccination program in China.
재유화형 폴리머와 백시멘트의 조성비가 자기수평모르타르의 물리적 특성에 미치는 영향에 관한 실험적 연구
( Shao Xu-dong ),곽규성 ( Kwak Kyu-sung ),채우병 ( Chae Woo-byung ),오상근 ( Oh Sang-keun ) 한국구조물진단유지관리공학회 2009 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.13 No.2
This study investigates the physical properties of the self-leveling mortar according to variable composition set of redispersible polymers and white Portland cement. This materials have to be composed of many types of binders and chemical additives. So it is difficult to decide suitable mixing proportion of composition materials. The self-leveling materials using "0, 2, 4, 6, 8kg" of EVA polymer dispersion ranges are prepared with three types of white Portland cement rations which respectively rangs from "290, 300, 310kg", and were tested for basic characteristics such as flowability, flexural, and compressive strength, bond strength.
Shao Nian Li,Hui Wang,Pan Yang,Yi Li,JunHu Yang 한국유체기계학회 2021 International journal of fluid machinery and syste Vol.14 No.1
This paper sets up both a force balance equation and a three-dimensional geometric model of a flexible side plate in an intra-vane type pump, after analyzing the structure and mechanical properties of the plate. The formulas for calculating deformation were obtained, and the theoretical curve of change in deformation was determined. Then, the contour of deformation was obtained using software simulation. The calculated and simulated values of deformation of the flexible side plate, in three positions under four working pressures, were found to be close to one another, the relative error between them being less than 2%. Next, the formula for the calculation of oil film thickness was obtained, and the curve of the change in oil film thickness relative to the distance along the radial direction of the side plate was determined, considering the flexible side plate deformation. The oil film thickness for three flexible side plate positions were then tested through experiment. The calculated values of oil film thickness were also close to the tested values. Although there was a small difference, the relative error between them was less than 5% for the oil film thickness measured at its lowest point, which indicates the accuracy of the results obtained by the theoretical calculation.