Re-Narrating the Who of the Student, a Response to Clegg

( Samuel D. Rocha ) 경북대학교 중등교육연구소 2018 Asia Pacific Journal of Educational Research Vol.1 No.2

In this article, Samuel D. Rocha responds to Daniel Clegg reply to his previous article, reasserting the limited scope and pedagogical intent of his claims about the worldview of the teacher and its fundamental entanglement within metaphysical disputes. A feature example is Rocha’s discussion of feedback loops. Rocha also affirms Clegg’s original suggestions and contributions to his ideas.

Ultrasonography for long-term evaluation of hyaluronic acid filler in the face: A technical report of 180 days of follow-up

Rocha, Luiz Paulo Carvalho,Rocha, Tania de Carvalho,Rocha, Stephanie de Cassia Carvalho,Henrique, Patricia Valeria,Manzi, Flavio Ricardo,Silva, Micena Roberta Miranda Alves e Korean Academy of Oral and Maxillofacial Radiology 2020 Imaging Science in Dentistry Vol.50 No.2

Purpose: In this study, we used ultrasonography to monitor the use of hyaluronic acid (HA) as a filler in the face for esthetic reasons. We monitored changes in the filler shape, distribution, and relationship with adjacent anatomical structures over a 180-day period. Materials and Methods: Two patients each received an ultrasound-guided injection of HA, with different products and application sites for each patient. In 1 patient, the injection was administered in the angle of the mandible, while in the other, it was administered in the zygomatic region. The injection sites were monitored via ultrasonography at 24 hours, 30 days, and 180 days, at which times the imaging characteristics of the filler were observed. All injections were performed by the same professional, as were the ultrasound exams, which were conducted using the same equipment. Results: In both cases, the HA fillers were visualized using ultrasound at all time points. Some differences were observed between the cases in the images and the distribution of the pockets of filler. In 1 case, the filler appeared as a dark hypoechoic region with well-defined contours, and the material was observed to have moved posteriorly by the 180-day mark. In the other case, the material appeared hyperechoic relative to the previous case and presented no noticeable changes in its anteroposterior distribution over time. Conclusion: Based on these 2 cases, ultrasonography can be a complementary tool used to monitor facial fillers over the long term, allowing for the dynamic observation of different fillers.

Ultrasonography for long-term evaluation of hyaluronic acid filler in the face: A technical report of 180 days of follow-up

Luiz Paulo Carvalho Rocha,Tânia de Carvalho Rocha,Stephanie de Cássia Carvalho Rocha,Patrícia Valéria Henrique,Flávio Ricardo Manzi,Micena Roberta Miranda Alves e Silva 대한영상치의학회 2020 Imaging Science in Dentistry Vol.50 No.2

Purpose: In this study, we used ultrasonography to monitor the use of hyaluronic acid (HA) as a filler in the face for esthetic reasons. We monitored changes in the filler shape, distribution, and relationship with adjacent anatomical structures over a 180-day period. Materials and Methods: Two patients each received an ultrasound-guided injection of HA, with different products and application sites for each patient. In 1 patient, the injection was administered in the angle of the mandible, while in the other, it was administered in the zygomatic region. The injection sites were monitored via ultrasonography at 24 hours, 30 days, and 180 days, at which times the imaging characteristics of the filler were observed. All injections were performed by the same professional, as were the ultrasound exams, which were conducted using the same equipment. Results: In both cases, the HA fillers were visualized using ultrasound at all time points. Some differences were observed between the cases in the images and the distribution of the pockets of filler. In 1 case, the filler appeared as a dark hypoechoic region with well-defined contours, and the material was observed to have moved posteriorly by the 180-day mark. In the other case, the material appeared hyperechoic relative to the previous case and presented no noticeable changes in its anteroposterior distribution over time. Conclusion: Based on these 2 cases, ultrasonography can be a complementary tool used to monitor facial fillers over the long term, allowing for the dynamic observation of different fillers.

Effect of the restorative technique on load-bearing capacity, cusp deflection, and stress distribution of endodontically-treated premolars with MOD restoration

da Rocha, Daniel Maranha,Tribst, Joao Paulo Mendes,Ausiello, Pietro,Dal Piva, Amanda Maria de Oliveira,Rocha, Milena Cerqueira da,Di Nicolo, Rebeca,Borges, Alexandre Luiz Souto The Korean Academy of Conservative Dentistry 2019 Restorative Dentistry & Endodontics Vol.44 No.3

