http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Hai Le Xuan,Quoc-Dong Hoang,Soon Geul Lee,Dat Pham Xuan,Hoang Tran Viet,Minh Pham Van,Hung Pham Van,Hung Pham Viet,PHAM DUC TUAN,Duc Anh Nguyen 대한기계학회 2022 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.36 No.2
Ballbots, which have been studied for over ten years, are under-actuated mobile robots that operate using the inverted pendulum paradigm. Controlling a ballbot poses a number of challenges, including maintaining the stable upright posture from the ground in all directions and making sure it follows the desired trajectory. External factors such as a minor change in contact surface properties or fabrication errors can affect the system's stabilization and transfer capabilities. In this study, an adaptive hierarchical sliding mode control algorithm based on an artificial neural network is developed to make the ballbot robust to external factors. The use of the proposed controller ensures system stability despite uncertainties including friction, accidental centrifugal forces and gravity that occur when the ballbot follows the reference trajectory. The system stability is guaranteed on the basis of Lyapunov theory. Control efficiency and robot stability under system uncertainties are demonstrated by numerical simulation.
Van-Hoang Tran,Thanh-Huan Nguyen,Frédéric Plourde,Khanh-Duy Cong Do,Duy-Hung Chung,Cong-Truong Dinh,Gia-Diem Pham 한국유체기계학회 2023 International journal of fluid machinery and syste Vol.16 No.2
In order to increase turbine efficiency while retaining structural integrity, modern jet engines need an effective cooling system. Pin-fin arrays play a significant role in the internal cooling system of the turbine blade. In examining the efficacy of cooling techniques using pin-fins, the other papers focus on pin-fin configurations. In contrast, the current study is a step toward optimizing cooling cascade endwalls for better maneuvering and reservation of vortices, which leads to more considerable heat transfer near the endwalls. This study examines the flow field and heat transfer of roughed endwall in the pin-fin channel, including varieties with flat endwall and extruded endwall. The heat transfer of the channel and pressure drop properties of the extruded endwall case are quantitatively assessed to contrast with those of the flat endwalls scenario for an intake Reynolds number range of 7400 to 36000. The leading and trailing surfaces of the channel are divided into five streamwise regions to understand better how well the pin-fins and endwalls transmit heat. The results show that the new endwall construction significantly increases the high heat transfer zones around the pin-fins compared to the flat endwall scenario. In the meantime, the heat transfer of the channel to the pin-fins is enhanced by the modified endwall configuration. The redesigned endwall outperformed the basic case regarding the HTEI, rising by 15.9%. It is found that the friction factor of the new design is increased due to the narrowing channel. However, due to their much higher heat transfer capacity, the HTEI of extruded endwall is up to 41.5% higher than the HTEI of the channel with flat endwalls. These results demonstrate that the heat transfer properties of pin-fins can be significantly improved by optimizing endwall design.
Hung-Cuong Trinh,Van-Huy Pham,Anh H. Vo 한국인터넷정보학회 2023 KSII Transactions on Internet and Information Syst Vol.17 No.12
Ensuring reliability of a machinery system involve the prediction of remaining useful life (RUL). In most RUL prediction approaches, noise is always considered for removal. Nevertheless, noise could be properly utilized to enhance the prediction capabilities. In this paper, we proposed a novel RUL prediction approach based on noise injection and a Kalman filter ensemble of modified bagging predictors. Firstly, we proposed a new method to insert Gaussian noises into both observation and feature spaces of an original training dataset, named GN-DAFC. Secondly, we developed a modified bagging method based on Kalman filter averaging, named KBAG. Then, we developed a new ensemble method which is a Kalman filter ensemble of KBAGs, named DKBAG. Finally, we proposed a novel RUL prediction approach GN-DAFC-DKBAG in which the optimal noise-injected training dataset was determined by a GN-DAFC-based searching strategy and then inputted to a DKBAG model. Our approach is validated on the NASA C-MAPSS dataset of aero-engines. Experimental results show that our approach achieves significantly better performance than a traditional Kalman filter ensemble of single learning models (KESLM) and the original DKBAG approaches. We also found that the optimal noise-injected data could improve the prediction performance of both KESLM and DKBAG. We further compare our approach with two advanced ensemble approaches, and the results indicate that the former also has better performance than the latters. Thus, our approach of combining optimal noise injection and DKBAG provides an effective solution for RUL estimation of machinery systems.
