http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Research on Friction Characteristics of AlCrN and TiAlSiN Coatings and Properties of Coated Tools
Qi-Bin Yue,Hui-Bo He,Hua-Ying Li,Jun Zhang,Yuan-ming Li,Lu Ma 한국정밀공학회 2019 International Journal of Precision Engineering and Vol.20 No.9
AlCrN and TiAlSiN coatings were deposited on the surface of 30CrMnSi steel and cemented carbide YT15 by multi-arc ion plating technique. A scanning electron microscopy was used to observe the surface morphologies of both coatings. The reciprocating sliding tests of AlCrN and TiAlSiN coating were performed to investigate the friction coefficients and the wear mechanisms of both coatings were analyzed as well. Dry machining tests on 30CrMnSi hardened steel were carried out with the AlCrN and TiAlSiN coated tools on a CA6140A lathe. The effects of cutting speed on cutting forces and cutting temperatures of AlCrN and TiAlSiN coated tools were obtained and analyzed. The microcosmic micrographs of wear areas of both coated tools were observed and investigated by scanning electron microscope and energy dispersive spectrum. The results show that the hardness and bonding strength of AlCrN coating are higher than that of TiAlSiN coating, while the friction coefficient of AlCrN coating is lower than that of TiAlSiN coating. Both the cutting force and cutting temperature of AlCrN coated tool are lower than TiAlSiN coated tool. The time required for the bluntness of the AlCrN coated tool is approximately 33.3% longer than that of the TiAlSiN coated tool, and the main wear mechanisms of both tools are mainly crater wear, diffusion wear and oxidation wear.
Huang, Yue-Han,Chen, Zhen-Kun,Huang, Ka-Te,Li, Peng,He, Bin,Guo, Xu,Zhong, Jun-Qiao,Zhang, Qi-Yu,Shi, Hong-Qi,Song, Qi-Tong,Yu, Zheng-Ping,Shan, Yun-Feng Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.3
Aim: To study any correlation of LKB1 expression with prognosis in hepatocellular carcinoma (HCC) cases. Methods: A total of 70 HCC patients and 20 primary intrahepatic stone patients in the first affiliated hospital of Wenzhou Medical College were enrolled in this study. LKB1 expression was detected by immunohistochemistry. Patients were followed-up and prognostic factors were evaluated. Result: LKB1 expression was decreased in the HCC samples. Loss of LKB1 expression in HCC was significantly related to histologic grade (P=0.010), vascular invasion (P=0.025) and TMN stage (P=0.011). Patients showing negative LKB1 expression had a significantly shorter disease-free and overall survival than those with positive expression (P = 0.001, P=0.000, respectively). Multivariate Cox regression analysis indicated that LKB1 expression level was an independent factor of survival (P = 0.033). Conclusion: HCC patients with decreased expression LKB1 have a poor prognosis. The loss of LKB1 expression is correlated with a lower survival rate.
Implication of Polymorphisms in DNA Repair Genes in Prognosis of Hepatocellular Carcinoma
Yue, Ai-Min,Xie, Zhen-Bin,Guo, Shu-Ping,Wei, Qi-Dong,Yang, Xiao-Wei Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.1
XRCC1 genetic polymorphisms could be associated with increased risk of various cancer, including hepatocellular carcinoma (HCC), the fifth most common cancer. We here conducted a study to explore the role of selective SNPs of the XRCC1 and XPD genes in the prognosis of HCC. A total of 231 cases were collected, and genotyping of XRCC1 Arg194Trp, XRCC1 Arg399Gln, XPD Lys751Gln and XPD Asp312Asn was performed by duplex polymerase-chain-reaction with the confronting-two-pair primer method. Our findings indicated XRCC1 399Gln/Gln genotype was associated with a significant difference in the median survival time compared with patients carrying Arg/Trp and Arg/Arg genotypes, and individuals with XPD 751 Gln/ Gln genotype had a significantly greater survival time than patients carrying Lys/Lys and Lys/Gln genotypes. The Cox's regression analysis showed individuals carrying XRCC1 399Trp/Trp genotype had 0.55 fold risk of death from HCC than Arg/Arg genotype. Similarly, XPD 751Gln/Gln had a strong decreasein comparison to XPD Lys/Lys carriers with an HR of 0.34. These results suggest that polymorphisms in XRCC1 and XPD may have functional significance in the prognosis of HCC.