Objectives: To evaluate the influence of the restorative technique on the mechanical response of endodontically-treated upper premolars with mesio-occluso-distal (MOD) cavity. Materials and Methods: Forty-eight premolars received MOD preparation (4 groups, n = 12) with different restorative techniques: glass ionomer cement + composite resin (the GIC group), a metallic post + composite resin (the MP group), a fiberglass post + composite resin (the FGP group), or no endodontic treatment + restoration with composite resin (the CR group). Cusp strain and load-bearing capacity were evaluated. One-way analysis of variance and the Tukey test were used with ${\alpha}=5%$. Finite element analysis (FEA) was used to calculate displacement and tensile stress for the teeth and restorations. Results: MP showed the highest cusp (p = 0.027) deflection ($24.28{\pm}5.09{\mu}m/{\mu}m$), followed by FGP ($20.61{\pm}5.05{\mu}m/{\mu}m$), CR ($17.62{\pm}7.00{\mu}m/{\mu}m$), and GIC ($17.62{\pm}7.00{\mu}m/{\mu}m$). For load-bearing, CR ($38.89{\pm}3.24N$) showed the highest, followed by GIC ($37.51{\pm}6.69N$), FGP ($29.80{\pm}10.03N$), and MP ($18.41{\pm}4.15N$) (p = 0.001) value. FEA showed similar behavior in the restorations in all groups, while MP showed the highest stress concentration in the tooth and post. Conclusions: There is no mechanical advantage in using intraradicular posts for endodontically-treated premolars requiring MOD restoration. Filling the pulp chamber with GIC and restoring the tooth with only CR showed the most promising results for cusp deflection, failure load, and stress distribution.

Effect of the restorative technique on load-bearing capacity, cusp deflection, and stress distribution of endodontically-treated premolars with MOD restoration

Daniel Maranha da Rocha,João Paulo Mendes Tribst,Pietro Ausiello,Amanda Maria de Oliveira Dal Piva,Milena Cerqueira da Rocha,Rebeca Di Nicoló,Alexandre Luiz Souto Borges 대한치과보존학회 2019 Restorative Dentistry & Endodontics Vol.44 No.3

Objectives: To evaluate the influence of the restorative technique on the mechanical response of endodontically-treated upper premolars with mesio-occluso-distal (MOD) cavity. Materials and Methods: Forty-eight premolars received MOD preparation (4 groups, n = 12) with different restorative techniques: glass ionomer cement + composite resin (the GIC group), a metallic post + composite resin (the MP group), a fiberglass post + composite resin (the FGP group), or no endodontic treatment + restoration with composite resin (the CR group). Cusp strain and load-bearing capacity were evaluated. One-way analysis of variance and the Tukey test were used with α = 5%. Finite element analysis (FEA) was used to calculate displacement and tensile stress for the teeth and restorations. Results: MP showed the highest cusp (p = 0.027) deflection (24.28 ± 5.09 µm/µm), followed by FGP (20.61 ± 5.05 µm/µm), CR (17.72 ± 6.32 µm/µm), and GIC (17.62 ± 7.00 µm/µm). For load-bearing, CR (38.89 ± 3.24 N) showed the highest, followed by GIC (37.51 ± 6.69 N), FGP (29.80 ± 10.03 N), and MP (18.41 ± 4.15 N) (p = 0.001) value. FEA showed similar behavior in the restorations in all groups, while MP showed the highest stress concentration in the tooth and post. Conclusions: There is no mechanical advantage in using intraradicular posts for endodontically-treated premolars requiring MOD restoration. Filling the pulp chamber with GIC and restoring the tooth with only CR showed the most promising results for cusp deflection, failure load, and stress distribution.

Efficient Spectrofluorimetric Analysis of Single-Walled Carbon Nanotube Samples

Rocha, John-David R.,Bachilo, Sergei M.,Ghosh, Saunab,Arepalli, Sivaram,Weisman, R. Bruce American Chemical Society 2011 ANALYTICAL CHEMISTRY - Vol.83 No.19

<P>A new method and instrumentation are described for rapid compositional analysis of single-walled carbon nanotube (SWCNT) samples. The customized optical system uses multiple fixed-wavelength lasers to excite NIR fluorescence from SWCNTs individualized in aqueous suspensions. The emission spectra are efficiently captured by a NIR spectrometer with InGaAs multichannel detector and then analyzed by a computer program that consults a database of SWCNT spectral parameters. The identities and relative abundances of semiconducting SWCNTs species are quickly deduced and displayed in graphs and tables. Results are found to be consistent with those based on manual interpretation of full excitation–emission scans from a conventional spectrofluorometer. The new instrument also measures absorption spectra using a broadband lamp and multichannel spectrometers, allowing samples to be automatically characterized by their emission efficiencies. The system provides rapid data acquisition and is sensitive enough to detect the fluorescence of a few picograms of SWCNTs in ∼50 μL sample volumes.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/ancham/2011/ancham.2011.83.issue-19/ac2014788/production/images/medium/ac-2011-014788_0005.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/ac2014788'>ACS Electronic Supporting Info</A></P>

THE PORTS OF THE STATE OF SANTA CATARINA (BRAZIL)

ROCHA I O,VIDAL L M,GUTERRES C D 인하대학교 정석물류통상연구원 2012 JOURNAL OF INTERNATIONAL LOGISTICS AND TRADE Vol.10 No.3

