http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Ruofei Jin (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
Yue Yang,Sen Qiao,Ruofei Jin,Jiti Zhou,Xie Quan 한국화학공학회 2018 Korean Journal of Chemical Engineering Vol.35 No.4
Membrane fouling is a universal problem for conventional membrane filtration that usually causes a deterioration in membrane performance. We used electro-assisted carbon nanotubes hollow fiber membranes (CNTs-HFMs) to investigate the anti-fouling properties using natural organic pollutants. Benefiting from the electro-assistance, the permeation flux of humic acid solution using CNTs-HFMs was 190.20 L/(m2·h·bar), which was about 1.5- and 4.4- times higher than those of CNTs-HFMs without electro-assistance and traditional polyvinylidene fluoride hollow-fiber membranes (PVDF-HFMs). And the permeation fluxes of bovine serum albumin, sodium alginate and supernatant of anaerobic bioreactor also presented similar results. The average COD removal rate of CNTs-HFMs (66.8%) at 1.0 V was higher than that of CNTs-HFMs without electro-assistance and PVDF-HFMs, which can be attributed to the formation of electrostatic repulsive force. It could reduce the deposition of pollutants on membrane surface under electroassistance.
-
Preparation and antifouling performance of PVDF-DCOIT composite hollow fiber membranes
Sen Qiao,Hongjie Cao,Yue Yang,Ruofei Jin,Jiti Zhou 한국화학공학회 2020 Korean Journal of Chemical Engineering Vol.37 No.3
Membrane fouling is the main bottleneck that hinders the applications of membrane bioreactors (MBRs). 4,5-Dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT), as an environmentally-acceptable antifouling biocide, was mixed with Polyvinylidene fluoride (PVDF) to fabricate hollow fiber membrane via non-solvent induced phase separation (NIPS), which was able to effectively improve the antifouling performance of the membranes in this work. Overall research of the prepared membrane revealed that membranes with 3 wt% DCOIT exhibited the optimum antifouling performance. With the addition of DCOIT, hydrophilicity and pure water flux of 3 wt% DCOIT membranes maintained remarkable improvement by 22.9% and 64.6% than that of membranes without DCOIT. Meanwhile, the surface morphologies of 3wt% DCOIT membranes were smoother than the control group in terms of SEM and AFM images, which was beneficial to alleviate membrane fouling. In antifouling experiments, the flux variation rate of membranes with 3 wt% DCOIT filtrated in bull serum albumin, sodium alginate and humic acid solution were 81.42%, 54.25%, 50.5%, while membrane without DCOIT were 64.6%, 24.72% and 29%, respectively. Similar results were obtained by filtrating anaerobic sludge for 24 h. The flux variations of 3 wt% DCOIT membranes were 59.4%, 47.8% and 46.0%, respectively in three stages. However, the flux variations of membranes without DCOIT were 44.8%, 36.7% and 19.8%, respectively, which showed better antifouling ability and higher flux recovery efficiency. The novel membranes would provide some theoretical basis and technical support for the rational combinations in elevating the overall antifouling properties of membranes.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