Mi Lin,Qi-Yue Chen,Chao-Hui Zheng,Ping Li,Jian-Wei Xie,Jia-Bin Wang,Jian-Xian Lin,Chang-Ming Huang 대한암학회 2021 Cancer Research and Treatment Vol.53 No.4
Purpose This study aimed to evaluate the effect of preoperative tumor staging deviation (PTSD) on the long-term survival of patients undergoing radical gastrectomy for gastric cancer (RGGC). Materials and Methods Clinicopathological data of 2,346 patients who underwent RGGC were retrospectively analyzed. The preoperative tumor-lymph node-metastasis (TNM) under-staging group (uTNM) comprised patients who had earlier preoperative TNM than postoperative TNM, and the no preoperative under-staging group (nTNM) comprised the remaining patients. Results There were 1,031 uTNM (44.0%) and 1,315 nTNM cases (56.0%). Cox prognostic analysis revealed that PTSD independently affected the overall survival (OS) after surgery. The 5-year OS was lower in the uTNM group (41.8%) than in the nTNM group (71.6%). The patients less than 65 years old, with lower American Society of Anaesthesiologists score, 2-5 cm tumor located at the lower stomach, and cT1 or cN0 preoperative staging would more likely undergo D1+ lymph node dissection (LND) in uTNM (p < 0.05). Logistic analyses revealed that tumor size > 2 cm and body mass index ≤ 22.72 kg/m2 were independent risk factors of preoperative TNM tumor under-staging in patients with cT1N0M0 staging (p < 0.05). Conclusion Underestimated tumor staging is not rare, which possibly results in inadequate LND and affects the long-term survival for patients undergoing RGGC. D2 LND should be carefully performed in patients who are predisposed to this underestimation.
Yuan-ming Li,Qi-Bin Yue,Hua-Ying Li,Hui-Bo He 한국정밀공학회 2018 International Journal of Precision Engineering and Vol.19 No.10
TiAlN coating was deposited on the surface of 20Cr steel samples by physical vapor deposition. TiAlN coated samples and 20Cr steel matrix samples were in three conditions of friction to do reciprocating friction and wear tests with a Si3N4 ceramic ball friction pair which was loaded 2, 5 and 8 N. The wear images and the distribution of elements were obtained by the scanning electron microscope and the energy spectrometer respectively. Then the three-dimensional profile meter was used to get the profile of the grinding marks and the step meter gained two-dimensional contour curve. Results of investigation showed that the friction coefficient of TiAlN waterbased lubrication friction increased with the increase of the load, and TiAlN oil-based lubrication friction had the same rule. Under 5 and 8 N loads, the friction coefficients were higher than both of TiAlN and 20Cr steel matrix dry friction in the middle friction stage. As concluded through the experimental analysis, abrasive wear was the main wear mechanism of dry friction; the fatigue wear and oxidation wear were accompanied in some conditions. Water had a great influence on the micro morphology of the grinding mark. The wear of 20Cr steel matrix is the most serious.
A Study on Major Factors Influencing Dry Cutting Temperature of AISI 304 Stainless Steel
Hui-Bo He,Hua-Ying Li,Jun Yang,Xian-Yin Zhang,Qi-Bin Yue,Xue Jiang,류성기 한국정밀공학회 2017 International Journal of Precision Engineering and Vol.18 No.10
TiN coated and uncoated tools were used to conduct the dry cutting temperatures for AISI 304 stainless steel. Effects of cutting variables on cutting temperatures were investigated using single factor experiment method. The optimal cutting parameters of cutting temperatures were obtained through orthogonal experiment method. The forming process and temperature distribution of chips were analyzed using finite element method (FEM). The results show that cutting temperature generally increases with the increase of cutting speed and feed rate. When depth of cut increases at the range of 0.8-1.5 mm, the cutting temperature increases firstly and decreases subsequently. And the cutting temperature of TiN coated tool is lower than that of uncoated tool. The optimal parameters of cutting temperature are obtained by orthogonal experiment, which is A1B1C3. The highest temperature appears on the second deformation zone by the simulation.
Research on the Cutting Performances and Wear Mechanisms of TiAlCrN Coated Tools during Dry Turning
Hui-Bo He,Hua-Ying Li,Xian-Ying Zhang,Qi-Bin Yue,Jun Zhang,Lu Ma,Yuan-ming Li 한국정밀공학회 2019 International Journal of Precision Engineering and Vol.20 No.2
Physical vapour deposition technique was used to deposit TiAlCrN coatings on the YT15 tungsten carbide inserts. The dry turning tests of 20CrMo steel were carried out to evaluate performances of TiAlCrN coated and uncoated tools on the CA6140A lathe. The effect of the two kinds of tools on cutting forces, cutting temperature, surface roughness and tool wear had been investigated to assess the performance of TiAlCrN coated tools. The results showed that the cutting force and cutting temperature obtained by TiAlCrN coated tools were decreased and the TiACrN coated tools produced a better surface finish in comparison with the uncoated tools. The TiAlCrN coated tools yield working life about 45 min, which was two times of that for uncoated tools. The wear mechanisms of the TiAlCrN coated tools were mainly oxidation and boundary wear, accompanied with diffusion wear.