Due to the Brazilian large territory, the network of ports was structured in order to to meet the demands at national and global scales. In southern Brazil, more specifically in the State of Santa Catarina, the ports are an inseparable component of the set of characteristics which allowed the state to become, over the 20th century, one of the most industrialized regions in Brazil. The increase in industrial exports of Santa Catarina, mainly after the 1980s, resulted in a more diversified exporting agenda, which benefited from the existing transport infrastructure: roads, airports, rail ways, and ports. This research aimed at identifying and analyzing the main problems regarding ports infrastructure of the state, which affects the large exporting industries. The research methods used were: a) bibliographic and documents review; b) questionnaire survey and semi-structured interviews with a diversified sample including 40 of the largest exporting companies in Santa Catarina; and c) processing and analysis of the data and information collected. The use of questionnaire survey and semi-structured interviews aimed at: eliciting and characterizing the main problems facing the ports infrastructure in the state and identifying the competitive advantages and disadvantages compared to worldwide market competitors.

Comparison of light-transmittance in dental tissues and dental composite restorations using incremental layering build-up with varying enamel resin layer thickness

Rocha Maia, Rodrigo,Oliveira, Dayane,D'Antonio, Tracy,Qian, Fang,Skif, Frederick The Korean Academy of Conservative Dentistry 2018 Restorative Dentistry & Endodontics Vol.43 No.2

Objectives: To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. Materials and Methods: B1-colored natural teeth slabs were compared to dental restoration build-ups with A2D and B1E-colored nanofilled, supra-nanofilled, microfilled, and microhybrid composites. The enamel layer varied from 0.3, 0.5, or 1.2 mm thick, and the dentin layer was varied to provide a standardized 3.7 mm overall sample thickness (n = 10). All increments were light-cured to $16J/cm^2$ with a multi-wave LED (Valo, Ultradent). Using a spectrophotometer, the samples were irradiated by an RGB laser beam. A voltmeter recorded the light output signal to calculate the light-transmittance through the specimens. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey's test (p = 0.05). Results: Mean light-transmittance observed at thicker final layers of enamel were significantly lower than those observed at thinner final layers. Within 1.2 mm final enamel resin layer (FERL) thickness, all composites were similar to the dental tissues, with exception of the nanofilled composite. However, within 0.5 mm FERL thickness, only the suprananofilled composite showed no difference from the dental tissues. Within 0.3 mm FERL thickness, none of the composites were similar to the dental tissues. Conclusions: The supra-nanofilled composite had the most similar light-transmittance pattern when compared to the natural teeth. However, for other composites, thicker FERL have a greater chance to match the light-transmittance of natural dental tissues.

Information dynamics shape the sexual networks of Internet-mediated prostitution

Rocha, L.E.C.,Liljeros, F.,Holme, P. National Academy of Sciences 2010 PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF Vol.107 No.13

Use of Bisphosphonates, Calcium and Vitamin D for Bone Demineralization in Patients with Human Immunodeficiency Virus/Acquired Immune Deficiency Syndrome: A Systematic Review and Meta-Analysis of Clinical Trials

Rocha Vinícius Magno da,Mariana Balardino Bogado Faria,Francisco de Assis dos Reis Júnior,Carla Ormundo Gonçalves Ximenes Lima,Rossano Kepler Alvim Fiorelli,Keila Mara Cassiano 대한골대사학회 2020 대한골대사학회지 Vol.27 No.3

Background: The present study performed a systematic review and meta-analysis of clinical trials using bisphosphonates for bone demineralization in human immunodeficiency virus (HIV) patients. Methods: A comprehensive literature search was performed from January 2004 to January 2020 considering the bone mineral density (BMD) of the lumbar spine (LS) as the main outcome. Out of 214 titles that met criteria, 9 studies fulfilled the selection criteria. Results: A total of 394 patients were identified, and they were allocated into 2 groups: the intervention group (200 patients), to whom a combination of alendronate or zoledronate with calcium and vitamin D was administered; and control group (194 patients), to whom only calcium and vitamin D was administered. Clinical profile and indicators of bone metabolism of the participants were evaluated regarding effect size, homogeneity, and consistency. No substantial heterogeneity between the groups was found for the baseline variables, and there was high consistency to the main outcome. The meta-analysis shows a significant difference in post-treatment BMD, favoring the intervention over the control treatment. The intervention improved LS density up to 0.227 g/cm², raising the average to the levels of general population. Adverse effects related to intervention were fever immediately after zoledronate administration and gastrointestinal complaints during alendronate usage. Other adverse effects were barely reported and poorly connected to intervention by studies’ authors, despite all of them have been successfully resolved. Conclusions: This study provides evidence that BMD post-treatment is better in HIV patients who used bisphosphonates combined with calcium and vitamin D.