Hang T. Dao,George A.C. Beattie,Gillian W. Watson,Van Lam Pham,Van Liem Nguyen,Duc Khanh Le,Thi Hoa Nguyen,Viet Nguyen,Paul Holford 한국응용곤충학회 2018 Journal of Asia-Pacific Entomology Vol.21 No.1
Armoured scales (Hemiptera: Diaspididae) belong to the largest scale insect family and are among the mostinvasive insects in the world. Accurate identification of armoured scales is essential for systematic and phylogeneticstudies; biogeography; trade and plant quarantine; and pest management, particularly biological control. Several species are serious pests of citrus. Records of past field surveys conducted in Viet Nam between 1967 and2010 indicated the presence of 28 species on citrus there. Discrepancies in these records, and the retention ofspecimens of only five species in collections, led us to undertake surveys throughout the citrus-growing regionsof the country in 2013 and 2014 to verify previous records and conserve voucher specimens. The presence of 21diaspidid species was confirmed based on morphological and molecular data. The species observed werecommon but rarely abundant. Populations in commercial orchards may have been influenced by use of pesticides,but most species were recorded also in gardens and orchards where pesticide use was uncommon. Naturalenemies were abundant, but were not thoroughly documented for all the diaspidids we observed. An identificationkey to the species collected is provided. Differences between our findings and previous records from VietNam, from Yunnan and Guangxi in China, and from Indochinese countries neighbouring Viet Nam, indicate theneed for extensive surveys to fully document the diaspidid fauna on citrus in the region.
Pham, Duc Cuong,Na, Kyung-Hwan,Pham, Van Hung,Yoon, Eui-Sung Korean Tribology Society 2009 KSTLE International Journal Vol.10 No.1
This paper reports an investigation on nanotribological properties of silicon nanochannels coated by a diamond-like carbon (DLC) film. The nanochannels were fabricated on Si (100) wafers by using photolithography and reactive ion etching (RIE) techniques. The channeled surfaces (Si channels) were then further modified by coating thin DLC film. Water contact angle of the modified and unmodified Si surfaces was examined by an anglemeter using the sessile-drop method. Nanotribological properties, namely friction and adhesion forces, of the Si channels coated with DLC (DLC-coated Si channels) were investigated in comparison with those of the flat Si, DLC-coated flat Si (flat DLC), and Si channels, using an atomic force microscope (AFM). Results showed that the DLC-coated Si channels greatly increased hydrophobicity of silicon surfaces. The DLC coating and Si channels themselves individually reduced adhesion and friction forces of the flat Si. Further, the DLC-coated Si channels exhibited the lowest values of these forces, owing to the combined effect of reduced contact area through the channeling and low surface energy of the DLC. This combined modification could prove a promising method for tribological applications at small scales.
Adhesion of Human Osteoblasts Cell on TiN Thin Film Deposited by Cathodic Arc Plasma Deposition
Vuong Hung Pham,Sun Kyu Kim,Vinh Van Le,Byoung Se Kwon 한국표면공학회 2008 한국표면공학회지 Vol.41 No.6
Interaction between human osteoblast and TiN films was conducted in vitro. TiN films were produced by cathodic arc plasma deposition. The surface was characterized by atomic force microscopy (AFM). TiN films, glass substrates and Ti films were cultured with human osteoblasts for 48 and 72 h hours. Actin stress fiber patterns and microtubules of osteoblasts were found slightly more organized and distributed on TiN films compared to those on the Ti films and the glass substrates. Human osteoblasts also showed slightly higher cell attachment, proliferation, and focal contact adhesion on TiN films compared to those on Ti films and glass substrates. Our results demonstrated that TiN films showed slightly better cellular adhesion of osteoblasts than Ti films and glass substrates in a short-time culture period.
Dinh Van Tuan,Dang Thi Thuy Ngan,Dao Vu Phuong Thao,Nguyen Thi Nguyet,Nguyen Thi Thuy,Nguyen Phuong Thuy,Vu Van Thu,Vuong-Pham Hung,Phuong Dinh Tam 한국물리학회 2022 Current Applied Physics Vol.43 No.-
A facile hydrothermal route was used to synthesize silver nanoparticle (AgNP)-decorated microflower molybdenum disulfide (MoS2-MF) for bio-electrochemical platform fabrication to detect nonenzymatic glucose concentration. The morphologies of the materials were studied by scanning electron microscopy, and their structural characteristics were analyzed by X-ray diffractometry and energy-dispersive X-ray spectroscopy. The electrochemical characteristics of the AgNPs/MoS2-MF/PtE biosensor were studied by cyclic voltammetry. The obtained data indicated that the developed nonenzymatic glucose sensor has a large linear response between 1.0 and 15.0 mM, a limit of detection of as low as 1.0 mM, and a sensitivity of 46.5 μA nM-1 cm-2. The biosensor also displayed outstanding selectivity, stability, reproducibility, and repeatability. Additionally, the AgNPs/MoS2-MF/ PtE biosensor was utilized to detect glucose concentration in real sample and showed practical application potential for glucose detection.